* POC - Do not slow down external perimeters to meet minimum layer time
* POC - Do not slow down external perimeters to meet minimum layer time - rework
* Revert "POC - Do not slow down external perimeters to meet minimum layer time"
This reverts commit d84ff93f901c6773c246926f6fd34f22e14b7131.
* Dont slow down external perimeters to meet layer time target v2
* Reverted previous implementation
* UI fixes for dont slow down for layer cooling
* Update dont slow down outer walls naming convention
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Change G-Code
* Change config to closely match prusa profile
The profile can be found at https://forum.prusa3d.com/forum/prusaslicer/looking-for-a-dremel-3d45-profile-for-prusa-slicer-help-me-help-my-students/
* Use original build plate model
* Change printable area
* Update machine settings
* Change bed model naming
* Prevent future conflicts
* Update values
* Fix error
* Disable firmware retraction
* Enable reduce infill retraction
* Fully disable relative e distances
* Fix filename format
* Revert "Fix filename format"
This reverts commit b95e76a57a1fcf796a658bcbf616ed77d79298d1.
* Forgot this one
* Clean up
* Update OrcaSlicer_es.po
* some changes
* Some fixes
* More fixes
* More fixes and improves
* More fixes
* Update OrcaSlicer_es.po
* Update OrcaSlicer_es.po
Cambiado punto por coma
* Update Spanish Language
* Updated strings
* Update OrcaSlicer_es.po
* Update OrcaSlicer_es.po
* Fixed Spanish Strings in English
Fixed a lot of string whose are translations were english to english.
* added Prusa Mini with Input Shaper to profiles
* refactoring to more reusable settings
* added more processes, changed settings
* Update 0.15mm Speed @MINIIS.json
* Update 0.10mm Speed @MINIIS.json
* changed to cubic because of speed
* further changes after reviewing prusa slicer settings
* simplified machine settings
* retraction speeds according to prusa slicer
* changed max flow according to prusa slicer
* after clearification at the prusaslicer repository M900 got removed
* precise wall per default
* enable reverse overhang on odd by default
* added settings from prusa slicer
* changed cooling setings
* changed default to inner-outer-inner wall
inner-outer-inner gives pretty good overhangs with better surface
* new profiles for bigger nozzles, changed some cooling settings according to prusaslicer
* profiles for different nozzles sizes, better speed settings
* initial layer height was wrong
* wrong initial layer height
* set the correct accelerations
* changed firmware version number
* using pressure advance UI setting instead of custom filament g-code
* Update Prusa Generic PC.json
* Update Prusa Generic PC.json
* changed max flow for PC
* added PVA filament profiles
* bug fix in filament loading
* changed line width according to prusa slicer
* changed heatbed temperature for Minis capabilities
* set default support to snug
* changed default filament setting to the correct value
* changed line with to the correct values according to prusaslicer profiles
* Update Prusa MINIIS 0.4 nozzle.json
updated firmware version
* updated firmware version
* changed first layer height according to optimal value of the respective nozzle size
* changed wall loops to 2 for bigger nozzles
