* Additional control over bridges
* Label updates
* Detect and handle layers over external bridges
* Label updates
* To-Do placeholders
* Filter out small external bridges
* Apply safety offset for internal bridge polygon intersections
* code comments
* Increase bridge offsets to 3 perimeters total (1.5 perimeter in each dimension)
* Filter out bridges based on perimeter counts to focus bridge on areas where bridge infill is actually generated in the end.
* Fixing bugs
* Convert tick boxes to drop down menu
* Additional geometry checks for second internal bridge to ensure no small polygons are left over.
* Minor code refactor for clarity
* Further refinements in polygon logic
* Polygon logic refinements pt3
* Further union operations to ensure clean geometry
* Fix compile error
* Clean up constructors
* Only create bridges on stInternalSolid areas, not sparse infill.
* Refactor internal second bridge logic to stand alone parallel for loop to avoid thread deadlocks
* Revert change to only consider stInternalSolid areas for second internal bridge layer.
This resulted in partly unsupported solid infill areas above as the remainder was too narrow to generate sparse infill
* Updated beta statements and tooltip changes
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Add support for perlin noise fuzzy skin
* Support multiple types of coherent noise
* Updated tooltips for more clarity.
* Reorder options as suggested by @discip
* Fix accidental removal of &
* Move libnoise to deps
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
During the printer connection cycle, each Filament and slot is only judged once
When deleting custom filaments or modifying the temperature of custom filaments, re evaluate
Jira: XXXX
Change-Id: If495a343efdb1be6f46d11dd20f6ec7934266e87
(cherry picked from commit e5dab1487188d744c732568232b32666e5f2cc5c)
Compare the custom gcode z to `0.5*(layer_z[n] + layer_z[n+1])` instead of `EPSILON`
to compensate float rounding error during gcode processing (SoftFever/OrcaSlicer#7834)
* Make sure the `m_extrusion_quality_estimator.set_current_object()` is called after regional config has been applied (SoftFever/OrcaSlicer#7946)
* Init `m_extrusion_quality_estimator` based on region config
* Revert "Make sure the `m_extrusion_quality_estimator.set_current_object()` is called after regional config has been applied (SoftFever/OrcaSlicer#7946)"
This reverts commit d13d4a47b78b6f80cdc4bff935ea8c3c52ff556b.
* Call `m_extrusion_quality_estimator.set_current_object` regardless, because that doesn't hurt
* Add a comment
* Revert "SPE-1950: Optimization of computation complexity of perimeter ordering for Arachne generator."
This reverts commit 47ec9b9b06.
* Revert "SPE-1963: Improve ordering of perimeters with Arachne perimeter generator"
This reverts commit babb84c70a.
Fix issue that the contact layer is printed in wrong filament when interface layer number is set to 0
Cherry-picked from prusa3d/PrusaSlicer@ca5f6da08d
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
Some portions of GCode (like BTT_TFT thumbnails) has to be CRLF in
order to work correctly. However, gcode post processor was ignoring
input line endings style emitting '\n' (LF) into post-processed output.
* Update OrcaSlicer.pot
Made sentence a bit clearer.
* Update PrintConfig.cpp
Made sentence a bit clearer.
* Update OrcaSlicer.pot
corrected previous expression
* Update PrintConfig.cpp
corrected previous expression
