Catalan language updated to OrcaSlicer v2.3.0-beta (#8511)

Update OrcaSlicer_ja.po

Just added small translation for Japanese

build_release_macos.sh

@@ -3,7 +3,7 @@
 set -e
 set -o pipefail
 
-while getopts ":dpa:snt:xbc:h" opt; do
+while getopts ":dpa:snt:xbc:hu" opt; do
   case "${opt}" in
     d )
         export BUILD_TARGET="deps"
@@ -37,6 +37,9 @@ while getopts ":dpa:snt:xbc:h" opt; do
     1 )
         export CMAKE_BUILD_PARALLEL_LEVEL=1
         ;;
+    u )
+        export BUILD_UNIVERSAL="1"
+        ;;
     h ) echo "Usage: ./build_release_macos.sh [-d]"
         echo "   -d: Build deps only"
         echo "   -a: Set ARCHITECTURE (arm64 or x86_64)"
@@ -46,6 +49,7 @@ while getopts ":dpa:snt:xbc:h" opt; do
         echo "   -x: Use Ninja CMake generator, default is Xcode"
         echo "   -b: Build without reconfiguring CMake"
         echo "   -c: Set CMake build configuration, default is Release"
+        echo "   -u: Build universal binary (both arm64 and x86_64)"
         echo "   -1: Use single job for building"
         exit 0
         ;;
@@ -57,10 +61,18 @@ done
 # Set defaults
 
 if [ -z "$ARCH" ]; then
-  ARCH="$(uname -m)"
+  if [ "1." == "$BUILD_UNIVERSAL". ]; then
+    ARCH="universal"
+  else
+    ARCH="$(uname -m)"
+  fi
   export ARCH
 fi
 
+if [ "1." == "$BUILD_UNIVERSAL". ]; then
+  echo "Universal build enabled - will create a combined arm64/x86_64 binary"
+fi
+
 if [ -z "$BUILD_CONFIG" ]; then
   export BUILD_CONFIG="Release"
 fi
@@ -205,16 +217,71 @@ function build_slicer() {
     # zip -FSr OrcaSlicer${ver}_Mac_${ARCH}.zip OrcaSlicer.app
 }
 
+function build_universal() {
+    echo "Building universal binary..."
+    # Save current ARCH
+    ORIGINAL_ARCH="$ARCH"
+    
+    # Build x86_64
+    ARCH="x86_64"
+    PROJECT_BUILD_DIR="$PROJECT_DIR/build_$ARCH"
+    DEPS_BUILD_DIR="$DEPS_DIR/build_$ARCH"
+    DEPS="$DEPS_BUILD_DIR/OrcaSlicer_dep_$ARCH"
+    build_deps
+    build_slicer
+    
+    # Build arm64
+    ARCH="arm64"
+    PROJECT_BUILD_DIR="$PROJECT_DIR/build_$ARCH"
+    DEPS_BUILD_DIR="$DEPS_DIR/build_$ARCH"
+    DEPS="$DEPS_BUILD_DIR/OrcaSlicer_dep_$ARCH"
+    build_deps
+    build_slicer
+    
+    # Restore original ARCH
+    ARCH="$ORIGINAL_ARCH"
+    PROJECT_BUILD_DIR="$PROJECT_DIR/build_$ARCH"
+    DEPS_BUILD_DIR="$DEPS_DIR/build_$ARCH"
+    DEPS="$DEPS_BUILD_DIR/OrcaSlicer_dep_$ARCH"
+    
+    # Create universal binary
+    echo "Creating universal binary..."
+    PROJECT_BUILD_DIR="$PROJECT_DIR/build_Universal"
+    mkdir -p "$PROJECT_BUILD_DIR/OrcaSlicer"
+    UNIVERSAL_APP="$PROJECT_BUILD_DIR/OrcaSlicer/Universal_OrcaSlicer.app"
+    rm -rf "$UNIVERSAL_APP"
+    cp -R "$PROJECT_DIR/build_x86_64/OrcaSlicer/OrcaSlicer.app" "$UNIVERSAL_APP"
+    
+    # Get the binary path inside the .app bundle
+    BINARY_PATH="Contents/MacOS/OrcaSlicer"
+    
+    # Create universal binary using lipo
+    lipo -create \
+        "$PROJECT_DIR/build_x86_64/OrcaSlicer/OrcaSlicer.app/$BINARY_PATH" \
+        "$PROJECT_DIR/build_arm64/OrcaSlicer/OrcaSlicer.app/$BINARY_PATH" \
+        -output "$UNIVERSAL_APP/$BINARY_PATH"
+        
+    echo "Universal binary created at $UNIVERSAL_APP"
+}
+
 case "${BUILD_TARGET}" in
     all)
-        build_deps
-        build_slicer
+        if [ "1." == "$BUILD_UNIVERSAL". ]; then
+            build_universal
+        else
+            build_deps
+            build_slicer
+        fi
         ;;
     deps)
         build_deps
         ;;
     slicer)
-        build_slicer
+        if [ "1." == "$BUILD_UNIVERSAL". ]; then
+            build_universal
+        else
+            build_slicer
+        fi
         ;;
     *)
         echo "Unknown target: $BUILD_TARGET. Available targets: deps, slicer, all."

localization/i18n/ja/OrcaSlicer_ja.po

@@ -13355,7 +13355,7 @@ msgid ""
 msgstr ""
 
 msgid "Auto brim width"
-msgstr ""
+msgstr "オートブリム幅"
 
 msgid ""
 "Enabling this option means the width of the brim for tree support will be "
@@ -13363,7 +13363,7 @@ msgid ""
 msgstr ""
 
 msgid "Tree support brim width"
-msgstr "Tree support brim width"
+msgstr "ツリーサポートブリム幅"
 
 msgid "Distance from tree branch to the outermost brim line"
 msgstr ""
@@ -13410,7 +13410,7 @@ msgstr ""
 "ます。"
 
 msgid "Support wall loops"
-msgstr "Support wall loops"
+msgstr "サポートのウォール数"
 
 msgid "This setting specify the count of walls around support"
 msgstr "This setting specify the count of walls around support"
@@ -13441,7 +13441,7 @@ msgid ""
 msgstr ""
 
 msgid "Chamber temperature"
-msgstr "Chamber temperature"
+msgstr "庫内温度"
 
 msgid ""
 "For high-temperature materials like ABS, ASA, PC, and PA, a higher chamber "
@@ -14933,16 +14933,16 @@ msgstr ""
 "使用するIPアドレスを1つ選んでください。"
 
 msgid "PA Calibration"
-msgstr "PA Calibration"
+msgstr "PAキャリブレーション"
 
 msgid "DDE"
-msgstr ""
+msgstr "ダイレクトドライブ"
 
 msgid "Bowden"
-msgstr "Bowden"
+msgstr "ボーデン"
 
 msgid "Extruder type"
-msgstr ""
+msgstr "押出機タイプ"
 
 msgid "PA Tower"
 msgstr "PA Tower"
@@ -14954,10 +14954,10 @@ msgid "PA Pattern"
 msgstr "PA Pattern"
 
 msgid "Start PA: "
-msgstr "Start PA:"
+msgstr "開始PA:"
 
 msgid "End PA: "
-msgstr "End PA: "
+msgstr "終了PA: "
 
 msgid "PA step: "
 msgstr "PA step:"
@@ -15076,14 +15076,14 @@ msgid "Upload to storage"
 msgstr "ストレージへのアップロード"
 
 msgid "Switch to Device tab after upload."
-msgstr ""
+msgstr "アップロード後、デバイスタブに切り替える。"
 
 #, c-format, boost-format
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr "Filename to upload doesn't end with \"%s\". Do you want to continue?"
 
 msgid "Upload"
-msgstr "Upload"
+msgstr "アップロード"
 
 msgid "Print host upload queue"
 msgstr "Print host upload queue"
@@ -15095,14 +15095,14 @@ msgid "Progress"
 msgstr "Progress"
 
 msgid "Host"
-msgstr "Host"
+msgstr "ホスト"
 
 msgctxt "OfFile"
 msgid "Size"
-msgstr "Size of file"
+msgstr "ファイルサイズ"
 
 msgid "Filename"
-msgstr "Filename"
+msgstr "ファイル名"
 
 msgid "Cancel selected"
 msgstr "Cancel selected"
@@ -15117,7 +15117,7 @@ msgid "Uploading"
 msgstr "アップロード中"
 
 msgid "Cancelling"
-msgstr "Canceling"
+msgstr "キャンセル中"
 
 msgid "Error uploading to print host"
 msgstr "プリントホストへのアップロードに失敗"
@@ -15218,10 +15218,10 @@ msgid "Select filament preset"
 msgstr "Select filament preset"
 
 msgid "Create Filament"
-msgstr "Create Filament"
+msgstr "フィラメントを作成"
 
 msgid "Create Based on Current Filament"
-msgstr "Create Based on Current Filament"
+msgstr "現在のフィラメントを元に作成"
 
 msgid "Copy Current Filament Preset "
 msgstr "Copy Current Filament Preset "
@@ -15327,10 +15327,10 @@ msgid "Create Printer/Nozzle"
 msgstr "Create Printer/Nozzle"
 
 msgid "Create Printer"
-msgstr "Create Printer"
+msgstr "プリンターを作成"
 
 msgid "Create Nozzle for Existing Printer"
-msgstr "Create Nozzle for Existing Printer"
+msgstr "既存のプリンターに別サイズのノズル径を作成"
 
 msgid "Create from Template"
 msgstr "Create from Template"
@@ -15634,7 +15634,7 @@ msgid "Failed to create temporary folder, please try Export Configs again."
 msgstr "Failed to create temporary folder, please try Export Configs again."
 
 msgid "Edit Filament"
-msgstr "Edit Filament"
+msgstr "フィラメントを編集"
 
 msgid "Filament presets under this filament"
 msgstr "Filament presets under this filament"
@@ -15666,7 +15666,7 @@ msgid "+ Add Preset"
 msgstr "+ Add Preset"
 
 msgid "Delete Filament"
-msgstr "Delete Filament"
+msgstr "フィラメントを削除"
 
 msgid ""
 "All the filament presets belong to this filament would be deleted. \n"
@@ -15678,7 +15678,7 @@ msgstr ""
 "information for that slot."
 
 msgid "Delete filament"
-msgstr "Delete filament"
+msgstr "フィラメントを削除"
 
 msgid "Add Preset"
 msgstr "Add Preset"
@@ -15696,7 +15696,7 @@ msgid "[Delete Required]"
 msgstr "[Delete Required]"
 
 msgid "Edit Preset"
-msgstr "Edit Preset"
+msgstr "プリセットを編集"
 
 msgid "For more information, please check out Wiki"
 msgstr "For more information, please check out our Wiki"
@@ -15705,7 +15705,7 @@ msgid "Collapse"
 msgstr "Collapse"
 
 msgid "Daily Tips"
-msgstr "Daily Tips"
+msgstr "今日のヒント"
 
 #, c-format, boost-format
 msgid "nozzle memorized: %.1f %s"
@@ -15723,7 +15723,7 @@ msgid "*Printing %s material with %s may cause nozzle damage"
 msgstr "*Printing %s material with %s may cause nozzle damage"
 
 msgid "Need select printer"
-msgstr "Need select printer"
+msgstr "プリンターを選ぶ必要があります"
 
 msgid "The start, end or step is not valid value."
 msgstr "The start, end or step is not valid value."
@@ -15745,13 +15745,13 @@ msgid "Test"
 msgstr "テスト"
 
 msgid "Could not get a valid Printer Host reference"
-msgstr "Could not get a valid Printer Host reference"
+msgstr "有効なプリンタホスト参照を取得できませんでした"
 
 msgid "Success!"
-msgstr "Success!"
+msgstr "成功!"
 
 msgid "Are you sure to log out?"
-msgstr ""
+msgstr "本当にログアウトしますか？"
 
 msgid "Refresh Printers"
 msgstr "Refresh Printers"
@@ -16149,9 +16149,9 @@ msgid ""
 "height, and results in very apparent layer lines and much lower printing "
 "quality, but shorter printing time in some printing cases."
 msgstr ""
-"Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer "
-"height. This results in very apparent layer lines and much lower print "
-"quality but shorter print time in some cases."
+"0.8mmノズルのデフォルト・プロファイルと比較すると、レイヤーの高さが大きくなっています。"
+"その結果、レイヤーラインが非常に目立ち、印刷品質が大幅に低下しますが、"
+"場合によっては印刷時間が短縮されます。"
 
 msgid ""
 "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger "
@@ -16247,18 +16247,25 @@ msgid ""
 "Did you know that calibrating your printer can do wonders? Check out our "
 "beloved calibration solution in OrcaSlicer."
 msgstr ""
+"キャリブレーション\n"
+"プリンターを校正することで、素晴らしい効果が得られることをご存知ですか？"
+"オルカスライサーの校正（キャリブレーション）ソリューションをご覧ください。"
 
 #: resources/data/hints.ini: [hint:Auxiliary fan]
 msgid ""
 "Auxiliary fan\n"
 "Did you know that OrcaSlicer supports Auxiliary part cooling fan?"
 msgstr ""
+"補助部品冷却ファン\n"
+"OrcaSlicerが補助部品冷却ファンをサポートしていることをご存知ですか？"
 
 #: resources/data/hints.ini: [hint:Air filtration]
 msgid ""
 "Air filtration/Exhaust Fan\n"
 "Did you know that OrcaSlicer can support Air filtration/Exhaust Fan?"
 msgstr ""
+"空気ろ過/排気ファン\n"
+"OrcaSlicerが空気ろ過/排気ファンに対応していることをご存知ですか？"
 
 #: resources/data/hints.ini: [hint:G-code window]
 msgid ""
@@ -16524,10 +16531,10 @@ msgid ""
 "extruder/hotend clogging when printing lower temperature filament with a "
 "higher enclosure temperature. More info about this in the Wiki."
 msgstr ""
-"When do you need to print with the printer door opened?\n"
-"Did you know that opening the printer door can reduce the probability of "
-"extruder/hotend clogging when printing lower temperature filament with a "
-"higher enclosure temperature? There is more info about this in the Wiki."
+"プリンターのドアを開けたまま印刷する必要があるのはどんなときですか？\n"
+"エンクロージャーの温度が高い状態で低温のフィラメントをプリントする場合、"
+"プリンターのドアを開けると、エクストルーダーやホットエンドが"
+"詰まる確率が下がることをご存知ですか？これについてはWikiに詳しい情報があります。"
 
 #: resources/data/hints.ini: [hint:Avoid warping]
 msgid ""
@@ -16536,13 +16543,13 @@ msgid ""
 "ABS, appropriately increasing the heatbed temperature can reduce the "
 "probability of warping."
 msgstr ""
-"Avoid warping\n"
-"Did you know that when printing materials that are prone to warping such as "
-"ABS, appropriately increasing the heatbed temperature can reduce the "
-"probability of warping?"
+"反りを避ける\n"
+"ABSのような反りやすい素材を印刷する場合、"
+"ヒートベッドの温度を適切に上げることで、"
+"反りが発生する確率を下げることができることをご存知ですか？"
 
 #~ msgid "Current Cabin humidity"
-#~ msgstr "Current Cabin humidity"
+#~ msgstr "現在の庫内湿度"
 
 #~ msgid "Stopped."
 #~ msgstr "中止しました"
@@ -16552,7 +16559,7 @@ msgstr ""
 #~ msgstr "接続に失敗しました (%d)"
 
 #~ msgid "Initialize failed (Device connection not ready)!"
-#~ msgstr "Initialization failed (Device connection not ready)!"
+#~ msgstr "初期化に失敗しました（デバイス接続の準備ができていません)!"
 
 #, c-format, boost-format
 #~ msgid "Initialize failed (%s)!"
@@ -16578,7 +16585,7 @@ msgstr ""
 #~ "pingを実行します。"
 
 #~ msgid "IP and Access Code Verified! You may close the window"
-#~ msgstr "IP and Access Code Verified! You may close the window"
+#~ msgstr "IPとアクセスコードが確認されました！ウィンドウを閉じてください"
 
 #~ msgid "Force cooling for overhang and bridge"
 #~ msgstr "ｵｰﾊﾞｰﾊﾝｸﾞとﾌﾞﾘｯｼﾞの冷却"
@@ -16744,10 +16751,10 @@ msgstr ""
 #~ msgstr "ワイプタワーエクストルーダー"
 
 #~ msgid "Please input a valid value (K in 0~0.3)"
-#~ msgstr "Please input a valid value (K in 0~0.3)"
+#~ msgstr "有効な値を入力してください (K in 0~0.3)"
 
 #~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)"
-#~ msgstr "Please input a valid value (K in 0~0.3, N in 0.6~2.0)"
+#~ msgstr "有効な値を入力してください (K in 0~0.3, N in 0.6~2.0)"
 
 #~ msgid "Printer local connection failed, please try again."
 #~ msgstr "Printer local connection failed; please try again."
@@ -16931,7 +16938,7 @@ msgstr ""
 
 #, c-format, boost-format
 #~ msgid "Load failed [%d]"
-#~ msgstr "Load failed [%d]"
+#~ msgstr "ロード失敗 [%d]"
 
 #~ msgid "Failed to fetching model information from printer."
 #~ msgstr "Failed to fetch model information from printer."
@@ -17005,7 +17012,7 @@ msgstr ""
 #~ "No one part is selected to keep after cut"
 
 #~ msgid "Edit Text"
-#~ msgstr "Edit Text"
+#~ msgstr "テキストを編集"
 
 #~ msgid "Error! Unable to create thread!"
 #~ msgstr "エラー：スレッドを作成できません"
@@ -17017,25 +17024,25 @@ msgstr ""
 #~ msgstr "Choose SLA archive:"
 
 #~ msgid "Import file"
-#~ msgstr "Import file"
+#~ msgstr "ファイルインポート"
 
 #~ msgid "Import model and profile"
-#~ msgstr "Import model and profile"
+#~ msgstr "モデルとプロファイルを取り込む"
 
 #~ msgid "Import profile only"
-#~ msgstr "Import profile only"
+#~ msgstr "プロファイルのみ取り込む"
 
 #~ msgid "Import model only"
-#~ msgstr "Import model only"
+#~ msgstr "モデルのみ取り込む"
 
 #~ msgid "Accurate"
-#~ msgstr "Accurate"
+#~ msgstr "緻密"
 
 #~ msgid "Balanced"
-#~ msgstr "Balanced"
+#~ msgstr "バランス"
 
 #~ msgid "Quick"
-#~ msgstr "Quick"
+#~ msgstr "高速"
 
 #~ msgid ""
 #~ "Discribe how long the nozzle will move along the last path when retracting"
@@ -17052,7 +17059,7 @@ msgstr ""
 #~ "右クリックし、メニューで選択できます。"
 
 #~ msgid "Filling bed "
-#~ msgstr "Filling bed"
+#~ msgstr "ベッドをこのオブジェクトで満たす"
 
 #, boost-format
 #~ msgid "%1% infill pattern doesn't support 100%% density."
@@ -17084,7 +17091,7 @@ msgstr ""
 
 #, c-format, boost-format
 #~ msgid " doesn't work at 100%% density "
-#~ msgstr " doesn't work at 100%% density "
+#~ msgstr "100%% の密度では使用できません"
 
 #~ msgid "Ctrl + Shift + Enter"
 #~ msgstr "Ctrl + Shift + Enter"
@@ -17245,7 +17252,7 @@ msgstr ""
 #~ msgstr "指定したファイルリストからフィラメント設定を読込む"
 
 #~ msgid "Skip Objects"
-#~ msgstr "Skip Objects"
+#~ msgstr "オブジェクトスキップ"
 
 #~ msgid "Skip some objects in this print"
 #~ msgstr "Skip some objects in this print"
@@ -17286,7 +17293,7 @@ msgstr ""
 #~ msgstr "Embedded"
 
 #~ msgid "Online Models"
-#~ msgstr "Online Models"
+#~ msgstr "オンラインモデル"
 
 #~ msgid "Show online staff-picked models on the home page"
 #~ msgstr "Show online staff-picked models on the home page"
@@ -17324,7 +17331,7 @@ msgstr ""
 #~ msgstr "底面との隙間があります、レイヤーを入れ替えました"
 
 #~ msgid "The model has too many empty layers."
-#~ msgstr "このモデルには空層があります。"
+#~ msgstr "このモデルには空の層があります。"
 
 #~ msgid "Cali"
 #~ msgstr "標定"
@@ -17333,7 +17340,7 @@ msgstr ""
 #~ msgstr "押出のキャリブレーション"
 
 #~ msgid "Push new filament into the extruder"
-#~ msgstr "Push new filament into the extruder"
+#~ msgstr "新しいフィラメントを押出機に挿入してください"
 
 #, c-format, boost-format
 #~ msgid ""
@@ -17356,7 +17363,7 @@ msgstr ""
 #~ "ドアを開いて換気を良くするか、ベッド温度を下げてください。"
 
 #~ msgid "Total Time Estimation"
-#~ msgstr "Total Time Estimation"
+#~ msgstr "予想合計時間"
 
 #~ msgid "Resonance frequency identification"
 #~ msgstr "共振特性測定"

localization/i18n/pt_BR/OrcaSlicer_pt_BR.po

@@ -4,7 +4,7 @@ msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2025-02-20 21:21+0800\n"
-"PO-Revision-Date: 2025-02-17 11:39-0300\n"
+"PO-Revision-Date: 2025-02-21 11:24-0300\n"
 "Last-Translator: Alexandre Folle de Menezes <afmenez@terra.com.br>\n"
 "Language-Team: Portuguese, Brazilian\n"
 "Language: pt_BR\n"
@@ -1372,13 +1372,13 @@ msgid ""
 msgstr ""
 
 msgid "Warning:please select Plane's feature."
-msgstr ""
+msgstr "Aviso: por favor selecione o recurso do Plano."
 
 msgid "Warning:please select Point's or Circle's feature."
-msgstr ""
+msgstr "Aviso: por favor selecione o recurso do Ponto ou do Círculo."
 
 msgid "Warning:please select two different mesh."
-msgstr ""
+msgstr "Aviso: por favor selecione duas malhas diferentes."
 
 msgid "Copy to clipboard"
 msgstr "Copiar para a área de transferência"
@@ -4134,7 +4134,7 @@ msgid "Input value is out of range"
 msgstr "Valor de entrada está fora do limite"
 
 msgid "Some extension in the input is invalid"
-msgstr ""
+msgstr "Alguma extensão na entrada é inválida"
 
 #, boost-format
 msgid "Invalid format. Expected vector format: \"%1%\""
@@ -5265,6 +5265,8 @@ msgid ""
 "Please check if the SD card is inserted into the printer.\n"
 "If it still cannot be read, you can try formatting the SD card."
 msgstr ""
+"Por favor verifique se o cartão SD está inserido na impressora.\n"
+"Se ele ainda não puder ser lido, você pode tentar formatar o cartão SD."
 
 msgid "LAN Connection Failed (Failed to view sdcard)"
 msgstr "Falha na conexão LAN (Falha para ver o cartão SD)"
@@ -5725,14 +5727,18 @@ msgid ""
 "The server is unable to respond. Please click the link below to check the "
 "server status."
 msgstr ""
+"O servidor não consegue responder. Por favor clique no link abaixo para "
+"verificar o status do servidor."
 
 msgid ""
 "If the server is in a fault state, you can temporarily use offline printing "
 "or local network printing."
 msgstr ""
+"Se o servidor estiver em estado de falha, você poderá usar temporariamente a "
+"impressão offline ou a impressão em rede local."
 
 msgid "How to use LAN only mode"
-msgstr ""
+msgstr "Como usar o modo somente LAN"
 
 msgid "Don't show this dialog again"
 msgstr "Não mostrar esse diálogo novamente"
@@ -6685,7 +6691,7 @@ msgid "with OrcaSlicer so that Orca can open models from"
 msgstr ""
 
 msgid "Current Association: "
-msgstr "Associação Atual:"
+msgstr "Associação Atual: "
 
 msgid "Current Instance"
 msgstr "Instância Atual"
@@ -6854,10 +6860,10 @@ msgstr ""
 "dispositivos ao mesmo tempo e gerenciar vários dispositivos."
 
 msgid "Auto arrange plate after cloning"
-msgstr ""
+msgstr "Organizar automaticamente a mesa após a clonagem"
 
 msgid "Auto arrange plate after object cloning"
-msgstr ""
+msgstr "Organizar automaticamente a mesa após a clonagem de objeto"
 
 msgid "Network"
 msgstr "Rede"
@@ -8054,7 +8060,7 @@ msgid "Nozzle temperature when printing"
 msgstr "Temperatura do bico ao imprimir"
 
 msgid "Cool Plate (SuperTack)"
-msgstr ""
+msgstr "Mesa Fria (SuperTack)"
 
 msgid ""
 "Bed temperature when cool plate is installed. Value 0 means the filament "
@@ -8072,7 +8078,7 @@ msgstr ""
 "significa que o filamento não suporta impressão na cool plate"
 
 msgid "Textured Cool plate"
-msgstr ""
+msgstr "Mesa Fria texturizada"
 
 msgid ""
 "Bed temperature when cool plate is installed. Value 0 means the filament "
@@ -8090,16 +8096,16 @@ msgstr ""
 "significa que o filamento não suporta impressão na Mesa de Engenharia"
 
 msgid "Smooth PEI Plate / High Temp Plate"
-msgstr "Mesa PEI lisa / Mesa de alta temperatura"
+msgstr "Mesa PEI Lisa / Mesa de Alta Temperatura"
 
 msgid ""
 "Bed temperature when Smooth PEI Plate/High temperature plate is installed. "
 "Value 0 means the filament does not support to print on the Smooth PEI Plate/"
 "High Temp Plate"
 msgstr ""
-"Temperatura da mesa quando a mesa PEI lisa/ de alta temperatura está "
+"Temperatura da mesa quando a Mesa PEI Lisa/Mesa de Alta Temperatura está "
 "instalada. O valor 0 significa que o filamento não suporta a impressão na "
-"Mesa PEI lisa/Mesa de Alta Temperatura"
+"Mesa PEI Lisa/Mesa de Alta Temperatura"
 
 msgid "Textured PEI Plate"
 msgstr "Mesa PEI Texturizada"
@@ -8295,7 +8301,7 @@ msgid "Layer height limits"
 msgstr "Limites de altura da camada"
 
 msgid "Z-Hop"
-msgstr ""
+msgstr "Z-Hop"
 
 msgid "Retraction when switching material"
 msgstr "Retração ao trocar material"
@@ -8606,11 +8612,11 @@ msgid "Obj file Import color"
 msgstr ""
 
 msgid "Specify number of colors:"
-msgstr ""
+msgstr "Especifique a quantidade de cores:"
 
 #, c-format, boost-format
 msgid "The color count should be in range [%d, %d]."
-msgstr ""
+msgstr "A quantidade de cores deve estar na faixa [%d, %d]."
 
 msgid "Recommended "
 msgstr "Recomendado "
@@ -9145,7 +9151,7 @@ msgid "Connect"
 msgstr "Conectar"
 
 msgid "Manual Setup"
-msgstr ""
+msgstr "Configuração Manual"
 
 msgid "connecting..."
 msgstr "conectando..."
@@ -10056,16 +10062,16 @@ msgid "Bed types supported by the printer"
 msgstr "Tipos de mesa suportadas pela impressora"
 
 msgid "Smooth Cool Plate"
-msgstr ""
+msgstr "Mesa Fria Lisa"
 
 msgid "Engineering Plate"
 msgstr "Engenharia Plate"
 
 msgid "Smooth High Temp Plate"
-msgstr ""
+msgstr "Mesa de Alta Temp. Lisa"
 
 msgid "Textured Cool Plate"
-msgstr ""
+msgstr "Mesa Fria Texturizada"
 
 msgid "First layer print sequence"
 msgstr "Sequência de impressão da primeira camada"
@@ -10294,6 +10300,11 @@ msgid ""
 "The actual top surface flow used is calculated by multiplying this value "
 "with the filament flow ratio, and if set, the object's flow ratio."
 msgstr ""
+"Este fator afeta a quantidade de material para preenchimento sólido superior. Você "
+"pode diminuí-lo ligeiramente para ter um acabamento de superfície suave. \n"
+"\n"
+"O real fluxo de superfície superior usado é calculado multiplicando este valor pela "
+"taxa de fluxo do filamento e, se definido, pela taxa de fluxo do objeto."
 
 msgid "Bottom surface flow ratio"
 msgstr "Fluxo em superfície inferior"
@@ -10304,6 +10315,10 @@ msgid ""
 "The actual bottom solid infill flow used is calculated by multiplying this "
 "value with the filament flow ratio, and if set, the object's flow ratio."
 msgstr ""
+"Este fator afeta a quantidade de material para preenchimento sólido do fundo. \n"
+"\n"
+"O real fluxo de preenchimento sólido do fundo usado é calculado multiplicando este "
+"valor pela taxa de fluxo do filamento e, se definido, pela taxa de fluxo do objeto."
 
 msgid "Precise wall"
 msgstr "Parede precisa"
@@ -10312,6 +10327,8 @@ msgid ""
 "Improve shell precision by adjusting outer wall spacing. This also improves "
 "layer consistency."
 msgstr ""
+"Melhora a precisão da casca ajustando o espaçamento da parede externa. Isso "
+"também melhora a consistência da camada."
 
 msgid "Only one wall on top surfaces"
 msgstr "Perímetro único em superfícies superiores"
@@ -10544,7 +10561,7 @@ msgstr ""
 "automaticamente."
 
 msgid "Painted"
-msgstr ""
+msgstr "Pintado"
 
 msgid "Brim-object gap"
 msgstr "Espaço entre a borda e objeto"
@@ -11422,13 +11439,16 @@ msgid ""
 msgstr ""
 
 msgid "Tool change time"
-msgstr ""
+msgstr "Tempo de troca de ferramenta"
 
 msgid ""
 "Time taken to switch tools. It's usually applicable for tool changers or "
 "multi-tool machines. For single-extruder multi-material machines, it's "
 "typically 0. For statistics only"
 msgstr ""
+"Tempo gasto para trocar ferramentas. Geralmente é aplicável para trocadores "
+"de ferramentas ou máquinas multi-ferramentas. Para máquinas multi-materiais "
+"de extrusora única, é tipicamente 0. Apenas para estatísticas"
 
 msgid ""
 "Filament diameter is used to calculate extrusion in gcode, so it's important "
@@ -11725,7 +11745,7 @@ msgid "Grid"
 msgstr "Grade"
 
 msgid "2D Lattice"
-msgstr ""
+msgstr "Malha 2D"
 
 msgid "Line"
 msgstr "Linha"
@@ -12130,7 +12150,7 @@ msgstr ""
 "Não imprimir preenchimento de lacuna com um comprimento menor que o limiar "
 "especificado (em mm). Esta configuração se aplica ao preenchimento superior, "
 "inferior e sólido e, se estiver usando o gerador de perímetro clássico, ao "
-"preenchimento de lacuna de parede."
+"preenchimento de lacuna de parede. "
 
 msgid ""
 "Speed of gap infill. Gap usually has irregular line width and should be "
@@ -12851,7 +12871,7 @@ msgid "mm³/s²"
 msgstr "mm3/s2"
 
 msgid "Smoothing segment length"
-msgstr "Distancia do segmento de suavização"
+msgstr "Comprimento do segmento de suavização"
 
 msgid ""
 "A lower value results in smoother extrusion rate transitions. However, this "
@@ -12913,6 +12933,9 @@ msgid ""
 "minimum layer time defined above when the slowdown for better layer cooling "
 "is enabled."
 msgstr ""
+"A velocidade mínima de impressão para a qual a impressora diminui a "
+"velocidade para manter o tempo mínimo de camada definido acima quando a "
+"desaceleração para melhor resfriamento da camada está ativada."
 
 msgid "Diameter of nozzle"
 msgstr "Diâmetro do bico"
@@ -13020,6 +13043,8 @@ msgid ""
 "This option will drop the temperature of the inactive extruders to prevent "
 "oozing."
 msgstr ""
+"Esta opção diminuirá a temperatura das extrusoras inativas para evitar "
+"vazamentos."
 
 msgid "Filename format"
 msgstr "Formato do nome do arquivo"
@@ -13208,12 +13233,14 @@ msgid "Force a retraction when changes layer"
 msgstr "Forçar uma retração ao mudar de camada"
 
 msgid "Retract on top layer"
-msgstr ""
+msgstr "Retração na camada superior"
 
 msgid ""
 "Force a retraction on top layer. Disabling could prevent clog on very slow "
 "patterns with small movements, like Hilbert curve"
 msgstr ""
+"Forçar uma retração na camada superior. Desabilitar pode evitar obstrução em "
+"padrões muito lentos com pequenos movimentos, como a curva de Hilbert"
 
 msgid "Retraction Length"
 msgstr "Distância de retração"
@@ -13670,7 +13697,7 @@ msgid ""
 "skirt."
 msgstr ""
 "Combinado - saia única para todos os objetos, Por objeto - saias individuais "
-"por objeto"
+"por objeto."
 
 msgid "Combined"
 msgstr "Combinado"
@@ -13727,7 +13754,7 @@ msgid "Solid infill"
 msgstr "Preenchimento sólido"
 
 msgid "Filament to print solid infill"
-msgstr ""
+msgstr "Filamento para imprimir o preenchimento sólido"
 
 msgid ""
 "Line width of internal solid infill. If expressed as a %, it will be "
@@ -13816,9 +13843,12 @@ msgid ""
 "value is not used when 'idle_temperature' in filament settings is set to non "
 "zero value."
 msgstr ""
+"Diferença de temperatura a ser aplicada quando uma extrusora não estiver "
+"ativa. O valor não é usado quando 'idle_temperature' nas configurações de "
+"filamento é definido como valor diferente de zero."
 
 msgid "Preheat time"
-msgstr ""
+msgstr "Tempo de pré-aquecimento"
 
 msgid ""
 "To reduce the waiting time after tool change, Orca can preheat the next tool "
@@ -13826,14 +13856,21 @@ msgid ""
 "seconds to preheat the next tool. Orca will insert a M104 command to preheat "
 "the tool in advance."
 msgstr ""
+"Para reduzir o tempo de espera após a troca de ferramenta, o Orca pode pré-"
+"aquecer a próxima ferramenta enquanto a ferramenta atual ainda está em uso. "
+"Esta configuração especifica o tempo em segundos para pré-aquecer a próxima "
+"ferramenta. O Orca irá inserir um comando M104 para pré-aquecer a ferramenta "
+"com antecedência."
 
 msgid "Preheat steps"
-msgstr ""
+msgstr "Passos de pré-aquecimento"
 
 msgid ""
 "Insert multiple preheat commands(e.g. M104.1). Only useful for Prusa XL. For "
 "other printers, please set it to 1."
 msgstr ""
+"Insire múltiplos comandos de pré-aquecimento (por exemplo, M104.1). Útil "
+"apenas para Prusa XL. Para outras impressoras, defina como 1."
 
 msgid "Start G-code"
 msgstr "Código de Início"
@@ -13956,18 +13993,21 @@ msgid ""
 "Normal (manual) or Tree (manual) is selected, only support enforcers are "
 "generated"
 msgstr ""
+"Normal (automático) e Árvore (automático) são usados ​​para gerar suporte "
+"automaticamente. Se Normal (manual) ou Árvore (manual) for selecionado, "
+"apenas os reforçadores de suporte serão gerados"
 
 msgid "Normal (auto)"
-msgstr ""
+msgstr "Normal (automático)"
 
 msgid "Tree (auto)"
-msgstr ""
+msgstr "Árvore (automático)"
 
 msgid "Normal (manual)"
-msgstr ""
+msgstr "Normal (manual)"
 
 msgid "Tree (manual)"
-msgstr ""
+msgstr "Árvore (manual)"
 
 msgid "Support/object xy distance"
 msgstr "Distância xy entre suporte e objeto"
@@ -14652,7 +14692,7 @@ msgstr ""
 "espaçamento é ajustado automaticamente."
 
 msgid "Idle temperature"
-msgstr ""
+msgstr "Temperatura ociosa"
 
 msgid ""
 "Nozzle temperature when the tool is currently not used in multi-tool setups."

resources/profiles/BBL.json

@@ -1,7 +1,7 @@
 {
     "name": "Bambulab",
     "url": "http://www.bambulab.com/Parameters/vendor/BBL.json",
-    "version": "01.10.00.33",
+    "version": "01.10.00.34",
     "force_update": "0",
     "description": "the initial version of BBL configurations",
     "machine_model_list": [

resources/profiles/BBL/filament/AliZ/AliZ PETG @P1-X1.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFG99",
     "setting_id": "AliZPX1FSA04",
     "name": "AliZ PETG @P1-X1",
     "from": "system",

resources/profiles/Creality.json

@@ -398,6 +398,10 @@
             "name": "0.12mm Fine @Creality K1 (0.4 nozzle)",
             "sub_path": "process/0.12mm Fine @Creality K1 (0.4 nozzle).json"
         },
+        {
+            "name": "0.12mm Fine @Creality K1 SE",
+            "sub_path": "process/0.12mm Fine @Creality K1 SE 0.4 nozzle.json"
+        },
         {
             "name": "0.12mm Fine @Creality K1C",
             "sub_path": "process/0.12mm Fine @Creality K1C 0.4 nozzle.json"
@@ -582,6 +586,10 @@
             "name": "0.16mm Optimal @Creality K1 (0.4 nozzle)",
             "sub_path": "process/0.16mm Optimal @Creality K1 (0.4 nozzle).json"
         },
+        {
+            "name": "0.16mm Optimal @Creality K1 SE",
+            "sub_path": "process/0.16mm Optimal @Creality K1 SE 0.4 nozzle.json"
+        },
         {
             "name": "0.16mm Optimal @Creality K1C",
             "sub_path": "process/0.16mm Optimal @Creality K1C 0.4 nozzle.json"
@@ -795,8 +803,8 @@
             "sub_path": "process/0.40mm Standard @Creality K2 Plus 0.8 nozzle.json"
         },
         {
-            "name": "0.20mm Fast @Creality K1 SE 0.4",
-            "sub_path": "process/0.20mm Fast @Creality K1 SE 0.4.json"
+            "name": "0.20mm Standard @Creality K1 SE 0.4",
+            "sub_path": "process/0.20mm Standard @Creality K1 SE 0.4.json"
         },
         {
             "name": "0.20mm Standard @Creality Hi",
@@ -1094,6 +1102,10 @@
             "name": "0.24mm Draft @Creality K1 (0.4 nozzle)",
             "sub_path": "process/0.24mm Draft @Creality K1 (0.4 nozzle).json"
         },
+        {
+            "name": "0.24mm Draft @Creality K1 SE",
+            "sub_path": "process/0.24mm Draft @Creality K1 SE 0.4 nozzle.json"
+        },
         {
             "name": "0.24mm Draft @Creality K1C",
             "sub_path": "process/0.24mm Draft @Creality K1C 0.4 nozzle.json"

resources/profiles/Creality/machine/Creality K1 SE 0.4 nozzle.json

@@ -7,7 +7,7 @@
     "inherits": "fdm_creality_common",
     "printer_model": "Creality K1 SE",
     "gcode_flavor": "klipper",
-    "default_print_profile": "0.20mm Fast @Creality K1 SE 0.4",
+    "default_print_profile": "0.20mm Standard @Creality K1 SE 0.4",
     "nozzle_diameter": [
         "0.4"
     ],

resources/profiles/Creality/process/0.12mm Fine @Creality K1 SE 0.4 nozzle.json

@@ -0,0 +1,119 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.12mm Fine @Creality K1 SE",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K1 SE 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.12",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "300",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "500",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "100",
+    "ironing_type": "no ironing",
+    "layer_height": "0.12",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "60",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "10",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "300",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "5",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "precise_outer_wall": "1"
+}

resources/profiles/Creality/process/0.16mm Optimal @Creality K1 SE 0.4 nozzle.json

@@ -0,0 +1,119 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.16mm Optimal @Creality K1 SE",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K1 SE 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.16",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "300",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "500",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "100",
+    "ironing_type": "no ironing",
+    "layer_height": "0.16",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "60",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "10",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "300",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "precise_outer_wall": "1"
+}

resources/profiles/Creality/process/0.20mm Standard @Creality K1 SE 0.4.json

@@ -1,7 +1,8 @@
 {
     "type": "process",
     "setting_id": "GP004",
-    "name": "0.20mm Fast @Creality K1 SE 0.4",
+    "name": "0.20mm Standard @Creality K1 SE",
+    "renamed_from": "0.20mm Fast @Creality K1 SE 0.4",
     "from": "system",
     "inherits": "fdm_process_common_klipper",
     "instantiation": "true",
@@ -106,5 +107,6 @@
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",
     "xy_contour_compensation": "0",
-    "gcode_label_objects": "0"
+    "gcode_label_objects": "0",
+    "precise_outer_wall": "1"
 }

resources/profiles/Creality/process/0.24mm Draft @Creality K1 SE 0.4 nozzle.json

@@ -0,0 +1,119 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Draft @Creality K1 SE",
+    "from": "system",
+    "inherits": "fdm_process_common_klipper",
+    "instantiation": "true",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_flow": "1",
+    "bridge_speed": "50",
+    "internal_bridge_speed": "150%",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [
+        "Creality K1 SE 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "12000",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "outer_wall_acceleration": "5000",
+    "inner_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "300",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "500",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "100",
+    "ironing_type": "no ironing",
+    "layer_height": "0.24",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "300",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "1",
+    "seam_slope_inner_walls": "1",
+    "seam_slope_entire_loop": "1",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "300",
+    "spiral_mode": "0",
+    "initial_layer_infill_speed": "105",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "1",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_line_width": "0.42",
+    "top_surface_acceleration": "5000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.6",
+    "travel_acceleration": "12000",
+    "travel_speed": "500",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "gcode_label_objects": "0",
+    "precise_outer_wall": "1"
+}

resources/profiles/OrcaFilamentLibrary/filament/AliZ/AliZ PA-CF @base.json

@@ -1,6 +1,6 @@
 {
     "type": "filament",
-    "filament_id": "GFN98",
+    "filament_id": "AliZ003",
     "name": "AliZ PA-CF @base",
     "from": "system",
     "instantiation": "false",

resources/profiles/OrcaFilamentLibrary/filament/AliZ/AliZ PETG @System.json

@@ -1,6 +1,5 @@
 {
     "type": "filament",
-    "filament_id": "GFG99",
     "setting_id": "AliZGFSA04",
     "name": "AliZ PETG @System",
     "from": "system",

resources/profiles/OrcaFilamentLibrary/filament/AliZ/AliZ PETG @base.json

@@ -1,6 +1,6 @@
 {
     "type": "filament",
-    "filament_id": "GFG99",
+    "filament_id": "AliZ001",
     "name": "AliZ PETG @base",
     "from": "system",
     "instantiation": "false",

resources/profiles/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-CF @base.json

@@ -2,7 +2,7 @@
     "type": "filament",
     "name": "AliZ PETG-CF @base",
     "inherits": "AliZ PETG @base",
-    "filament_id": "GFG50",
+    "filament_id": "AliZ001-1",
     "from": "system",
     "instantiation": "false",
     "fan_cooling_layer_time": [

resources/profiles/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-Metal @base.json

@@ -2,6 +2,7 @@
     "type": "filament",
     "name": "AliZ PETG-Metal @base",
     "inherits": "AliZ PETG @base",
+    "filament_id": "AliZ001-2",
     "from": "system",
     "instantiation": "false",
     "fan_cooling_layer_time": [

resources/profiles/OrcaFilamentLibrary/filament/AliZ/AliZ PLA @base.json

@@ -2,6 +2,7 @@
     "type": "filament",
     "name": "AliZ PLA @base",
     "from": "system",
+    "filament_id": "AliZ002",
     "instantiation": "false",
     "inherits": "fdm_filament_pla",
     "enable_pressure_advance": [

resources/profiles/Prusa/process/process_common_mk4s.json

@@ -9,6 +9,7 @@
     "enable_overhang_speed": "1",
     "enable_prime_tower": "1",
     "enforce_support_layers": "0",
+    "exclude_object": "1",
     "filename_format": "{input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode",
     "from": "system",
     "gap_infill_speed": "120",

src/libslic3r/PrintConfig.cpp

@@ -465,9 +465,8 @@ void PrintConfigDef::init_common_params()
     ConfigOptionDef* def;
 
     def = this->add("printer_technology", coEnum);
-    //def->label = L("Printer technology");
-    def->label = "Printer technology";
-    //def->tooltip = L("Printer technology");
+    def->label = L("Printer technology");
+    def->tooltip = L("Printer technology");
     def->enum_keys_map = &ConfigOptionEnum<PrinterTechnology>::get_enum_values();
     def->enum_values.push_back("FFF");
     def->enum_values.push_back("SLA");
@@ -3111,10 +3110,8 @@ void PrintConfigDef::init_fff_params()
     def->set_default_value(new ConfigOptionFloat(100));
 
     def = this->add("inherits", coString);
-    //def->label = L("Inherits profile");
-    def->label = "Inherits profile";
-    //def->tooltip = L("Name of parent profile");
-    def->tooltip = "Name of parent profile";
+    def->label = L("Inherits profile");
+    def->tooltip = L("Name of parent profile");
     def->full_width = true;
     def->height = 5;
     def->set_default_value(new ConfigOptionString());
@@ -3128,7 +3125,6 @@ void PrintConfigDef::init_fff_params()
 
     def = this->add("interface_shells", coBool);
     def->label = L("Interface shells");
-    def->label = "Interface shells";
     def->tooltip = L("Force the generation of solid shells between adjacent materials/volumes. "
                   "Useful for multi-extruder prints with translucent materials or manual soluble "
                   "support material");
@@ -3817,8 +3813,6 @@ void PrintConfigDef::init_fff_params()
     def->set_default_value(new ConfigOptionStrings());
     
     def = this->add("printer_model", coString);
-    //def->label = L("Printer type");
-    //def->tooltip = L("Type of the printer");
     def->label = L("Printer type");
     def->tooltip = L("Type of the printer");
     def->set_default_value(new ConfigOptionString());
@@ -3834,7 +3828,6 @@ void PrintConfigDef::init_fff_params()
     def->set_default_value(new ConfigOptionString(""));
     
     def = this->add("printer_variant", coString);
-    //def->label = L("Printer variant");
     def->label = L("Printer variant");
     //def->tooltip = L("Name of the printer variant. For example, the printer variants may be differentiated by a nozzle diameter.");
     def->set_default_value(new ConfigOptionString());
@@ -4290,7 +4283,6 @@ void PrintConfigDef::init_fff_params()
 
     def = this->add("skirt_height", coInt);
     def->label = L("Skirt height");
-    //def->label = "Skirt height";
     def->tooltip = L("How many layers of skirt. Usually only one layer");
     def->sidetext = L("layers");
     def->mode = comSimple;
@@ -4430,7 +4422,7 @@ void PrintConfigDef::init_fff_params()
     def->set_default_value(new ConfigOptionFloatOrPercent(200, true));
 
     def = this->add("spiral_starting_flow_ratio", coFloat);
-    def->label = "Spiral starting flow ratio";
+    def->label = L("Spiral starting flow ratio");
     def->tooltip = L("Sets the starting flow ratio while transitioning from the last bottom layer to the spiral. "
                     "Normally the spiral transition scales the flow ratio from 0% to 100% during the first loop "
                     "which can in some cases lead to under extrusion at the start of the spiral.");
@@ -4440,7 +4432,7 @@ void PrintConfigDef::init_fff_params()
     def->mode = comAdvanced;
 
     def = this->add("spiral_finishing_flow_ratio", coFloat);
-    def->label = "Spiral finishing flow ratio";
+    def->label = L("Spiral finishing flow ratio");
     def->tooltip = L("Sets the finishing flow ratio while ending the spiral. "
                     "Normally the spiral transition scales the flow ratio from 100% to 0% during the last loop "
                     "which can in some cases lead to under extrusion at the end of the spiral.");
@@ -7214,20 +7206,20 @@ CLIActionsConfigDef::CLIActionsConfigDef()
     def->set_default_value(new ConfigOptionBool(false));*/
 
     def = this->add("export_3mf", coString);
-    def->label = "Export 3MF";
-    def->tooltip = "Export project as 3MF.";
+    def->label = L("Export 3MF");
+    def->tooltip = L("Export project as 3MF.");
     def->cli_params = "filename.3mf";
     def->set_default_value(new ConfigOptionString("output.3mf"));
 
     def = this->add("export_slicedata", coString);
-    def->label = "Export slicing data";
-    def->tooltip = "Export slicing data to a folder.";
+    def->label = L("Export slicing data");
+    def->tooltip = L("Export slicing data to a folder.");
     def->cli_params = "slicing_data_directory";
     def->set_default_value(new ConfigOptionString("cached_data"));
 
     def = this->add("load_slicedata", coStrings);
-    def->label = "Load slicing data";
-    def->tooltip = "Load cached slicing data from directory";
+    def->label = L("Load slicing data");
+    def->tooltip = L("Load cached slicing data from directory");
     def->cli_params = "slicing_data_directory";
     def->set_default_value(new ConfigOptionString("cached_data"));
 
@@ -7237,13 +7229,13 @@ CLIActionsConfigDef::CLIActionsConfigDef()
     def->set_default_value(new ConfigOptionBool(false));*/
 
     def = this->add("export_stl", coBool);
-    def->label = "Export STL";
-    def->tooltip = "Export the objects as single STL.";
+    def->label = L("Export STL");
+    def->tooltip = L("Export the objects as single STL.");
     def->set_default_value(new ConfigOptionBool(false));
 
     def = this->add("export_stls", coString);
-    def->label = "Export multiple STLs";
-    def->tooltip = "Export the objects as multiple STLs to directory";
+    def->label = L("Export multiple STLs");
+    def->tooltip = L("Export the objects as multiple STLs to directory");
     def->set_default_value(new ConfigOptionString("stl_path"));
 
     /*def = this->add("export_gcode", coBool);
@@ -7254,45 +7246,39 @@ CLIActionsConfigDef::CLIActionsConfigDef()
 
     /*def = this->add("gcodeviewer", coBool);
     // BBS: remove _L()
-    def->label = ("G-code viewer");
-    def->tooltip = ("Visualize an already sliced and saved G-code");
+    def->label = L("G-code viewer");
+    def->tooltip = L("Visualize an already sliced and saved G-code");
     def->cli = "gcodeviewer";
     def->set_default_value(new ConfigOptionBool(false));*/
 
     def = this->add("slice", coInt);
-    def->label = "Slice";
-    def->tooltip = "Slice the plates: 0-all plates, i-plate i, others-invalid";
+    def->label = L("Slice");
+    def->tooltip = L("Slice the plates: 0-all plates, i-plate i, others-invalid");
     def->cli = "slice";
     def->cli_params = "option";
     def->set_default_value(new ConfigOptionInt(0));
 
     def = this->add("help", coBool);
-    def->label = "Help";
-    def->tooltip = "Show command help.";
+    def->label = L("Help");
+    def->tooltip = L("Show command help.");
     def->cli = "help|h";
     def->set_default_value(new ConfigOptionBool(false));
 
     def = this->add("uptodate", coBool);
-    def->label = "UpToDate";
-    def->tooltip = "Update the configs values of 3mf to latest.";
+    def->label = L("UpToDate");
+    def->tooltip = L("Update the configs values of 3mf to latest.");
     def->cli = "uptodate";
     def->set_default_value(new ConfigOptionBool(false));
 
     def = this->add("downward_check", coStrings);
-    def->label = "downward machines check";
-    def->tooltip = "check whether current machine downward compatible with the machines in the list";
+    def->label = L("downward machines check");
+    def->tooltip = L("check whether current machine downward compatible with the machines in the list");
     def->cli_params = "\"machine1.json;machine2.json;...\"";
     def->set_default_value(new ConfigOptionStrings());
 
     def = this->add("load_defaultfila", coBool);
-    def->label = "Load default filaments";
-    def->tooltip = "Load first filament as default for those not loaded";
-    def->cli_params = "option";
-    def->set_default_value(new ConfigOptionBool(false));
-
-    def = this->add("min_save", coBool);
-    def->label = "Minimum save";
-    def->tooltip = "export 3mf with minimum size.";
+    def->label = L("Load default filaments");
+    def->tooltip = L("Load first filament as default for those not loaded");
     def->cli_params = "option";
     def->set_default_value(new ConfigOptionBool(false));
 
@@ -7303,15 +7289,15 @@ CLIActionsConfigDef::CLIActionsConfigDef()
     def->set_default_value(new ConfigOptionBool(false));
 
     def = this->add("mtcpp", coInt);
-    def->label = "mtcpp";
-    def->tooltip = "max triangle count per plate for slicing.";
+    def->label = L("mtcpp");
+    def->tooltip = L("max triangle count per plate for slicing.");
     def->cli = "mtcpp";
     def->cli_params = "count";
     def->set_default_value(new ConfigOptionInt(1000000));
 
     def = this->add("mstpp", coInt);
-    def->label = "mstpp";
-    def->tooltip = "max slicing time per plate in seconds.";
+    def->label = L("mstpp");
+    def->tooltip = L("max slicing time per plate in seconds.");
     def->cli = "mstpp";
     def->cli_params = "time";
     def->set_default_value(new ConfigOptionInt(300));
@@ -7323,8 +7309,8 @@ CLIActionsConfigDef::CLIActionsConfigDef()
     def->set_default_value(new ConfigOptionBool(false));
 
     def = this->add("normative_check", coBool);
-    def->label = "Normative check";
-    def->tooltip = "Check the normative items.";
+    def->label = L("Normative check");
+    def->tooltip = L("Check the normative items.");
     def->cli_params = "option";
     def->set_default_value(new ConfigOptionBool(true));
 
@@ -7339,19 +7325,19 @@ CLIActionsConfigDef::CLIActionsConfigDef()
     def->set_default_value(new ConfigOptionBool(false));*/
 
     def = this->add("info", coBool);
-    def->label = "Output Model Info";
-    def->tooltip = "Output the model's information.";
+    def->label = L("Output Model Info");
+    def->tooltip = L("Output the model's information.");
     def->set_default_value(new ConfigOptionBool(false));
 
     def = this->add("export_settings", coString);
-    def->label = "Export Settings";
-    def->tooltip = "Export settings to a file.";
+    def->label = L("Export Settings");
+    def->tooltip = L("Export settings to a file.");
     def->cli_params = "settings.json";
     def->set_default_value(new ConfigOptionString("output.json"));
 
     def = this->add("pipe", coString);
-    def->label = "Send progress to pipe";
-    def->tooltip = "Send progress to pipe.";
+    def->label = L("Send progress to pipe");
+    def->tooltip = L("Send progress to pipe.");
     def->cli_params = "pipename";
     def->set_default_value(new ConfigOptionString(""));
 }
@@ -7395,15 +7381,15 @@ CLITransformConfigDef::CLITransformConfigDef()
     def->set_default_value(new ConfigOptionPoint(Vec2d(100,100)));*/
 
     def = this->add("arrange", coInt);
-    def->label = "Arrange Options";
-    def->tooltip = "Arrange options: 0-disable, 1-enable, others-auto";
+    def->label = L("Arrange Options");
+    def->tooltip = L("Arrange options: 0-disable, 1-enable, others-auto");
     def->cli_params = "option";
     //def->cli = "arrange|a";
     def->set_default_value(new ConfigOptionInt(0));
 
     def = this->add("repetitions", coInt);
-    def->label = "Repetions count";
-    def->tooltip = "Repetions count of the whole model";
+    def->label = L("Repetions count");
+    def->tooltip = L("Repetions count of the whole model");
     def->cli_params = "count";
     def->set_default_value(new ConfigOptionInt(1));
 
@@ -7423,14 +7409,14 @@ CLITransformConfigDef::CLITransformConfigDef()
     def->tooltip = L("Multiply copies by creating a grid.");*/
 
     def = this->add("assemble", coBool);
-    def->label = "Assemble";
-    def->tooltip = "Arrange the supplied models in a plate and merge them in a single model in order to perform actions once.";
+    def->label = L("Assemble");
+    def->tooltip = L("Arrange the supplied models in a plate and merge them in a single model in order to perform actions once.");
     //def->cli = "merge|m";
     def->set_default_value(new ConfigOptionBool(false));
 
     def = this->add("convert_unit", coBool);
-    def->label = "Convert Unit";
-    def->tooltip = "Convert the units of model";
+    def->label = L("Convert Unit");
+    def->tooltip = L("Convert the units of model");
     def->set_default_value(new ConfigOptionBool(false));
 
     def = this->add("orient", coInt);
@@ -7460,8 +7446,8 @@ CLITransformConfigDef::CLITransformConfigDef()
     def->set_default_value(new ConfigOptionFloat(0));
 
     def = this->add("scale", coFloat);
-    def->label = "Scale";
-    def->tooltip = "Scale the model by a float factor";
+    def->label = L("Scale");
+    def->tooltip = L("Scale the model by a float factor");
     def->cli_params = "factor";
     def->set_default_value(new ConfigOptionFloat(1.f));
 
@@ -7502,55 +7488,55 @@ CLIMiscConfigDef::CLIMiscConfigDef()
     def->tooltip = L("Load configuration from the specified file. It can be used more than once to load options from multiple files.");*/
 
     def = this->add("load_settings", coStrings);
-    def->label = "Load General Settings";
-    def->tooltip = "Load process/machine settings from the specified file";
+    def->label = L("Load General Settings");
+    def->tooltip = L("Load process/machine settings from the specified file");
     def->cli_params = "\"setting1.json;setting2.json\"";
     def->set_default_value(new ConfigOptionStrings());
 
     def = this->add("load_filaments", coStrings);
-    def->label = "Load Filament Settings";
-    def->tooltip = "Load filament settings from the specified file list";
+    def->label = L("Load Filament Settings");
+    def->tooltip = L("Load filament settings from the specified file list");
     def->cli_params = "\"filament1.json;filament2.json;...\"";
     def->set_default_value(new ConfigOptionStrings());
 
     def = this->add("skip_objects", coInts);
-    def->label = "Skip Objects";
-    def->tooltip = "Skip some objects in this print";
+    def->label = L("Skip Objects");
+    def->tooltip = L("Skip some objects in this print");
     def->cli_params = "\"3,5,10,77\"";
     def->set_default_value(new ConfigOptionInts());
 
     def = this->add("clone_objects", coInts);
-    def->label = "Clone Objects";
-    def->tooltip = "Clone objects in the load list";
+    def->label = L("Clone Objects");
+    def->tooltip = L("Clone objects in the load list");
     def->cli_params = "\"1,3,1,10\"";
     def->set_default_value(new ConfigOptionInts());
 
     def = this->add("uptodate_settings", coStrings);
-    def->label = "load uptodate process/machine settings when using uptodate";
-    def->tooltip = "load uptodate process/machine settings from the specified file when using uptodate";
+    def->label = L("load uptodate process/machine settings when using uptodate");
+    def->tooltip = L("load uptodate process/machine settings from the specified file when using uptodate");
     def->cli_params = "\"setting1.json;setting2.json\"";
     def->set_default_value(new ConfigOptionStrings());
 
     def = this->add("uptodate_filaments", coStrings);
-    def->label = "load uptodate filament settings when using uptodate";
-    def->tooltip = "load uptodate filament settings from the specified file when using uptodate";
+    def->label = L("load uptodate filament settings when using uptodate");
+    def->tooltip = L("load uptodate filament settings from the specified file when using uptodate");
     def->cli_params = "\"filament1.json;filament2.json;...\"";
     def->set_default_value(new ConfigOptionStrings());
 
     def = this->add("downward_check", coBool);
-    def->label = "downward machines check";
-    def->tooltip = "if enabled, check whether current machine downward compatible with the machines in the list";
+    def->label = L("downward machines check");
+    def->tooltip = L("if enabled, check whether current machine downward compatible with the machines in the list");
     def->set_default_value(new ConfigOptionBool(false));
 
     def = this->add("downward_settings", coStrings);
-    def->label = "downward machines settings";
-    def->tooltip = "the machine settings list need to do downward checking";
+    def->label = L("downward machines settings");
+    def->tooltip = L("the machine settings list need to do downward checking");
     def->cli_params = "\"machine1.json;machine2.json;...\"";
     def->set_default_value(new ConfigOptionStrings());
     
     def = this->add("load_assemble_list", coString);
-    def->label = "Load assemble list";
-    def->tooltip = "Load assemble object list from config file";
+    def->label = L("Load assemble list");
+    def->tooltip = L("Load assemble object list from config file");
     def->cli_params = "assemble_list.json";
     def->set_default_value(new ConfigOptionString());
 
@@ -7577,21 +7563,21 @@ CLIMiscConfigDef::CLIMiscConfigDef()
 
 
     def = this->add("outputdir", coString);
-    def->label = "Output directory";
-    def->tooltip = "Output directory for the exported files.";
+    def->label = L("Output directory");
+    def->tooltip = L("Output directory for the exported files.");
     def->cli_params = "dir";
     def->set_default_value(new ConfigOptionString());
 
     def = this->add("debug", coInt);
-    def->label = "Debug level";
-    def->tooltip = "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:trace\n";
+    def->label = L("Debug level");
+    def->tooltip = L("Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:trace\n");
     def->min = 0;
     def->cli_params = "level";
     def->set_default_value(new ConfigOptionInt(1));
 
     def = this->add("enable_timelapse", coBool);
-    def->label = "Enable timeplapse for print";
-    def->tooltip = "If enabled, this slicing will be considered using timelapse";
+    def->label = L("Enable timeplapse for print");
+    def->tooltip = L("If enabled, this slicing will be considered using timelapse");
     def->set_default_value(new ConfigOptionBool(false));
 
 #if (defined(_MSC_VER) || defined(__MINGW32__)) && defined(SLIC3R_GUI)
@@ -7608,59 +7594,59 @@ CLIMiscConfigDef::CLIMiscConfigDef()
     def->set_default_value(new ConfigOptionString());
 
     def = this->add("load_filament_ids", coInts);
-    def->label = "Load filament ids";
-    def->tooltip = "Load filament ids for each object";
+    def->label = L("Load filament ids");
+    def->tooltip = L("Load filament ids for each object");
     def->cli_params = "\"1,2,3,1\"";
     def->set_default_value(new ConfigOptionInts());
 
     def = this->add("allow_multicolor_oneplate", coBool);
-    def->label = "Allow multiple color on one plate";
-    def->tooltip = "If enabled, the arrange will allow multiple color on one plate";
+    def->label = L("Allow multiple color on one plate");
+    def->tooltip = L("If enabled, the arrange will allow multiple color on one plate");
     def->set_default_value(new ConfigOptionBool(true));
 
     def = this->add("allow_rotations", coBool);
-    def->label = "Allow rotatations when arrange";
-    def->tooltip = "If enabled, the arrange will allow rotations when place object";
+    def->label = L("Allow rotatations when arrange");
+    def->tooltip = L("If enabled, the arrange will allow rotations when place object");
     def->set_default_value(new ConfigOptionBool(true));
 
     def = this->add("avoid_extrusion_cali_region", coBool);
-    def->label = "Avoid extrusion calibrate region when doing arrange";
-    def->tooltip = "If enabled, the arrange will avoid extrusion calibrate region when place object";
+    def->label = L("Avoid extrusion calibrate region when doing arrange");
+    def->tooltip = L("If enabled, the arrange will avoid extrusion calibrate region when place object");
     def->set_default_value(new ConfigOptionBool(false));
 
     def = this->add("skip_modified_gcodes", coBool);
-    def->label = "Skip modified gcodes in 3mf";
-    def->tooltip = "Skip the modified gcodes in 3mf from Printer or filament Presets";
+    def->label = L("Skip modified gcodes in 3mf");
+    def->tooltip = L("Skip the modified gcodes in 3mf from Printer or filament Presets");
     def->cli_params = "option";
     def->set_default_value(new ConfigOptionBool(false));
 
     def = this->add("makerlab_name", coString);
-    def->label = "MakerLab name";
-    def->tooltip = "MakerLab name to generate this 3mf";
+    def->label = L("MakerLab name");
+    def->tooltip = L("MakerLab name to generate this 3mf");
     def->cli_params = "name";
     def->set_default_value(new ConfigOptionString());
 
     def = this->add("makerlab_version", coString);
-    def->label = "MakerLab version";
-    def->tooltip = "MakerLab version to generate this 3mf";
+    def->label = L("MakerLab version");
+    def->tooltip = L("MakerLab version to generate this 3mf");
     def->cli_params = "version";
     def->set_default_value(new ConfigOptionString());
 
     def = this->add("metadata_name", coStrings);
-    def->label = "metadata name list";
-    def->tooltip = "matadata name list added into 3mf";
+    def->label = L("metadata name list");
+    def->tooltip = L("metadata name list added into 3mf");
     def->cli_params = "\"name1;name2;...\"";
     def->set_default_value(new ConfigOptionStrings());
 
     def = this->add("metadata_value", coStrings);
-    def->label = "metadata value list";
-    def->tooltip = "matadata value list added into 3mf";
+    def->label = L("metadata value list");
+    def->tooltip = L("metadata value list added into 3mf");
     def->cli_params = "\"value1;value2;...\"";
     def->set_default_value(new ConfigOptionStrings());
 
     def = this->add("allow_newer_file", coBool);
-    def->label = "Allow 3mf with newer version to be sliced";
-    def->tooltip = "Allow 3mf with newer version to be sliced";
+    def->label = L("Allow 3mf with newer version to be sliced");
+    def->tooltip = L("Allow 3mf with newer version to be sliced");
     def->cli_params = "option";
     def->set_default_value(new  ConfigOptionBool(false));
 }

version.inc

@@ -10,7 +10,7 @@ endif()
 if(NOT DEFINED BBL_INTERNAL_TESTING)
 set(BBL_INTERNAL_TESTING "0")
 endif()
-set(SoftFever_VERSION "2.3.0-beta")
+set(SoftFever_VERSION "2.3.0-beta2")
 string(REGEX MATCH "^([0-9]+)\\.([0-9]+)\\.([0-9]+)"
        SoftFever_VERSION_MATCH ${SoftFever_VERSION})
 set(ORCA_VERSION_MAJOR ${CMAKE_MATCH_1})