Change-Id: I6a3b2a67d2950e2c1c5267bb7c65d5594924caec
Signed-off-by: Stone Li <stone.li@bambulab.com>
(cherry picked from commit 176e505bcf5f48971302d9aff14e74b118eeafbe)
fix the text errot of density of PolyTerra
z_hop_type change to auto
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I7f59d2620b42d2f2092ebb4c01ac3a5455c40a4f
1 extrude move to dustbin
2 max vol of TPU 95A of X1 to 3.6
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I0b9d2a1db9c57c58255f95aad8a77772317a3ec9
1. display factor of extrusion calibration
2. add progress to calibration extrusion
3. support ext spool
Change-Id: Ic124a0097f16e6287c09f5f133eea84eeefb4000
Signed-off-by: Stone Li <stone.li@bambulab.com>
Start gcode of P1P is wrong.
This is for github issue #1044
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Id078b7c9020ef773373c3486f74dc51385b9dcc0
1. add gcode command for void printing detection
2. fix the issue that the toolhead is not at excess chute position when
smooth timelapse ends, by adding 2s pause after M991 command.
Jira: STUDIO-1996
Change-Id: I40cf16116e742744cea9bd90969e556a9ea2b2f1
(cherry picked from commit 2fbf7ffe6b1bd8850a76e229ff91750c689721b9)
auto select grid infill for tree hybrid, and set default wall count to
1.
Change-Id: Icbecd540d06f353da2e63533f8f7cf7d7f20fbdb
(cherry picked from commit 246335cc195c88a4101dddd1eeda42d9ca16589f)
1. change base pattern "None" to "Hollow", and add an icon image
2. fix a bug of not initializing m_highest_overhang_layer
3. fix a bug where normal(auto) with Tree* styles won't generate any
supports.
4. add popup message when selecting support material for interface.
5. draw connected loops when wall count is larger than 1
Change-Id: I7ea211d2971b25c65724bb10d0f6cf6e0b68c6a1
(cherry picked from commit 4c1ae7f937239fc3e1397ec2cb3b290d886bb0f0)
1. In auto arranging bed temp can be higher than vitrify temp by no more than 15 degrees.
2. In by-object printing we use max radius for clearance
3. Add P1P max radius
Change-Id: If595f3e19fd74f6f36d2f394edbb835c413cc800
(cherry picked from commit 2af42420ad3770f0728adb583082600544519a58)
1. Add a new style "Tree Slim". If enabled, tree
support branches are merged more aggressively, and the support volume
is minimized.
2. Enable support style, add back Snug for normal support.
3. Remove hybrid(auto) type and use "Tree Hybrid" style to represent it.
4. Fix a bug in plan_layer_heights that may generate empty layers when
layer height is set to 0.3mm.
5. Fix a bug where no raft is generated if there is no overhang.
6. Fix the bug where no bottom interface or bottom gap is generated when
tree slim is selected.
7. Use physical distance to calc radius
Change-Id: Iacd57018ae5496cdc9acd28551c44d1c88c53fe0
Change infill density from 20% to 15% to reduce warp risk for large
objects.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I48d616b2f07ee93784d12c7d84b83fdb451e5cc1
1. replace lightning infill with gyroid infill
2. lower top surface speed to 150mm/s
3. scale up and move logo text
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: Id65f21c04ba602cb7afe38ac3de27b7720c4ade3
1. update Merry Christmas board
2. update the model name
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I2757c67dbf12152da707b73ad2a18083ac8a2f00
Bambu pa-cf has been modified, generic pa-cf
should be changed as well
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ie859b41bd4d138a5fab204d6ad6a79806c3f0a9b
1. undef SUPPORT_TREE_DEBUG_TO_SVG
2. change default tree branch angle to 45 degrees
3. encourage tree neighbors merge faster
4. draw more loops at the top of trees for stronger support
Change-Id: I2edf6a2dddb3b6165c2519ee15e9a7ffaba9de94
(cherry picked from commit 3a9723b2e88a033b3298cd68daf9400265e984a1)
1 Use 25% infill density. 60% is too high and useless
2 update filament change gcode
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9a1fbbfb56b61723aa6e9d6bc44a22f467d92562
1. add default support base pattern (lightning for tree support,
rectilinear for normal)
2. change default support interface pattern to "Default" (concentric for
absoluble material, rectilinear for others)
3. delete tree_support_with_infill, replace no-infill optio with "None" infill type
4. delete HAS_LIGHTNING_INFILL macro (lightning is impossible to be
removed now)
5. fix the issue that tree support base may grow above interface by
adding virtual nodes (distance_to_top<0).
Change-Id: I5affa44e1f72d0dc54052927f2b315de83702870
(cherry picked from commit a2b41b1dfd9227e68ac6d971312133ec3382baa7)
Open the "Support xy expansion distance" setting for users who can set
expanding and shrinking distance along xy to change normal supports' overhang area.
Jira: STUDIO-1297
Change-Id: If3a1efe99acaced12216966a6f8abd0dc3734757
(cherry picked from commit c1fd588a181b17403109b64a0019818f428252da)
Users can set distance between support bottom contacts and object
once enable normal/tree support.
Jira: STUDIO-1383
TODO：Func seems good though, some details (e.g., bottom_interface
detection) need to be optimized furthur. Will keep follow-up.
Change-Id: I85815e7aa6cf1a5d0249633cd8ab995873461e8a
(cherry picked from commit eab39e89c94d749ebe6266ab745cbb70a068277d)
1. change tray id like to A1, B1, C1, D1
2. can change the name of the project that is sent
3. add ams mapping instructions
Change-Id: If301f4051f640157a53d6927a0ddf2facf4961b4
Add loop inside sparse infill of lower layer
to provide archor for internal bridge.
This option controls how many lower layers generate
loop path.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ifdb6db9090115732aa2cacf5d155b587a10e18fc
(cherry picked from commit 4fdb87ecd5c2e680f6bad2d018ba39cd05f787ce)
Generic PLA silk should use lower filament
volumetroc and retraction
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I8ba11094afc0274710e97d50554001d3a0a4caa1
Jerk handling has been changed in printer.
Changed in slicer as well.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ic3aef43a534a7f0b85b734e747dc3ca883faaa46
For PA-cf material, forcing cooling for all outer
wall and using lower fan speed for infill and inner
wall can get more high strength.
Add this cooling strategy.
When set overhang fan threshold to be 0%, then bridge
and all outer wall will be force to cool with
the overhang fan speed.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ideed1ac8690f1eeb68aad760678db76bb4dae8ec
This patch can make sure that the cooling fan will not
be enabled during change fimanet.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9f480b99116d62fe7522233b69b5bca209663821
As title. And also not make printing time increased
too much.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I79f578227c5d81e76d8dd9254c43a3cb90109132
hrc determine which filament could be printed by the nozzle
if the filament required hrc smaller than the nozzle hrc
the fillament could be printed
either of it be zero means use other printers
or user want to print it anyway
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ic32dfaed4f9c80774a670c362de612254f3a5ed0
1. remove wireframe in 3d view, only keep in paint;
2. pass barycentric_coordinates from outside
3. add shortcut hints
Change-Id: I911e5cdf3475926d9527dc0839fdce072ed54746
(cherry picked from commit 6e16d0ccfb71741e55daabd757be9f9e7613e695)
So we can set lower acceleration for outer wall now.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib4728bf16f6c540afca62f423c8aab4c9e0c4d02
Change-Id: I48f34039635803c3f1cee4cc2c853a0ffa5b451a
Signed-off-by: Stone Li <stone.li@bambulab.com>
(cherry picked from commit 387ba2a5aac05d3b3af0923f88415188ae8cb44e)
Signed-off-by: Stone Li <stone.li@bambulab.com>
Towline may be even lower than the upper rod. Let's
take away 10mm tolerance.
Change-Id: I13972fc4ecb0671e1af4b2c6d102e319417e532f
(cherry picked from commit cedcb862556c8c9014a91ef2aad8f39fc118d925)
1. use strict ordering to ensure the printing order is right
2. reduce height-to-lid to 100mm considering towline is lower than lid
and may collid with objects
TODO: printing brim may still collide, need to subtract inflated boundary of
others during brim generation
Change-Id: Icf0cba10c579d28fabd97764c1b3abec267ebd9b
(cherry picked from commit 46c6f5ff94488b2f4481bf1d34555f4a7c45e135)
1. Previous logic can't guarantee left-to-right printing order, so
toolhead may crash on the right side. In the new algorithm printing
order is guaranteed.
2. Clearance radius should be the max of 3 directions (left, bottom,
up), not including right, otherwise collision may happen on bottom or
up directions.
3. Add is_extrusion_cali_object property to handle extrusion brim
overlap better.
Change-Id: I44868b9925d983f5cca0c31d35dfa28d895fadbf
