* Adaptive Pressure advance options setup
* Dynamic PA - PCHIP interpolator code and tests
* Integrate dynamic PA with slicing code - emit new PA values per speed change
* Link adaptive PA to role change instead of speed change
* Adaptive PA - Alpha 2
Reduce the frequency of requested PA changes by introducing a "state" variable.
Implement user toggle for adapting PA for external walls for overhangs
* Hide adaptive PA for overhangs
* Convert Adaptive PA to use volumetric flow model and start preparing for converting to Gcode post processor
* Converted Dynamic PA to a post processing filter. Reverted changes in GCode cpp and created tagging mechanism to allow filter to apply PA changes.
* Removed adaptive PA for overhangs
* Foundations for two dimensional adaptive PA based on acceleration and volumetric flow speed
* Minor code cleanup and updating of tooltips
* Renaming files for better clarity and generate classes documentation
* Update src/libslic3r/PrintConfig.cpp
Co-authored-by: ElectricalBoy <15651807+ElectricalBoy@users.noreply.github.com>
* Update src/libslic3r/PrintConfig.cpp
Co-authored-by: ElectricalBoy <15651807+ElectricalBoy@users.noreply.github.com>
* Update src/libslic3r/PrintConfig.cpp
Co-authored-by: ElectricalBoy <15651807+ElectricalBoy@users.noreply.github.com>
* Introduce average mm3_mm over the length of a multipath for adaptive PA
* Updates for multipath handling part 2
* Introduce average mm3_mm over the length of a multipath for adaptive PA
* Trigger PA evaluation more frequently to catch edge cases where speed changes across islands of the same feature type.
* Updates for multipath handling part 2
* Adaptive PA: Implement average flow estimation on loops
* Code formatting
* Fix adaptive PA not adapting for small disconnected external wall line segments.
* Updated to take max print speed of upcoming feature to calculate new PA value.
This is to resolve issue of incorrect PA value used when starting a new feature at an overhang.
* Code clean up
* Performance tuning
* Further performance tuning by reducing use of regex commands in the nested loops and fix bug preventing gcode line output
* Further performance tuning and tweaks to stop searching for max speed after the first travel move.
* Reduce debug information
* Updated debug info
* Fix an issue on seams on specific models when wipe before external perimeter was enabled. Also cleanup documentation and add new to-do's
* Prepare for adaptive PA for overhangs, fix wipe bug & clean up code and comments
* Initial commit for adapting PA when extruding fully overhanging perimeters
* Ignore wipe command when identifying current print speed
* Option to evaluate adaptive PA on overhang regions in preparation for Klipper experimental option testing
* Update to issue PA changes for varying flow conditions within the same feature
* Fix bug where adaptive PA was enabled erroneously for role changes and ignoring user's preference.
* Refactored some code
* More refactoring
* Some bug fixes and enabled comments only when verbose g-code is enabled
* Introduced dedicated PA option for bridges
* Code refactoring to optimise initialisation of PA processor (making it faster). Fix a bug where PA was not always set after a toolchange. Improve general error handling and robustness.
* Updates to adaptive PA tooltips
* Bridging PA check with Epsilon instead of 0.
* Adaptive PA: addressing comments
---------
Co-authored-by: ElectricalBoy <15651807+ElectricalBoy@users.noreply.github.com>
* FIX: do not touch the plate with different printing sequence
jira: STUDIO-5424
Change-Id: I8ad00fa991b753de126a5bef0d320c452033e2e7
(cherry picked from commit c4adfe16e285f238f2c5cd8938b2167fdfb6b1b0)
* FIX: global arrange setting is wrong
global arrange setting is wrong if a plate's setting is changed from object list
jira: STUDIO-5438
Change-Id: Iaa7f35837edbacff9b97ca17a8ab34c8e6bb023d
(cherry picked from commit fa2f56575b2e4305e35dd59ff55e0881720de025)
* FIX: temperature symbols not shown correctly
Need to use wxString::FromUTF8 to convert unicode symbols to wxString.
jira: none
Change-Id: Ia8b559d437c956a2cc28916d8963823356402d05
* FIX:Repair calculation process of plate_box
Jira: STUDIO-5520
Change-Id: I4c3f9597542ad2dfec4d7849e75fa28272fa4ea3
* FIX:frequent calls to _update_imgui_select_plate_toolbar
Jira: STUDIO-5488
Change-Id: I12e6f37c2fe94de004aa6da43421970d6df10f0f
* FIX: & is not displayed on the sending print page
Jira: STUDIO-5343
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I1736bb97433581ff117bfe09afe8ee70c1b08fc4
* FIX: file name is not fully displayed if it is too long
Jira: STUDIO-5230
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I992fa0c0575afbd2eecb2af02c8a305eda028f7f
(cherry picked from commit d0d7fb0b1394429ee9d28d8ef4060a286ba0112d)
* FIX: The warning box still exits when the temperature has reset.
Jira: STUDIO-5562
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I7532db69880449eb3fa0a14fc4dfc61e7f6d518e
(cherry picked from commit 589ed5fe045b5e7ec3effe437c9685085960c0fc)
* FIX: White circle is not clear on auto refill page
Jira: STUDIO-3262
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I05ac6257638063d32a9943c09bb7c14cc9229b3a
* FIX: Groove text ctrl is not wide engough
Jira: STUDIO-5434
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I93c0995473a72b5c19bc413c38c090906e360455
(cherry picked from commit e4a8b0ef5e62ba0053dc782c30ea79b237a46ac3)
* FIX: values are not saved when clicking on an empty space
Jira: STUDIO-4637
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I837050029635f673b3ae671ea1ad049aaf4fdd16
* FIX: Temperature warning is not fully displayed
Jira: STUDIO-5038
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I460cbe2a5d0a092c4257b7bd5192058bf2e4707b
* NEW: display bitmap when calibrating
Jira: STUDIO-4661
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I60cf4f9769feca74699012418880e93fcfe34432
(cherry picked from commit 1213aea816694405311dc0c1061655a4c2a1d067)
* FIX: remember the flow ratio calibration type
Jira: STUDIO-5181
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: Id6125d1d4ea58972ce55c2c2498259596b25111e
(cherry picked from commit 1af1038fd4824d989e992cb630cf34e00c787af7)
* FIX: File panel crash on scroll
Change-Id: I56833a376fa52c960efea5fbd60003367ba410c2
Jira: STUDIO-5337, STUDIO-5513
* FIX: auto arranging skip unprintable high items
Jira: STUDIO-5646
Change-Id: I72dc3d8c71a075bab8204f4418e869a7a34c0c8e
(cherry picked from commit 0afdf8361493485da2254c426719594fd9a982ed)
* FIX: MediaFilePanel error state
Change-Id: I318ef59fb97478ffee16dff594022b2b9029964a
Jira: STUDIO-5638
* FIX: sync whole preset vendor directory
Change-Id: I191dbe979a87ff35d38cab1149b7975664344838
Jira: STUDIO-5534
* ENH: support turn off liveview auto retry
Change-Id: I24b39f74e0a40a13277d6eae3830c95c5c9de333
Jira: none
(cherry picked from commit f6ceb3fb8e4df3f876c50a1c4ba96b4a1be60190)
* FIX: SwitchButton auto scale font
Change-Id: If4004c0963cc8bb2f41e8e71c304d5239bf252ab
Jira: STUDIO-4969 STUDIO-4921
* FIX: set WEBKIT_DISABLE_COMPOSITING_MODE=1 for linux gtk
Change-Id: I8a500585ca815948bab1210578ba5c45858ed78e
Jira: STUDIO-5199
* FIX: Prefer old selection when sync AMS not compatible
Change-Id: I6b18db51887132a997cf78d70fff9a92e23bc44a
Jira: STUDIO-5416
* ENH: show liveview stat
Change-Id: I70d1f458aa2ed379ad7fe07dee76fbe035316420
Jira: none
* NEW:remember custom color
Jira: STUDIO-5635
Change-Id: I439080f6a8ddb6fde3899cffbabc3b6e66afbd96
* FIX: copy live555 dll
Change-Id: Idf727b8e26107e93aa9934299e87dc71531d1c63
Jira: STUDIO-4480
* FIX: optimize batch update object list on macOS
Change-Id: I92e24cc53c0b3bf0658d15abc64292f0e17c0a82
Jira: STUDIO-5440 STUDIO-5515
* FIX: network plugins tip disappear on dark mode
Change-Id: I422ab63f71158a49920438f01dd9c39774c27744
Jira: STUDIO-4891
* FIX: Display inconsistence in parameter table
JIra: STUDIO-3716
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I986473bcbb3efff4abd9c5917926d9e888a4f28c
* FIX: Incomplete copy display in Transfer or discard dialog
Jira: 5569 5549
Change-Id: I757b636259d7e1a222b9fc09276c12235360fd57
* FIX: Limit the max length of k when calibrating
Jira: STUDIO-4291
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: Ie7cff086cf2a3c744213525d5d83f9ac4b55333d
* fix build break
* FIX: delete sdcard file crash
Change-Id: I814fd4b557fa92ac4060cbeb18a53f5616e49662
Jira: STUDIO-5977
* FIX: Yield when join media thread
Change-Id: I746d7df88a0de8363da7d9507cb63c9e0ffe970a
Jira: STUDIO-5952
* FIX: Guide page can't show in screen with mainframe
Jira: STUDIO-4911
Change-Id: I7e89614e0f1585263456c847a1b38dcfd0ad59e6
* FIX: filament combox has blank line
Change-Id: Ia39ddb564b3c9cc943d0ea4c0cf7cc4d24bef799
* FIX: load 3mf crash when studio has no base filament
Jira: none
Change-Id: I4387f425f60e6a53a53cf68addb1ab2d6f8f8901
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* FIX:add resume button
JIRA2860
Change-Id: I39035d929876ab3c84c5f5c3494376967300938c
* FIX: CLI: fix an arrange issue when duplicate failed
restore the wipe_tower position to original when duplicate fail
JIRA: MAK-2638
Change-Id: I355056f1d87648cc1f6aafa15a98ff569359b44f
* FIX: fix printer list without nozzle such as 0.35 or 0.75
Jira: 5409
Change-Id: I1a258fd10bcc03e297b791256880f2518d602905
* ENH:The first object should locate at plate center
Jira: STUDIO-6023
Change-Id: If4284136fe63ca576463445f3ab16b6e18ead30f
* FIX: Colored filament is not matched against.
github: #2190
Colored filament is not matched against the same color in AMS slot.
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: Id4588fc9c8115a46881e2f5d198d79fe831f4371
* FIX: Revert "[STUDIO-4284] not set max height of liveview window"
This reverts commit 0312aee4d9b92e23884be8802da9801ff3b9fe93.
Reason for revert: STUDIO-5653
Jira: STUDIO-5653
Change-Id: If9d5f3e63968a0a54f9af1a2dae8f95f7f1f3f80
* ENH:modify file name rules when export stl
Jira: STUDIO-6091
Change-Id: Ic27e4e341cc09099e98a5eab7dfd48416f2922ae
* FIX: Flow calibration stage incorrect when switching printers
Jira: 6093
Change-Id: I41f1ac10ac9422ac808eab3254f32ea14a0d3b76
* FIX: UserGuide Can not Click When Computer User name has chinese
JIRA: None
Change-Id: If50baa8c6a13eb501918fd5cdaf0ea3da7c788ef
(cherry picked from commit 4e5ccc9f2de5ac429af6541c6a8bd412848801d0)
* ENH: Little Optimize JS Code Execute Progress
JIRA: STUDIO-5792
Change-Id: I12b03d8b968a9dd8dfce9eb3ef925fa8768e2046
(cherry picked from commit 2bf861092c9e306e1311eda8ac36fd981e73b6c2)
* FIX: Delete Test Code
JIRA: NONE
Change-Id: I838a348edb22e09d2b1d5c41600c6fade535d184
(cherry picked from commit 51e664da0209ae8a3de5cbf30a72505c0b5bd028)
* FIX: the object list order changed after clone
github: 2798
Change-Id: I10a05ee7e00b05cb1255cfb708876ed784cabac7
* ENH: add alias for custom Filament preset
Jira: XXXX
Change-Id: I2fecc8b2bdb63618155e3d21f9db374a6119e416
* FIX: [5779] fix show alias logic when load preset
Jira: 5779
Change-Id: I4fefe3c1ffbca9bd8296f1b3fdd5de48c6a36a28
* ENH: Optimize the logic for deleting third-party printers
Mark the Filament and Process presets to be deleted first
then delete the child presets first and then the parent presets.
Jira: none
Change-Id: I100b873baae96c6ba27af258e708e6ab8e6ee4ab
* ENH:default selection of virtual tray
jira:[for def selected]
Change-Id: I0661f179f8e4bcac33ae12fbbeaeaf95c5b7c110
* ENH:add protection when no thumbnail data
jira:[for protection]
Change-Id: I3834a5ffde11ff54567dd854271184f06f94547f
* FIX:fixed issue with chinese path
jira:[Fixed the issue of failed loading of configuration files under Chinese path]
Change-Id: I9badd8fc158fcf49f46411ac4e5f72d58823eeb2
* NEW:add new msg notification for hms
jira:[STUDIO-6154]
Change-Id: If1aa33030a99550d0c859d594a2711aea4dcea4a
* NEW:using new humidity display ui
jira:[STUDIO-5967]
Change-Id: I13be4212e6b97f646d21e0af64cbc5006753fdeb
* NEW:Dye materials above grade 10 with shortcut keys
JIRA:STUDIO-5827
Change-Id: I002ecdd19167fb36772e4b4e9e2f7760e21079db
* NEW:update automatically when inserting materials
JIRA: STUDIO-6157
Change-Id: I2cefbb7b330ca4f13e841066548992b3fb3740f1
* FIX: check sdcard exists for file connect
Change-Id: I69199a29294c04d1fe46ee66682085b1f1d1d049
Jira: none
* FIX: not load printer files when it's busy
Change-Id: Ie5a58befcfc0d7fa0d4e587e8429c0b1bfeff72a
Jira: STUDIO-6105
* ENH: save video ctrl size to reduce layout change
Change-Id: I470f29d7f029d304c9badeeb8f94bed281080b29
Jira: STUDIO-6141
* ENH: stop liveview track record
Change-Id: Id4f236b239740bd919f2aa2f2892c1e63ce233bd
Jira: STUDIO-6131
* FIX: thread safe of http extra headers
Change-Id: I6ffa424be7ccb6abd78a66cc8be535f038b05469
Jira: none
* optimize MeshBoolean
* FIX: parse printer_model_id from 3mf
Change-Id: Ib149c986885ee6412898f1f51dd5a4aaad0a596d
Jira: none
* ENH: find grid empty cells for fill bed if the item is too small
jira: STUDIO-6015
Change-Id: I4e5eafdadd77482a27a8903d32bb83325283088d
(cherry picked from commit 8df4da4a863cdc42c790a9d5da37f8633423e406)
* ENH: always return product for firmware and lifycycle
JIRA: STUDIO-6282
Change-Id: I1f942babdcb7afee2c9a9076ac539063c5406ad7
Signed-off-by: Stone Li <stone.li@bambulab.com>
* ENH:STL tracking restricted area
jira:[STUDIO-6155]
Change-Id: I289c8b8aa8f62f0e5cc7004fb60437aa3337ca85
* NEW:add nozzle settings
jira:[STUDIO-6226]
Change-Id: I0db8333e5b5c8195add111fdcfa2e92387997815
* ENH:display the current humidity of AMS
jira:[ENH]
Change-Id: I98bdd6d70cd173ed640f0d96692fcb6836416bb8
* FIX: [6123] create printer for exist printer can not into next page
Jira: 6123
Change-Id: I338ac0fde4f69b6f312f20e53851d91339e8156f
* ENH: Display value of flushing volumes
JIRA:STUDIO-6139
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I273fb22b0d378a839c34e9e0e9c414f0e5134799
* FIX: show printer file path & title
Change-Id: Ie5eff188c3039deeca5da96b54407194bf8910a0
Jira: STUDIO-6268
* FIX: liveview error message
Change-Id: Ie437e07916d7b6feae2dbcfa166c4e73bdcf31a1
Jira: STUDIO-6107
* FIX: file proto error message
Change-Id: I2c4117961c615e424780fb3830441e6a93c50bcc
Jira: none
* ENH: earse sensitive fields when export configs
Jira: None
Change-Id: Id9ca0637240b80773f39d2308192f8c78a5de3c6
* fix build errors
* FIX: unexpected layers in multi color print
github: 3131
Change-Id: I2a42e3bbd2247fbc0957022e1baae43c9375a8fb
* ENH: Add "New" button for PA cali
Jira: XXXX
Change-Id: Ic39f2508f2f9d390c2b9246fb3d3e281cde9b064
* NEW:add printer compatible check from sd card view
jira:[STUDIO-5969]
Change-Id: I86d10ebe2e9bc77e6350e26aeed6b4f0f9fdcecb
* NEW:enable loadl/unload when printing pause
jira:[STUDIO-5968]
Change-Id: Ieb3ef2423378e44b81a61a2b18c16f68aa335922
* FIX:fixed HMS message not cleared
jira:[STUDIO-6296]
Change-Id: Ic7692ce337fd00ece4ab8d65214a8c406f8543f8
* ENH:error code setting default value
jira:[for error code]
Change-Id: Ica61344c8217d41adb2947a40f633dc8d19a197a
* ENH:display conflict information
jira:[STUDIO-6297]
Change-Id: Ie1501323a7e8d9ceb4060ae6c0b4eab20f8b088a
* ENH: refresh printer file list
Change-Id: Ic86942d2b0b2e8383ef0f06311164aad59e837ad
Github: 3383
* FIX: Unnecessary prime tower error prompts
Custom gcode on other plate causes unnecessary prime tower error prompts
Jira: 6305
Change-Id: If499659b364a6b6898db1587b7b2aeed03758667
* FIX:multi colour displayed as gradient color on AMS
JIRA:5925
Change-Id: Ic7a925dda2e3bde066ba40ba27002569040f9518
* NEW:Color painting shortcut keys 10~16
JIRA:STUDIO-6238
Change-Id: I3cce838fad5e73d41f109b32f2e563716fd5b0da
* ENH: Print when unnamed project, task named as object names
github: #2286
Change-Id: I9be3fd25d16a00b78326ec43db9afcf3645d90f1
* ENH:reset user access code
jira:[for lan mode]
Change-Id: I2d0ed48411d683c3f20b2febc0d54747287870a7
* FIX:fixed crash when selecting new printer
jira:[fix]
Change-Id: I6a81186e822eb6bf6ce7aa70561dfae35d4de0e7
* FIX: not show printer's camera error when updating
Jira: STUDIO-6232
Change-Id: I985d75b3772849e07100799c4f13db5d4cbafde3
* FIX: clear error after reload file list ok
Change-Id: I5d5e4f2870302b198d3a9d40603a6fa8010b7e76
Jira: STUDIO-6306
* ENH: custom filament sync with printer
1. prompt sync user presets when create custom filament
2. Fix the issue of not displaying printers when creating custom Filaments based on presets when selecting PLA Aero Type.
3. Optimizing the traversal logic during AMS Setting Pop up reduces time complexity and allows for quick pop ups. Additionally, using nozzle calibers for retrieval and repairing custom materials may result in inaccurate retrieval.
4. Implement synchronization logic with the printer
-a. Received slot information, reset the slot when the "filament_id" in the information does not exist in Studio
-b. Received slot information, the nozzle temperature in the information is different from the preset nozzle temperature in Studio, reset the current temperature.
Jira: none
Change-Id: I511dc82563ec77a341839671d398607048ce1985
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* NEW: add api of "toggle_selected_volume_visibility"
Jira: STUDIO-6166
Change-Id: I77eb988a3ea43cd37d50888d1753b973795d8b36
* FIX: No data in the drop-down menu of the AMS settings page
Jira: 6342 6343
Change-Id: I6938fb4a7ae2816a4675d8d739622e25f219f469
* fix build error
* FIX: label wrap all & ping test for liveview
Change-Id: I7767ed0740e20bb578b6ef9f5e9873c8c79d172a
Jira: STUDIO-5821
* ENH: reuse controls in param Field
Change-Id: I42bb4da01e1e9b64c343b7fda4357a9553cf8684
Jira: STUDIO-5983
* FIX: use wide path to create camera process
Change-Id: I5de31fce0dea14df9a0ad363f3cb16dc40c275bc
Jira: STUDIO-4946
* ENH: optimize the get_tool_order func
Use Dp to refine performance
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I38b0c875e4deee9d9fbe926087fb5b2e274f8f90
(cherry picked from commit 9b7b66dc7a1f5e3efa318227ae7694bec5ec1216)
* Fix build errors
* ENH: add customize other layers print sequence
Jira: 6338
Change-Id: Ic14b2671ade37ab37583b81c5b509447b6c0d8f8
* ENH: [#3236] Unsaved changes to interface copy adjustment
github: #3236
Change-Id: I53931859bdcdfedfa9f63f6239d0fd2fd6d2766c
* NEW: support to adjust other layers print sequence
Jira: 6338
Change-Id: I5e6aef71aa9e6e97c1859aaaeb9ada5f1340414a
* FIX: imgui support toolbar window text wrapping issue
jira: STUDIO-5821
Change-Id: I57ee984baffbb2f00a7ecc5d5c8061074b06aff6
* FIX: updater: fix force upgrade logic
JIRA: STUDIO-6393
Change-Id: I46c51e09e7390e5ab0de40215911aac9635ab476
(cherry picked from commit 673ba6ff4ebda039d71dcbfdaa28c1252f5b8821)
* FIX:final step of slicing is to execute post-processing script
JIRA: STUDIO-5828
Change-Id: I8c33e2a66ac5c692244c778586040663b7b54bd7
* NEW:enable 3dMouse detect in .conf
JIRA: 5830
Change-Id: I8731e0244d2f551130c84bcfbbb46967ae6b19cd
* FIX:finish init "return" icon and hide it
Jira: STUDIO-6350
Change-Id: I0f1efd4a64ea204daeac7de822602ef6dfa3e4a5
* FIX: seq_print: fix an invalid warning caused by sinking
github: https://github.com/bambulab/BambuStudio/issues/3007
Change-Id: I1111910f2c625d5a871ea01b37dbfa7b04a849ee
(cherry picked from commit a3db95bb0940d5afe07ef0bb07113cc2acd7cd0a)
* ENH: plater: optimize the loading time of 3mf with large objects
JIRA: STUDIO-6021
Change-Id: Ia97f681041bb553c5c4b5b1d9109e5e5c42daf6b
* FIX:Fixed HMS issue
jira:[STUDIO-6344 STUDIO-6310 STUDIO-6356 STUDIO-6348]
Change-Id: I9d6660e7c349775004b69bfe41b651bfa8b359b7
* ENH:handling dirty data after nozzle settings
jira:[STUDIO-6332]
Change-Id: I00d6d1324376f973ec3cf9f2154ae83ef3302705
* ENH: use Bambu_StartStreamEx for agora tunnel
Change-Id: I5c28dea49d267bf7ff967d0982dd83555899c8c4
Jira: none
* FIX: use safe language code for http
Change-Id: Id1f4927308350ee35b891a5352cbf1e2d0c2577e
Github: 3655
* FIX: add cli_id, cli_ver to bambu url
Change-Id: Ic527d1497c6dee0c723d7b4629f0be825a8f7545
Jira: none
* FIX: not throw when _add_auxiliary_dir_to_archive
Change-Id: Idf54bbbd0ef557ec5e1a8e51ed669a1eb1fb4261
Jira: STUDIO-6339
* NEW: vase mode can be applied to one plate
jira: STUDIO-5838
Change-Id: Ifb315f7d79b570aeb7ee31d3495b4d465e3af0c6
* fix crashes
* ENH: update overhang degree method on calssic mode
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I90f6e4c2ef618fdaef00bdaf1ca309893f484c1e
* FIX: auto-arranging unprintable items may crash
github: #3676
Change-Id: I68eb87c73ad2c0c269f60e661136fd1a72ee5e2f
(cherry picked from commit 7e3c57eaa811424935fe8db6a4e77dd142ee2b58)
* FIX: use old slicer_uuid for client_id
Change-Id: I6c45e83213d613fc28eef04115f9cfb19dea703e
Jira: none
* ci: update network module based on commit 542ced8
Change-Id: I3ad5032cc56a99d1c3a687b2891d147b13af066d
* NEW:Support OLTP file
Jira: STUDIO-6421
Change-Id: I58bc94e978e6d2dd136ea370fb01f6ec80e14b23
* ENH: detect in_head_wrap_zone more precisly
1.Union first layer convex hull with object's bbox to detect whether
model enter head_wrap_detect_zone
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I11f26967d7421f41e9c824e62794c96591e6ae71
* FIX: fix the plate cannot be searched
JIRA: STUDIO-6283
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I88206c91ea24c6a41a0bd06f05f0f3c2fdc58a36
* NEW:hms error code
JIRA: STUDIO-6302
Change-Id: Ia33511f4c636c8ada39ed5a4e52d9b185da9c00b
* FIX:Color adaptation for numpad
JIRA:STUDIO-6410
Change-Id: If6e49638af8616fd349367073883592e6bebb503
* FIX: error overhang degree mapping
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ifa24aa0cad0a06b09ee62a8be8781188a765d1d0
* FIX:display correct humidity
jira:[fix]
Change-Id: I27aae54a8355911b5d88ed45be320d3c9178081c
* ENH:Hide confirmation button when unable to send print
jira:[STUDIO-6355, STUDIO-6332]
Change-Id: I8f9c0edea4d5ee70e9fef1e9d42838d598dc32c4
* NEW: new type for Custom Filament
Type: "PE", "PP", "EVA", "PHA", "BVOH", "PE-CF", "PP-CF", "PP-GF"
Github: 3205 3169 3127
Change-Id: I8a30dd806c35460d9dae0f808190ce013b125d51
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* FIX:fixed filament settings page display error in French
jira:[STUDIO-5821]
Change-Id: I6cc6dd9b83c7570688c2adc55efe2407cbcb4390
* FIX:fixed thumbnail not updating when using multiple plates
jira:[STUDIO-6313]
Change-Id: If49daa5b38b9a580ae226ff00a1e0085d167c15c
* FIX: Color Bleed in slicer
github: 3681 jira: 6450
Change-Id: Icb6274f7ddb238c238c133b95167310b1af905f7
* ci: update network module based on commit 8befd46
Change-Id: I3a6420684f106bdde5897a50d27dfec69e0aa37f
* ci: update network module based on commit e411785
Change-Id: I3a9c7bfa5ac5a942f339ad0194a24d9170847371
* FIX:reload paint after background process apply
Jira: STUDIO-6493
Change-Id: I9a1986152f05163f236f58bb24210b690ca3d562
* FIX: use object name of plate when send task in untitled project
Jira: 6430
Change-Id: I78ec811fab1cf028c0d5f81ac7738abdbeb6145f
* FIX: auto arranging spacing can't be adjusted correctly
jira: none
Change-Id: Ibddfe85aab9f3fad6a1612e8db437e52c40e20a3
(cherry picked from commit 136bca01f45e62042bd699a9a0a9f6d13519712c)
* FIX: fix change nozzle temp in Studio but printer not change
Jira: 6510
Change-Id: Ia0e1ac586ff41ddbabdac0845415e70774299387
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* ENH:rename some img files
jira:[STUDIO-6512]
Change-Id: I69872533cccda37b94384bc219cc35c5dec9310b
* ENH:PEI bed is no longer unchecked by default
jira:[STUDIO-6508]
Change-Id: Ic9ca99860d46c27ca4c36a735df3f57fe71417df
* FIX:fix the load status of vtray
jira:[STUDIO-6435]
Change-Id: I8cafcc0b6caf19492aae6c153fb509f470dc7e83
* FIX: Supports automatic calibration of textured PEI
jira: 6504
Change-Id: I3234fb555b9bf0ea97e73387651874733e761ee7
* ENH:add tooltip for search item
JIRA: STUDIO-6459
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I7602a32159d21de8f37ea0208dd6a9f59b90dcce
* ENH: CLI: add version check logic
add option allow_newer_file
Change-Id: I8e8e4a45f77ebdd6dae6189841e4a9952e95ca82
* ci: update build version to 01.09.00.52
Change-Id: Id6e32b5afcf5eaabce9c0c7ab2c422e97b00e632
* NEW: switch to object panel if double click on object
jira: none
switch to object panel if double click on object,
otherwise switch to global panel if double click on background.
Change-Id: I6e54d7957aa19f1ebb1f993bc38125bbee8a1c98
(cherry picked from commit cc2e07bc9489c76a7d767acff0406c83c996504c)
* FIX:fixed loading img resource failure
jira:[for fix img load]
Change-Id: Ifb26b2ca23029abeda000322bf2ef7d2b3cda3b4
* FIX: Project Title can Click
JIRA: none
Change-Id: I614c60e76efe04875e36e3a8ef7a10acd3ef9ecf
* FIX:Prioritize selecting filament with smaller serial numbers in AMS
JIRA: 5909
Change-Id: If3030d4dd8d59af36bc1ae1801be1b89b0027a71
* NEW:material adaptation in select machine dialog
JIRA:xxxx
Change-Id: I625eac75c88cad804dd3741f750c5ea68a975421
* FIX:mac ams setting display
JIRA: STUDIO-6228\6409
Change-Id: I432a3aa96601a8e223b5949bc0ad5234c1374dca
* FIX: Image Scale Mode and Online Display
JIRA: none
Change-Id: I528f16e93b82748d86dc93e2dd3d85f317babaa7
* FIX: sequential_print_clearance_valid not working
not working correctly with short objects
jira: STUDIO-6489
Change-Id: I33e1a165f448e1c3e272d4045934c63ad345db2f
(cherry picked from commit 9348eaa22a056db5384a38ea966cec9ba4a533a7)
* NEW: add nozzle_height to machine profile and do not detect conflict
Jira: request from 1.9
1. add nozzle_height to machine profile
2. auto arranging and sequential_print_clearance_valid don't consider objects conflicting if they are all shorter than nozzle_height and close.
3. do not detect conflict when all models are short.
Change-Id: I8d1eebb15d5bfa8c40d7491e033149e360531b89
(cherry picked from commit 6b4b52653db5f08d724a556c5c766c0bfa00f34d)
* FIX: sequential_print_clearance_valid not working
not working correctly with short objects
jira: STUDIO-6489
Change-Id: I33e1a165f448e1c3e272d4045934c63ad345db2f
(cherry picked from commit 9348eaa22a056db5384a38ea966cec9ba4a533a7)
* FIX: [6510] set nozzle temp incorrectly when popup AMS Setting
Change-Id: I898f0b94794a3d67017b1917ce196c4019f5eb4a
* FIX: auto-calculate flushing volumes
JIRA: STUDIO-6547
FIX the first modification of consumable color after synchronizing filaments, without automatically calculating the flushing volumes
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I2bc76a29afde5241d100cc42a5161db0f9b901c4
* FIX: custom layer sequence from End to End comboBox display issue
jira: new
Change-Id: I413cd5896d7e921f2c7c03b91b08788fefb9a4f3
* FIX:fix the v tray's filament unload logic
jira:[STUDIO-6627]
Change-Id: I34420bc4d1d27b6b36defb9852bba2eaf77fdcf2
* NEW:reducing purge through retracting filament
1.reducing purge through retracting filament.Currently only
applicable to X&P series
github: PR#3100
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ie328039872e50e699dc5e5082fa99f68ac5f5fd1
* FIX: wrong role cache in wipe tower
1. Add wipe tower role cache in GCodeProcessor result
2. Add wiki link for prime tower
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia766c7218df68fb1ffba567af193d6bfecacf588
* Fix plate settng icon
* NEW:revert hms error code
Change-Id: Ib5cc8bb8b8ced0f70d5bbe4751a1f97258218c6f
* FIX: calibration page button broken display issue
jira: STUDIO-3913
Change-Id: I2fd488e829d898b7d81d09db814ed6518f0c54a8
* FIX: do not check spiral vase mode config if an object is loaded
jira: STUDIO-6514
Change-Id: Ib44ec8322ff178b5765f7fe94b588aa38339691d
* FIX: implicitly set spiral vase config for objects just loading
jira: 6514
Change-Id: I04bb2b1abeb62d4dfff4e526b723b1cf1bd5fd7f
* FIX: filling bed fails if the bed is already full
JIRA: STUDIO-6490
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I71b5a01a95cdffef7c0750e6347fa8911dcd781d
* ci: update network module based on commit 868f5d7
Change-Id: I5584e4441e1f2ab400addaa87ee8013927fb9e15
* FIX: add query_real_volume_idx_from_other_view api
Jira: STUDIO-6545
Change-Id: Ib8216981c5d2945a0221a5caa1fbc14ed74e930b
* FIX: Can't edit text
github: 3750
Change-Id: I1caecaa968e60cadcdbe9f7aa67cba141bb88230
* FIX: Slicer creates invalid color pattern
github: 3749
Change-Id: I3fd74a9ca59b75873fcbca4437e4858c749ee853
* ENH: hide tuck did
Change-Id: I9021d3f51c9a73bc9208b479f96b1ddbe7a2f8f8
Jira: none
* FIX: PrinterFileSystem: retry connect on user action
Change-Id: I3e8902298385ed2e5906fd15d1817b6e33522a76
Jira: STUDIO-6354
* FIX: Remove user ID and other information
Jira: XXXX
Change-Id: Ia63ec88a335d88fd40a29952abe6d40d8991efee
* ENH: refine retraction before cut
1. Add filament retraction before cut control
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ifcb087c9791c0461b793ef811b21ebd4c007d880
* FIX: enable resumed read only Field
Change-Id: Id09e671932458699c020f0a061d8cfc11a6958ab
Jira: STUDIO-6641
* ENH: add precise_z_height
jira: none
Change-Id: Idb9fcf0063e773f1531a49961478460b91ded10f
* ENH: modify the multi-material segmentation and voronoi
This patch is cherry pick from Prusa, thanks to Prusa
Rework multi-material segmentation to work directly on the Voronoi diagram without creating a copy of it.
Previous algorithms assume that they can get an invalid Voronoi diagram. Because of that, during the multi-material segmentation, a copy of the Voronoi diagram was created, and there were several attempts to fix missing vertices and edges. But as it shows, this wasn't a good enough approach and sometimes led to several issues like bleeding layers.
After generalization, our approach for detection and repairs of invalid Voronoi diagrams from Arachne, we could assume that multi-material segmentation gets non-invalid Voronoi diagrams.
With this assumption, we reimplement multi-materials segmentation to work directly on the Voronoi diagram. That should make multi-material segmentation more stable.
So, this should fix several issues like bleeding layers. Also, memory consumption should decrease by a lot. Also, there should be some speedup of multi-materials segmentation.
Jira: none
Change-Id: I72aa6e1f9634d9ee8759aa469a0b39a36ace62f5
* FIX: infill speed not work on region level
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ie3d17c5e3cbf91a8854e3b4cd80babeb2b1bd121
* ENH: support saving PA calibration results for P series
Jira: none
Change-Id: I9402b8bcce7b48a63d0e97e0708080701d065e7a
* ENH: refine long retraction ui
1. associate button display logic
2. Add valid range tip
3. seperate the printer into three types
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie14c8746eb20456dacd5c129a5449c1e7c7db372
* FIX:height range cut = volume_count * 2
Jira: none
Change-Id: I539c2f9cda7985b4b3c318ca8aa1eb7c52fdce82
* FIX: auto arranging gets wrong object height
obj->bounding_box().size() is not the real object size if the object has been rotated.
jira: STUDIO-5999
Change-Id: I6553d4c990696efd674e3e57063802127d5d5282
(cherry picked from commit 479ea9fb02f55d24f27c94633f3d852bd5c62c83)
* ENH: seperate support weight from model
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I86bb34941269bf1aa29436a94ebbdff675497e85
* ENH: add support for gcodeviewer statistics
jira: new
Change-Id: Ied6d61e8c48ac82daf16579d9caed9723cf8e29d
* FIX: invalid support weight per extruder
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I0e4b857c9c758ab7c54ef13aee1bf596f975640b
* FIX: do not need reset bed_type for pa calibration
jira: none
Change-Id: I411064cf14d94a9bd1f0f6668ee23aa10d372f3d
* FIX: P1P/S can not modify the k value in old version
jira: 6745
Change-Id: I5c9dffe8e998213e6af6e1d01a6b0ae82521e8db
* Add rotation support for 3D Honeycomb
Ported from BS
* ENH: add default params for long retraction
1. Only auto calculate flush when enabled
2. Add default params for long retraction
3. Disable filament override for unsupport machines
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib5d51505b58101839527e944f9a237483951f9fe
* misc fixes
* ENH: remove long retraction warning
jira:NEW
Signed-off-by: tao wang <tao.wang@bambulab.com>
Change-Id: If60236b3282991a2d94df7d125427cff86899536
* avoid zero length path
* FIX: check recommended nozzle temperature
Jira: XXXX
Change-Id: I4dbb274cf27ef9c6d20a8479b29af1069652b2bc
* FIX: fix not popping up a prompt when the temperature is set to 0
Jira: 6497
Change-Id: I6498fc6962e7da376d4c652dab0a99a161932eef
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* ENH: When creating a custom Filament, use the system Filament type.
Jira: 6301
Change-Id: I1bfddcf43d2ebaebca4eb494d1f64165c3d59e9e
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* FIX: seam and unretarct pos error on smooth vase
casused by invalid path of smooth vase mode
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ib597e8c05760886aae2c42e42e8d46e82b844578
* FIX: unable to map if filament not used in model
1.Fix filament can not map if it's not used in model body
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ibd2685ffd198b2e17dbf44289d0144b5b7c25788
* NEW:Update data only on device pages
jira:[STUDIO-6776]
Change-Id: I33b0c9f35c1dc6df2db3b6bd4f446f46b31ecf6c
* set(SLIC3R_VERSION "01.09.00.70")
* update BBL machine profile 01.09.00.04
* scarf clip start and end
Ported from BambuStudio
* fix linux build error
---------
Co-authored-by: Arthur <arthur.tang@bambulab.com>
Co-authored-by: zhou.xu <zhou.xu@bambulab.com>
Co-authored-by: wenjie.guo <wenjie.guo@bambulab.com>
Co-authored-by: chunmao.guo <chunmao.guo@bambulab.com>
Co-authored-by: maosheng.wei <maosheng.wei@bambulab.com>
Co-authored-by: hu.wang <hu.wang@bambulab.com>
Co-authored-by: lane.wei <lane.wei@bambulab.com>
Co-authored-by: Kunlong Ma <kunlong.ma@bambulab.com>
Co-authored-by: zhimin.zeng <zhimin.zeng@bambulab.com>
Co-authored-by: zorro.zhang <zorro.zhang@bambulab.com>
Co-authored-by: tao wang <tao.wang@bambulab.com>
Co-authored-by: Stone Li <stone.li@bambulab.com>
Co-authored-by: xun.zhang <xun.zhang@bambulab.com>
Co-authored-by: liz.li <liz.li@bambulab.com>
Co-authored-by: qing.zhang <qing.zhang@bambulab.com>
Co-authored-by: gerrit <gerrit@bambulab.com>
Co-authored-by: Leon Fisher-Skipper <47602359+LeonFisherSkipper@users.noreply.github.com>
Co-authored-by: Lukas Matena <lukasmatena@seznam.cz>
Co-authored-by: jianjia.ma <jianjia.ma@bambulab.com>
* Remember z of previous layer
* Support travel to middle of the layer z
* Support sloped extrusion
* Implement sloped seam
* Reduce extra movements
* Don't clip loop if sloped seam is enabled
* Fix wipe
* Ensure `slope_max_segment_length`
* Add options
* Limit slope length to perimeter length
* Fix slope segmentation
* Rename the option to scarf joint seam
* Don't modify the slope option when turning on spiral vase
* Add a few suggestions when turnning on scarf joint
* Add option to add scarf joint to inner walls
* Apply seam gap at the end of the slope
* Add option to explicitly use the entire loop as scarf length
* Fix layer number
* Increase default scarf length to 20mm
* Better way of storing the global scarf state
* Better vase mode layer height recognition
* Move id should exclude seams
* Fix slope height with independent support layer height
* Fix linux build
* Allow controlling the scarf with modifier
* Scarf start height default to 0
* Allow enable scarf seam on contour only
* Fix type error
* Move the creation of sloped loop into ExtrusionEntity.cpp
* Fix error "vector too long"
* Detect seams properly
* The correct way of calculating the rate limit
* The correct way of calculating the rate limit
(cherry picked from commit 05961f7c98803a42871b8df855bfff6a102936c4)
* Add pressure equalizer in print by object mode
* Remove the settings recommendation as it varies a lot depends on printer & filament
* Add a beta suffix
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* [FEATURE] Experimental small area flow compensation
This is a native implementation of the [Small Area Flow Compensation](https://github.com/Alexander-T-Moss/Small-Area-Flow-Comp)
post-processor by Alexander Þór for OrcaSlicer.
Quite often small areas of solid infill appear to be over-extruded, despite
the rest of a print looking like it has a well-dialled-in EM/Flow. Currently,
there isn't a good understanding of why this happens, so this is an attempt
at a brute-force approach to treat the symptom.
This feature modifies the flow of extrusion lines inversely proportional to
the length of the extrusion line (the shorter the extrusion, the less flow
it should have).
Alexander Þór: Author of the original script implementation
Weaslus: Proof Reader, Hypeman & pestered folks into making this
* [TASK] Whitespace cleanup
* [TASK] Add credits, format code, improve input labels
* [TASK] Use multi-line textbox as input for flow model
* [TASK] Toggle flow compensation per object
* [TASK] Enable flow compensation for first layer
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* #3603 - fix "Wipe before external loop" causing blobs on single wall perimeters
* Updated parameters to pass by const reference to avoid re-creation of object
Dialog now shows all issues within the same dialog
If a custom gcode value is not specified within the config, a testing value is added. This ensures that (most) of the custom gcode is parsed, and thus checked against the definitions.
Orca: Added option to use CMake config option ORCA_CHECK_GCODE_PLACEHOLDERS to check custom gcode placeholders rather than using debug
Original Commit: prusa3d/PrusaSlicer@b8bb7f2
Co-authored-by: YuSanka <yusanka@gmail.com>
Included pre-generated files specific to Orca rather than PS provided files
Original Commit: prusa3d/PrusaSlicer@55d5921
Co-authored-by: YuSanka <yusanka@gmail.com>
* Wipe retraction adjusted based on available wipe distance and retraction speed
* Wipe Improvements: Removed debug code, removed retract before wipe and made the respect retract speed an option.
* Wipe improvements: Spelling & grammar
* Revert "Wipe improvements: Spelling & grammar"
This reverts commit c8f8612b3f3755945584f69fad43b94d767e07ae.
* Revert "Wipe Improvements: Removed debug code, removed retract before wipe and made the respect retract speed an option."
This reverts commit ba515ffb628d193484c860d8f142fce66be1b985.
* Wipe improvements: Using retraction before wipe parameter to judge when to do excess retraction
* Wipe Improvements: Floating point comparison check
* Wipe Improvements: Refactoring the code
* Wipe Improvements: Updated Wipe Distance tool tip
* Wipe Improvements: Removed redundant code
* Wipe Improvements: Use unscale_
* ENH: Show Recent File Image Keep Scale
Change-Id: Ib8a6cf916eaee8e353bf858bc4f2ea503705809e
* FIX: wipetower position problem
jira: STUDIO-4914
Change-Id: I7b05d3c53931ed8ce3d4603ff21ee6ef675611e5
* FIX: dailytips adapts screen scale
jira: STUDIO-5019 STUDIO-5026 STUDIO-5027 STUDIO-5028 STUDIO-5025
Change-Id: I63d3af1870218ba8e0f048a6ef03fb29fabe27cb
* FIX: generate process preset based on template
Jira: XXXX
Change-Id: I50adf0790dc239307d236a4cebece860ef6beb16
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* FIX: object list plate name edit
Change-Id: I61d3dcd7d9598d759a3a0b44cc77d2af2adca25a
Jira: STUDIO-4937
* ENH:no longer checking nozzle type
jira:[for nozzle type check]
Change-Id: I0e88445a264f21b0c11519e9a22a165d05611d14
* ENH: improve first layer tree support
First layer support can't be top interface, and
min brim width of auto mode should be larger
than 0.
Jira: STUDIO-5010
Change-Id: I02f8b017b535f8a47965387e8679f692b1966e04
(cherry picked from commit 3e7d54abe352e8ab5f9d6492b5a86a96f9067f94)
* ENH: version: bumped to 1.8
JIRA: no jira
Change-Id: I50903098b59f1dd9a6b6cf7656cec7d388f3ff17
* ENH:try again after subscription failure
jira:[Try again after subscription failure]
Change-Id: Ibfb1e8e26eb166d786a372632a86ef98030db034
* ENH:display msg dialog once
jira:[for http error msg]
Change-Id: I12e9c155fdb567cac99c35b6feeef650269ba75d
* ENH:remove config.json file
Change-Id: Idfcf3a63fefe968e88153c26fb691fd05cd83dc4
* ENH:add protection in threads
jira:[for random crash]
Change-Id: I6286012dd77abccba461f7cd72a6fc531a84c95f
* FIX: add protection for get_model_task_thread thread
Jira: XXXX
Change-Id: I3cbc17d181a0e13c658f31eaeb6a4df878e6df41
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* FIX: delete all compatible presets when delete third printer
Jira: XXXX
Change-Id: I1a294402627e7ab7a8c6701f20679b3d04aff059
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* ci: update build version to 01.08.00.51
Change-Id: I20a01adacbdb5fe69c106b9efd029f7308136e10
* ENH: default open support_interface_not_for_body
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I48e084deb18633f9ec47a8ec4ec643163bf66318
* ENH:modified text with too low version
jira:[for low version]
Change-Id: I862a0defda976a35f326a8805e002330f2ed7fdf
* NEW:update printer config file version
Change-Id: I9a46b29b03beb67a3da0b8f76d8b5c4b3c482928
* FIX:The plane should rotate around the world coordinate system
Jira: STUDIO-5054
Change-Id: I16e484b38d79cabd9473acf1abf3c5c6b0adc4c6
* ENH:translate for limit file size and so on
Jira: STUDIO-5007
Change-Id: I2c279eb690841aa51cd8128f8028266cbc17e977
* ENH:use on_render_rotate_gizmos() replace GLGizmoRotate3D::on_render()
Jira: STUDIO-4227
Change-Id: If9b9ea5596e59472d5fa87ac56aeb7f6ecc65643
* FIX: some mistakes in filament profiles
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ibe7f3650f2d9cf47561dd5f2ec591a5f6c553503
* FIX: fix shard_ptr is null
Change-Id: I0187cf64ffbb08a2265a11900b5c865e9ac9678f
* FIX:N1 printer image in dark mode
JIRA:STUDIO-4057
Change-Id: I22c001d96839daf213d5096f6ff6e3d6398fa8c4
* FIX: create printer issue
Jira: 5034 5059 5053
5034 create printer but filament is repeat
5039 create successful dialog remove to center
5053 create existing printer copywriting adjustments and preset updates
Delete printer secondary confirmation dialog
Change-Id: Ifb3822d1e168459d2af11e02b31ecaf3719d338a
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* ENH:just don't check the nozzle diameter
jira:[for nozzle check]
Change-Id: I678e7d62832eaa14b9be47d6dce70f29ebd601f6
* NEW:p1 and x1 series added motor noise calibration
JIRA: 5085
Change-Id: Id73cc2d34b6130f215d81ffcdc39ba6b241445bf
* ci: update build version to 01.08.00.52
Change-Id: I93d800b413f2751d132fac53fbd9b191603d0352
* FIX: ObjectSetting changed when search plate
JIRA: STUDIO-5095
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I39b1ad997d51ac4224ff5ad2b3555f56da4bd911
* FIX: invalid support params in 3rd party profiles
Many params are not right.Just use default
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5c4a1e8b046940e174f5681a79031b5f20fcafc5
* ENH: update A1 mini start gcode
Change x-axis freq sweep amp 5->10
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I2e731cc6392c0204d5e4467bf4b933ab233bc157
* FIX: [STUDIO-4946] use utf8 path to create sub process
Change-Id: I5873c114e8cd36978a7d50bf13c3aa7bf8b740ca
Jira: STUDIO-4946
* FIX: fix a plate state not correct issue
JIRA: no-jira
the object and instance states lost after undo
Change-Id: I527df9a7d426d994501a4ed5bbb198c7bbac810b
* FIX: some translation
Jira: 5096 5089 5036 5004
Change-Id: I4f1bd6e352b11451f5caf02cbc4eeb31dfa03eee
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* FIX: [STUDIO-4935] plate name edit in object list
Change-Id: I271fa217281d0c7ceca61166497136628a66681e
Jira: STUDIO-4935
* FIX: take custom root as AMS sync candicate
Change-Id: I9c71babcd74238d1533b15d77a978b19997c70c0
Jira: none
* FIX: modify some default support params in code
1. Modify default values of some supports params, so 3rd party profiles are easier to setup.
3. Fix a bug that organic support may cause crash.
Jira: none
Change-Id: Icae348d8fe5985f4287404e96089198a499283f2
(cherry picked from commit 8889cfc703b72e142f288e525b89c87619f2213c)
* FIX: do not generate sheath for normal support
Jira: none
Change-Id: I8f3f3e39171055f8d18c06ceee8e245594273238
(cherry picked from commit 93bc7ecf4346f179f502bebc3cf47b0030b56e2c)
* FIX: push_notification on GUI thread
Change-Id: Iaec347f5684fe0f65d6418759518189b67033c42
Jira: STUDIO-5106
* ENH: CLI: add some params to support more functions
1. uptodate_filaments to support update the original filaments to newest config
2. allow_rotations/avoid_extrusion_cali_region for auto-arrange
3. skip_modified_gcodes to support skip modified gcodes
JIRA: STUDIO-5112
Change-Id: I95c09af1b5462cce3bf27aea32228d6d1d1d201d
* FIX: missed manually entered values for secondary processing
Jira: STUDIO-4964
Change-Id: I5cf0da1ae77cccd34de05b4a0318a751ac9f6753
* FIX: Z hop is still enabled when upper boundary is zero.
Jira: STUDIO-4893
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I5f46a02e1fbb15ff43e253e3a184aa6cc38e7598
* ENH: update default filaments for Bambu printers
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic6380f39e546854ad0b7dc36929a8605c9ab3acc
* ENH: dailytips modification
1. modify closing behavior
2. dailytips can adjust self size according to the canvas size. And also adjust
GodeViewer legend window size
3. fix a button text encoding bug
4. support vertical/horizontal layout(horizontal layout currently not used)
jira: new
Change-Id: I8e0b6e85c455d0608d7388fb441829c1991ad01f
* FIX: [4857 5097] export list and del preset two confirm issue
Jira: 4857 5097
Change-Id: If7cc4967a663f575527a227e9c4ac31e0491930c
* FIX: UUID conflict issue when referencing volume
Jira: XXXX
3mf file standard
Change-Id: I953a87294684ea85d03a95e7d2843c096904aeae
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* FIX: [4483 5003 5109] create printer and edit filament issue
Jira: 4483 5003 5109
4483 dialog blink
5003 preset list too long
5109 encode
Change-Id: I190e12272ca09f36b841f2f85a6cf60f2c2614bd
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* FIX: cloud use presets limit notify
Change-Id: I6cc7b4e560cb83db0fc30921633b10531957128e
Jira: STUDIO-5091, STUDIO-5104
* FIX: do user preset sync later on startup
Change-Id: I0653a0438477b1c803ce1cddc66ef47f95616dae
Jira: STUDIO-5106
* FIX: linux: pressing enter in height range will crash
jira: STUDIO-4391
Change-Id: I6bf990951d1456f5b2605b8d62a05bceb3cc4c10
* FIX: failed to limit the max width of DropDown
Jira: STUDIO-4503
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: Id9352d16f4bc016daade72a9c8d3d90164a1cb3d
* FIX: not jump to preview after first wizard
Change-Id: I8c94d66a91aa15a7874441a300b40438638bd33b
Jira: STUDIO-5018
* ENH: CLI: clear custom gcodes when skip_modified_gcodes
JIRA: STUDIO-5112
Change-Id: I2e7346d2ac57519029a4e80e5492c34d3d91ed77
* FIX: [4492 4851 4883 5121] create printer issue
Jira: 4492 4851 4883 5121
Change-Id: If252b5f30be0403f79410aa8c00fc14b066d5bbd
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* ENH: add 'edit preset' and 'delete preset' btn for each preset
Jira: 5200 5113
Change-Id: I208ad63eb4b895306fa76db424da2e1df10a582e
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* FIX: add skip label before tool change
Jira: 5074
github: 2776
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Icaafd3b45da1e78c1a82e7d17d7505d9439b9100
* FIX:Network test dark mode adaptation
JIRA:STUDIO-2468
Change-Id: I20cb7f1fd8eca3ce852acb563c1cc87978e216dc
* FIX:n1 external feed prompt pop-up without retry button
JIRA: STUDIO-4696
Change-Id: I31069c72e29d3398469d71cdbc2a344a5430fc2c
* FIX: not show device page when switch printer preset
Change-Id: I00d8524625a4682b6a39876ddb66bf8bd928dbef
Jira: none
* ENH: Check the nozzle diameter when sending calibration
Jira: 4977
Change-Id: Iabbba44583bbd9fbaaa889ca546ee0ccbb2aa77f
* FIX: Generate UUID from objectID and volumeIndex
Jira: XXXX
Change-Id: I65147ef9b695f8af8de260d722e604b0e0bab563
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* FIX: disable filament_typep
Jira: XXXX
Change-Id: Ib605b33e4474525fbe49e70596fc09aa356f478a
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* ci: update build version to 01.08.00.53
Change-Id: I1d574fa2cf2a4d0eb63a38eb8ced7587d06a4272
* ENH: refine display logic of param
1. Refine the display logic of "support_interface_not_for_body".Only
toggle if support_filament is default and support_interface_filament
is specified
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia2af030c4531ad6b04a198bfe8a1677b3d20a800
* FIX: user preset sync token
Change-Id: Id2aa865b778ee9ac4cfddb68ceef0374507b519b
Jira: none
* FIX: Bitmap cache not take effect
Change-Id: I972098fdbda0b4542c6c759a8f5e1f0f2a30852b
Jira: STUDIO-4991
* NEW: Open HotModel Link With GetParam-From bambustudio
JIRA: NO JIRA
Change-Id: I4ac49bac5ee0c50988c76a38b00b7ba7dc3201f5
* NEW:AmsMaterialsSetting Support for user-preset
JIRA: STUDIO-5135
Change-Id: If848047cd5dbd059d440de30989c505c361305a7
* FIX: upload custom root preset fail
Change-Id: I621c8d542dd604b07cc5df63d97d7a31558d3aba
Jira: none
* FIX: show custom filament in AMS filament list
Change-Id: I79b9f8f2f08db8c52bbed76f1ea133baff383c00
Jira: none
* FIX: dailytips window and gcodeviwer legend window size issue
reset to original logic of dailytips and legend window size
jira: new
Change-Id: Iacb016bb222ba3f87317cfbe1f2b003802d773a5
* ENH: add text translation
jira: new
Change-Id: I780cfb8a0a64d806b5e0a414b6598e3b7bdf52dc
* FIX: Delete and search object outside the plate
JIRA:
1. STUDIO-5132 Deleting object outside the plate will crash
2. STUDIO-5146 The search function cannot search for object outside the plate
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I84cb3fe990a9c2a182e7434c262466a70545280e
* FIX: [5149 5142 5141 5140 5136] create printer and filament issue
Jira: 5149 5142 5141 5140 5136
5149 process preset name can not show all
5142 improt configs combobox not update
5141 disable modify filament_vendor
5140 disable input Bambu and Generic vendor
5136 preset list window adjust
Change-Id: I111a23996146cc16cc7f533c8616d50223d34c40
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* ci: update build version to 01.08.00.54
Change-Id: Ifd69c01a82f627a9c6cf4fe0d48a759563ee90e7
* FIX: print model from sdcard with p1p
Change-Id: If85383ba762022ead3dd754ae02a08817b891114
Jira: none
* FIX: dailytips text translation
jira: STUDIO-2556
Change-Id: If44e503615b09ee1692f42ba1f998918ec5bd691
* FIX: clone shortcut key conflict with quit in macos
jira: STUDIO-5166
Change-Id: I548f275bb68d3b0e6bb3cfad6fe93df09d507da3
* FIX:User preset material settings dependent on firmware
JIRA: 5167
Change-Id: I82cf26848594b01155883ad0aa2e9ee77d371fb2
* ENH:update the description of nozzle detection
Change-Id: Id27b25c69dc11fcf66fc82053af705906ae8c370
* FIX: [5159 5165 5171 5172] create printer and filament issue
Jira: 5159 5165 5171 5172
5159 create printer dialog no refresh
5165 create printer 2 step dialog no refersh
5171 change font
5172 edit filament dialog darkUI issue
input special character is prohibited
'/' in preset name translate to '-'
update printer combobox
Change-Id: I5fa27836dab7f604f1a065c65efa099c7a2f0f96
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* ci: update build version to 01.08.00.55
Change-Id: If1865d561cf274719204662314de163497759e89
* FIX:fix GLmodel deconstruction causing section not to be rendered
Jira: STUDIO-5156
Change-Id: Ibb2f459920989ee54f7b827352dc8893424b4de6
* FIX: missing unlock cause device or resource busy
Change-Id: I87563312ea9c6ce4e4e471da7ce7a02b53b64762
* FIX: some translation
Change-Id: I9758cbc758030b5a3945697a50ca4898af9fcb1b
* ci: update build version to 01.08.00.56
Change-Id: Id5ee53dd2ebb0b37b6927dc58b3cca94a1f66a83
* ENH: remove PLA GLOW in A1 mini
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id99c1bbd4248e28df9150a85eecec831f6f32856
* ci: update build version to 01.08.00.57
Change-Id: Ib4dfa60f097128b76b95bb14ca04978619021b56
* Allow line width of nozzle diameter * 2.5
As it were, 1 mm would be disallowed but 0.99 would be allowed for 0.4
nozzle. 1 mm is the sane maximum and 0.99 is unnecessary tedious to write.
* Russian translation update
Russian translation Bambu Studio_v1.8.0 Beta
* FIX: scale problem in needs_retraction
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Idfbe954b22fa6aa5769c55e46874fa6a80ecbf45
(cherry picked from commit 4e853f50b748e3af11e2d64862b6ee557fda361b)
* ENH: CLI: support load_assemble_list
JIRA: STUDIO-4848
Change-Id: Ife11533740988331ea71eac86c370e625970cb8b
* FIX: align to Y not working
This is a bug introduced in 7fbb650 when solving jira STUDIO-4695.
Now we use a more decent way to solve it.
Change-Id: I92deffcb9fe53e8a24c93fe973446ae37df07375
(cherry picked from commit bd98430dbd15eb6c9bb4b447990e0dcf8a50eef0)
* ENH: Add buried points for cut and meshboolean
JIRA: NONE
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I67ce498d0c335dd7a8582f56b880c2c8314f8541
* FIX: 5092 edit filament add scrolled window
Jira: 5092
Change-Id: I53ae996b04e4e2f1b1ddce6a858d505001b11615
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* FIX: can not select user preset when create filament
Jira: XXXX
github: 1936
and fix add preset for printer dialog can not show selected printer
Change-Id: Id4308c6bdca17d52d4aa321db359941aa87e0e45
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* ENH: template filament don't be show in filament list and sort
Jira: 5160 5179
Change-Id: I56a7e1897e1ef3c061dc66d318896413ca25b76b
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* FIX: [5174] export configs dialog issue
filament name too long to can not show all
Jira: 5174
Change-Id: I92018c9d7f86009b78b533592d899b4b5d78c3c8
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* ENH: add filament Bambu TPU 95A HF
1.As title
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I752ec43da6297a6c172679997ce68f2318a7b8fb
* ENH: modify some params with filaments
1.Modify the PEI bed temperature of PLA Basic, Matte, and Tough to 65 in
A1 mini. Set the bed temperature for the first layer of Bambu PETG-CF
to 65 and 70 for the other layers
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia902bbb7f824082d5346709d781cac64296f47a8
* ENH: add more status during printing
JIRA: STUDIO-5195
Change-Id: I85b3107839c6e2fdecbc10d90a876463e284468c
Signed-off-by: Stone Li <stone.li@bambulab.com>
* FIX:cut imgui has overlapping rendering on Apple
Jira: STUDIO-5150
Change-Id: I7969e19dc189cd617026a183067dad628208955c
* FIX:not TakeSnapshot for m_start_dragging_m
Jira: STUDIO-5176
Change-Id: Ia03e3e2c2664dbdcffa19ec8d0fa97dfd95e6d35
* FIX: rendered color changes
Jira: STUDIO-4956
during the drag processin connectors editing state
Change-Id: I3027176ea9f93a9ba9d6a2052f41aaa4adef79f1
* FIX: merge the patch from Prusa
Thanks for PrusaSlicer and YuSanka
Jira:STUDIO-5175
commit 510d59687b3b19c4a0f4e6540620d0694dd1b7ac
Author: YuSanka <yusanka@gmail.com>
Date: Thu Oct 5 14:13:14 2023 +0200
Follow-up 1b451cdf: Fixed#11415 - Connectors disappear when slicing => only when using multiple cut planes AND excluding parts
Change-Id: I9ccd5b85f482d723d21fccf5e104c9e0a9cc4849
* FIX:Press ESC directly to exit after entering the profile rendering
rendering is not normal，Code from PrusaSlicer,thanks for PrusaSlicer and enricoturri1966
commit a078627552f54497ed0518dc7bc349d243576d19
Author: enricoturri1966 <enricoturri@seznam.cz>
Date: Mon Jan 30 14:00:02 2023 +0100
Follow-up of 1218103fd620b319c56fd08116f81b581c537188 - Fixed gizmo missbehavior when closing a gizmo by resetting the selection clicking on the scene
Jira: STUDIO-5164
Change-Id: I261da9dba2a5ac37f3e263c175fbccd80d8045bd
* FIX: correct the strings and move create printer dialog center
Jira: 5221 5183
Change-Id: Ida4eba63f0e962ffcc8000fcc04cf20849577217
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* ENH: CLI: skip layer height limit validate when slicing for existing models
JIRA: no jira
Change-Id: I1444a28b500ca7d08ed2606eecfa5cfaf261105e
* ENH:update the translation of auto refill
jira:[for translation]
Change-Id: Iaa7b4f3d7cd88c8b4f69a3db721ebd8ca8986eea
* FIX: icon issue for copying
Jira: STUDIO-4168
Icon issue when filling bed with copies
Change-Id: I61a03ecae02b75602c236ed2810e9c9cfe5a19f9
(cherry picked from commit b5079f8a2e79f19f65803f23ef4fd83aff17c84a)
* ENH: update some filament params
1. Modify texture bed temp to 65
2. Modify max-v-speed for ABS
3. Modify some params in Generic PA
4. Modify PLA,PVA params
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I42584a6015b8526f6bbb93024316968198bd76ce
* FIX: 3770 printable checkbox incorrect display in darkUI
Jira: 3770
Change-Id: I97f67d7a0ffc41f6ee625abeecc52ee4e73cf318
* FIX:Display garbled code in AmsMaterialsSetting pop-up
Change-Id: I50531e939afa7715ae376bac47172ccf7b248114
* ENH:Modifying the Line Color of Transparent Materials
JIRA: STUDIO-4311,5088,4983
Change-Id: I9e63413dc9cd7d523f0f7f1a2e32c4537a84467a
* FIX: crash when async delete printer file
Change-Id: I92c5e812d04da263338fb0eea2fd7583cf9ecde0
Jira: STUDIO-5222
* FIX: 3733 backup time not effective
Jira: 3733
Change-Id: I50c2ce156fcbd0a17aa8a6777bce04aa6093c830
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* FIX: enable edit and delete preset btn and fix issue
Jira: XXXX
Change-Id: I724d7236b28fcc4746698f094531948a8fbb5d93
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* FIX:send print job,file name displays error
JIRA:3137
Change-Id: I1c113025d274a13fba1b845a58aada14058fadd4
* FIX: skip hold user preset from sync
Change-Id: I2252246e19bd80903ad82170782ea49535d30d05
Jira: STUDIO-5185
* FIX: 5115 translations
Jira: 5115
Change-Id: I21b03bdd4d28c0bb097226143177e763cf8c777f
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* FIX: add link for ironing parameter
Change-Id: I451f5549db3ac2205aa5703a2e5edc831e946af8
* FIX: scale problem in lift type decide
1. Scale the travel threshhold
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib594d640fe63b0919bc9318af88577513f7dbf30
* ENH: add small perimeter speed and threshold
The original param is added by Prusa. Thanks orca for adding threshold.
1. Re add small perimeter speed and threhold.
github: #2221
Change-Id: I35b269b26f085d80f0edca28650bb21fc04898d7
* FIX: modify the picture of pa manual cali
Jira: STUDIO-5102
Change-Id: Id87898959ad4461b7bd2505b159271f2aa589c36
* FIX: Filament preset is the same with the first one
Jira: STUDIO-4519
Filament preset is the same wit the first one, it should align with the
last one.
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I304d0ff0fbc1c8948d410ea552e4d42b6a4e8fd9
* FIX: scoreDailog dark mode issue
Jira: 4570
Change-Id: I8be97b306a1494f73e3bba678ecc864e7ff88ca3
* FIX: CLI: fix the slicing issue while only one object with multicolor using seq-print
JIRA: no-jira
Change-Id: Iea2d23ff8e484bf2fd58aa2f596a8e4e4292fe39
* ENH: open support wall count for normal support
1. open support wall count for normal support
Enabling this option makes normal support stronger and gives
better overhang quality, but also more difficult to removal.
Jira: STUDIO-5192
2. fix a bug where tree support (hybrid style) may get overlapped
extrusions near the walls.
3. fix a bug where raft layers can't be 1 in tree support
Jira: STUDIO-5261
Change-Id: Iadc0c67a9b50b5b221c8e83d5aa22ed282018cf8
(cherry picked from commit c0bb0084e386cb70ed6e16edf93190e4b38f5b90)
* FIX: compiling error on linux
jira: none
Change-Id: I1a4563503b5ddf74a1979cc0cee7a15b8aced904
(cherry picked from commit de52c6ca62c9f3a6314ddf5a856c1d8534329886)
* ENH: add translation for small perimeter
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I95013649e4e0c07c0f04b89a91488814c8d228cc
* FIX: clone shortcut key issue on macos
jira: STUDIO-5166
Change-Id: I1967da1d443ed43bd750dad8e11560688d7bd533
* FIX: custom gcode window cannot paste/ navigate
jira: STUDIO-5208、STUDIO-5070
Change-Id: I4ecb9d06cf5db0ae53a4678181aae9298bac106b
* ENH: modify dailytips collapse & expand interaction
jira: STUDIO-5209、STUDIO-5210
Change-Id: Ifb0b998e5004d4b49390ba5a250eaf4743bf3471
* ENH:Add shortcut keys and lists for objects search
JIRA: STUDIO-5157 STUDIO-5158 STUDIO-5240
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: Ic7cfaaa9b4bb8a85208bafab7fe3bafdb78f0045
* FIX:Re-calculate button with White Box displayed in dark mode
JIRA: STUDIO-5098
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I07cc6c72d5dbd03b72573cd27dd5938bb0e6a29a
* NEW: display plate index when printing a task
JIRA: STUDIO-2689
display on the thumbnail of the current task
Change-Id: I5f1f46c56e9d1e9120a66d491551908dfad099d6
Signed-off-by: Stone Li <stone.li@bambulab.com>
* ENH:fixed incorrect path prefix
jira:[for file path prefix]
Change-Id: Ie9e3999f02b78272e528ceceb479e746d46a7e6c
* FIX: thumbnail is not clear in dark mode
JIRA: STUDIO-5087
Change-Id: Ie86493ed71b5554095927f061509a1f551758b61
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
* FIX: translation
Jira: XXXX
Change-Id: Id03f0d704aa852632a907ea628d1277400112062
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* ENH: first nozzle change to 0.4 and nozzle change to mm
Jira: XXXX
Change-Id: I14defd36442dbd7008e46782b08415b6244224f1
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* ENH:editing_window_width's value is small on the laptop
Jira: STUDIO-5238 STUDIO-5265
apply_selected_connectors should check_and_update_connectors_state
Change-Id: I8c2c1c920cc4d197d1908815a3e62f4962335451
* FIX: fix new_bed_shape's calculation process
Jira: STUDIO-5122
Change-Id: I5f3e6a301a297123af28692c90bef6759f425b06
* ENH:update some translations
jira:[STUDIO-5262]
Change-Id: Idb1d3586888043ac325f272bc7a2b788adb3e9e5
* FIX: edit text command resets object settings
Jira: STUDIO-4655
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: Iac25c4e40f1d0d32e6d1f40e62226cc22bc96042
* ci: update build version to 01.08.00.58
Change-Id: Iacfec02aa50c617e4c9fe566319b07b30d47dce1
* FIX: remove GetUserAgent
Change-Id: I92886e1f0dcb091109231a10da8c19d51178e13b
Jira: STUDIO-5205
* FIX: nozzle_diameter_map data structure adjustment
Change-Id: Ifb724afc0fcf974e6d331e73ecac723107a102cf
* ENH:add _A and _B for perform_with_groove
Jira: STUDIO-5267
Change-Id: Iee3310dfa1cd8e6680310f0af0eff5c817490813
* ENH:is_equal for min_z and max_z
Jira: STUDIO-5267
Change-Id: I9493883d8be9d44e26ddc9afe62b7e9eb09c5052
* ci: update build version to 01.08.00.59
Change-Id: Ie8ed29ccf5d6c94594eb2ab8b717416fbeace3bd
* FIX:Image display unclear in light mode
JIRA:5161
Change-Id: I134cc64a2af0dfff60c47d0ff09d78d9c0f86b3f
* FIX:fix bugs of non manifold edge
Jira: STUDIO-5267
Change-Id: I8ac9a2cf96da0bc07ee00b309e65611b92fd174d
* ENH:nozzle type detection
jira:[STUDIO-5246]
Change-Id: Ic41a2161a0e41d23f56af93ad8ec34cc83ada0e3
* ENH: upadte P1S start gcode
1.turn on MC board fan by default on P1S
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5b2f7868e350942fb8b7baf7d429e22a0987184a
(cherry picked from commit e866a575b6b7d9552f7412f84272f4b48dfc3961)
* ENH: improve support style's tooltip
jira: none
Change-Id: I8ee858d7052f04ce7ea6b226a500c7d1bf8a482f
(cherry picked from commit 665f31c4fcde22bd894cbb4a5fb160635947f2a4)
* ENH: set layer range error to warning
1. If layer range exceeds maximum/minimum layer range in printer
settings,pop up a window to warn
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I0304ee790e557ecf967f355c171993d1f51b5057
* ENH: CLI: remove the warning of layer height
JIRA: no jira
Change-Id: Idaceee4f52611479fc3f4238d016d891b4dc8cd1
* FIX: the word search is not translated
Jira: STUDIO-5224
The world search in the device panel is not translated.
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: Ia3d651c2159a3aad94e10cd0a6da98848f53ee2a
(cherry picked from commit 4a46a0a4750d82d49c9523f4b668a1a00c41ed83)
* FIX: Bitmap will flash when sending printing task
Jira: STUDIO-5278
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: Ib0c8710b8d5d6b98fad043c950f054aa35bea965
* ENH:display the euler angle of rotation plane
Jira: STUDIO-5268
Change-Id: I6b7b431931d60f1a9a832908400417781798c472
* ci: update build version to 01.08.00.60
Change-Id: I1c15b5c6437554c43327cd6b537f7a5860dba5a0
* ENH:cancel EnterReturnsTrue for imgui in cut
Jira: STUDIO-5269
Change-Id: I2832e1dccaf9755448debe7b2bd56426f90dfe0d
* ci: update build version to 01.08.00.61
Change-Id: Ib03e664a20990322c788686550c491d0139d8237
* FIX: some translation problems
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If9f2af53b4f0bfa9469e84bcba68cc182df4a473
* add: Ukrainian lang support for 1.8
* fix linux
* fix some string and colors
* fix linux build error 2
* fix .gitignore
* FIX: calibration selected preset is null in some case
jira: STUDIO-5258
Change-Id: Iee63593c5f833c5a43e3b1d1c9ddb82f8c69569a
* FIX: create filament issue
Jira: 5296 5297 5295 5302 5311 5276
5296 create filament: list has same printer
5297 create filament: filament combobox has blank options
5298 edit filament: delete last preset prompt users
5302 create filament: filament combox has cili preset
5311 create filament: printer name too long to can not show all
5276 edit filament: PLA Aero filament type filter issue
add prusa vendor
Revised copy
Change-Id: I5dcc615ce0951b1a9953fa12283f6090f5069045
* FIX: some translation
Change-Id: Icb8614a0af18f96d15f3b97c17e0f6f708296847
* FIX:cancel is_equal for slicing function
Jira: STUDIO-5267
Change-Id: I66d759aa2c968f8a28a6a5d8378929754f2db689
* FIX:UI stuck due to pop-up window with wrong chamber temperature
JIRA: 5304
Change-Id: I1a49a7219b7a6f5700243704c348724e7930ce1a
* FIX: allow input '+' and hide edit preset btn
Change-Id: I97aec7c3ac4cc8b9d6c535f0126aaa1926553d86
* ENH: handle printer direct close and not retry
Change-Id: I5dd55f8085cf6383a8420ab41e614ea6ae210c78
Jira: STUDIO-5305
* ci: update build version to 01.08.00.62
Change-Id: I09716bf79354b503197c751272fd3171e0abc8fd
* add: new translation to ukr for AirFlow and Prusa
* add: Texture Plate name fix
* add new feature to localization .de, fix .it (#2876)
* FIX:add slice_facet_for_cut_mesh api for cut tool
and modify section_vertices_map 's traverse
Jira: STUDIO-5267
Change-Id: Ifc4b183a4e4c4fdb4f47742f14f70a1ed93fa056
Change-Id: I52bfaef8926ef967b78a6cb712a1731a1b528a24
* FIX: Make the front smaller for Czech in device panel
Jira: STUDIO-5151
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I315174b55f923da069854fb4fed8cf3937b82074
* FIX: there is no object can be jumped to in notification
jira: new
Change-Id: Ib81bf49236952ede24a2de126051572d63916e01
* FIX: add height range, modifier in Preview pane will crash
jira: STUDIO-5340
1. fix crash at add height range, modifiers in Preview from objectList
2. fix an assert hit when slicing
3. fix an assert hit when enter AssembleView
4. forbidden popup menu by right-click objectList in Preview
Change-Id: I444bc76b1a4307999b387e4f60386b2d272bd308
* FIX: Black spot in the sending printing task page
Jira: STUDIO-5307
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I3bd97c063ec5f0faf7d12047da39f60ce55cae4b
* FIX: reset_cut_by_contours should update_buffer_data
Jira: STUDIO-5376
Change-Id: I5aacb1f7b65822031d7138abd61a45b09c743531
* ENH:editing_window_width's value is small on the laptop
Jira: STUDIO-5238 STUDIO-5265
Change-Id: Ia958772bcb081817da621115f99328bb62770cd5
* ENH: bumped version to 1.8.1
Change-Id: I9d25403daa5b7b8ca415c0b364670da9e0f932b0
* FIX: create filament dialog: create btn can not show all
Jira: 5310 5331
Change-Id: I185272c90d9ff1c3d6b47abbefbf488d0d965cca
* FIX:update custom_texture when new_shape=false
Jira: STUDIO-5287
Change-Id: I3add95f9f9345c14a48cc7467513d1b3ce95f4c9
* ENH:editing_window_width's value is small on the laptop
Jira: STUDIO-5238
Change-Id: I9044129f4e0c8ca7469db05b3e547fca4754342a
* FIX:add slash_to_back_slash for saving file path
Jira: STUDIO-5287
Change-Id: I9f3c176cd0831c793958f08601c63efac98176a4
* FIX: a button color didn't response to dark mode change
jira: STUDIO-5315
Change-Id: I95489f01ccd1f77b9e95b0d0f69e5398d2e88487
* FIX: height range layers displayed in wrong position
jira: STUDIO-5341
Change-Id: I83918b4624f367efa54321f1898e1176cdb04ea9
* FIX: auto arranging issues with locked plates
1. global auto arranging may put items overlap with wipe tower if some plates are locked
jira: STUDIO-5329
2. items outside bed may overlap with plate boundary if it's rotated
jira: STUDIO-5329
3. plate-wise auto arranging uses wrong min_obj_distance if the
plate is by-layer printing but global setting is by-object printing
jira: STUDIO-5330
Change-Id: I5dba2f1317e183c9aeec1cb2bd227fbddf4316e6
(cherry picked from commit db1eac41efff5f1e8d5ac0af74c6fc7ab59fc253)
* FIX: a mistake in upward machine
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ibdb26c3d904634f322aef0dc0c7b8867d9fb5854
* FIX:a blank pop-up appears
JIRA:XXXX
Change-Id: Ice92b55204e4897fec024a6d99412eb810bddd4a
* FIX:fixed failure in updating nozzle type
jira:[STUDIO-5248]
Change-Id: Iad37b5d5b76d37cb1723ef21d7c39b1e3fcaf8d7
* FIX:fixed issue with AI monitoring settings
jira:[STUDIO-5082]
Change-Id: I967fe3c1e9da61a55bcbfaa2a8e067dd5af18f72
* FIX:fixed issue with lan mode
jira:[STUDIO-5189]
Change-Id: I1d0a05f19dcea154cf3ef2b61ed0546d3581905e
* FIX:update text for loading or unloading filaments
jira:[STUDIO-5231]
Change-Id: Ic7729c3ec012485b3d87e3d01f11e87502c67895
* FIX: Revert "ENH: do not leave a gap for top...
Revert "ENH: do not leave a gap for top interface if the top z distance is 0"
This reverts commit 79ea32c7cbbdb7e689637980af7c36caf42284c9.
Revert reason: the supports are impossible to remove in some cases.
jira: STUDIO-5385
Change-Id: I376a6f4dfd78da6dfea68b9ac3d552cddd0b4272
(cherry picked from commit 34e38b705fde7f5d7f9a3a89c96a3627ce0c998e)
* ENH: improve normal support's quality
1. Add a base_interface_layer when using Supp.W
2. Fix a bug where base_angle and interface_angle are wong
jira: STUDIO-5386
Change-Id: I52ab32c63b3cd1e6e2ba6463b01ae26699cf13d3
(cherry picked from commit 92ddd4a10b793572a1fa009da5b9e44fcdf81de2)
* NEW:tracking stl model files
jira:[STUDIO-5372]
Change-Id: Idb1275b07441f0cd06c24588d5f7c20f81f1556c
* FIX: edit filament dialog: preset name too long to del btn nan't show
Jira: 5336 5174
and verify string normalization
Change-Id: I380c3bed2bf43d01094b68979a8b67f4187c0b93
* FIX: some translation
Jira: 5232 5300 5334
Change-Id: Ie474ca823011e81aab82a9809af3d6e42980496b
* FIX: some translation
Change-Id: Iaabe6087bed3b7d47d911cf4fb51c770804e72fb
* ENH: change default tree_support_wall_count to 0
Now normal support also uses this option, so we can't default it to 1, otherwise normal supports will be too hard to remove.
jira: none
Change-Id: Ic5700af5c17e3a7b265c8915f28b0db35c6e06e6
(cherry picked from commit 6b84a9826da108b76569e686bd9def0b23ae29fd)
* FIX:The name of the material in the error prompt is empty
JIRA:STUDIO-4907
Change-Id: I3cf44f099256a51f21a44a89c89c000f734d1f36
* ci: update build version to 01.08.01.51
Change-Id: Ib20f5a12b65472102befec0a2adf82744fc29c46
* FIX: imgui textinput cannot paste on macos
jira: STUDIO-5070、STUDIO-5365
Change-Id: Iea8f41e12744ecda0fbb95c1a8f2e014a7cdc384
* FIX: not cache printer file list on error
Change-Id: I99843aedbf14d3d1d553ccac9b0bd26403274a82
Jira: none
* FIX: thread of close BBLUserPresetExceedLimit notify
Change-Id: I9698134ba1cc91fc83eac441f900d68c4c4b556a
* ENH: Resolve non manifold edges by fixing model interfaces
Jira: STUDIO-5124
Change-Id: I7ea86be44acb80b6c4762a76208b4a031acd0b27
* FIX:nozzle type sync
jira:[STUDIO-5248]
Change-Id: I63d48628832473d8d371ed643dc8528b00382531
* FIX: array bound happen in TriangleSelector::deserialize
Jira: STUDIO-5170
Change-Id: I92b72a887845b462fad208f13607293b44d3d333
* FIX:cropping rendering without considering assembly views
Jira: STUDIO-5260
Change-Id: Ia56cf80b305ae05f25f06ec277f85b3c5430a6df
* FIX: PA for custom filament not available in BL Studio
github: 2971
Change-Id: I6ccd36a183e7367d69557300f7242f5403f4bb33
* FIX: Bitmap is way too small on Mac
Jira: STUDIO-5393
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I6b550669fa8cd5fc9bfa6ed96d64d19a949f01b2
* FIX: move shutdown wait to OnExit
Change-Id: I70d9a2bb686525ae5273aa9d63e25691da4ab65c
Jira: STUDIO-2884
* FIX: calibration manage result dialog issue on macos
jira: STUDIO-4949 STUDIO-5378
Change-Id: I00abefd45a0d274a4b68bb1ab18debe8f91d169e
* FIX: adjust bed shape dialog button UI style
fix that button text is hard to see in dark mode
jira: STUDIO-5247
Change-Id: I2cf5b3cdd2eff9b821bdf5525bec4f329fc58dd1
* FIX: 5331 rescale btn
Jira: STUDIO-5331
Change-Id: If153424b8480e64b166018e3cd98c17db557d0a8
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
* FIX: support do not generate
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ide9709d95203185538e280517f7aa6136beeda44
* FIX: remove not match printer config ota cache
Change-Id: Ib73fc2ea31fa2186061cfcb5a170bc59b9db84ca
Jira: none
* FIX:cancel the variable of "checkbox_size" as a fixed value
Jira: STUDIO-5150
Change-Id: I30d876d141b8b35ab4a3fee4889993d87b7c1741
* ENH:add reset_cut_by_contours in on_load function
Jira:STUDIO-5269
m_connector_size_tolerance default value is 0.1f
Change-Id: I6c67fff3cb0c1190e9141ed6f68fbfa848679f35
* ENH:cancel EnterReturnsTrue for imgui in cut
Jira: STUDIO-5269
Change-Id: Ifc4b183a4e4c4fdb4f47742f14f70a1ed93fa056
Signed-off-by: zhou.xu <zhou.xu@bambulab.com>
* FIX: dailytips should not change content frequently when slicing all
jira: STUDIO-5234
Change-Id: Icb7e9c28404d9db8ebed58d937e13f89c5403b5c
* FIX: objectList clone shortcut key issue
jira: new
Change-Id: Ia75bf58a7d53f962e1af6c2fd97497270b7eea84
* ENH:handling cases without msgs
jira:[STUDIO-5401 STUDIO-5399]
Change-Id: Iae651d5a19a45b0138a6aa621326a8b4a9649824
* ENH: optimize param description
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id0ca9224227a716b21fc0b8430722264dc319344
* ENH: add translation
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3b1f04fee3cd6322793794ad8b8707859f6c7d26
* FIX: close edit preset paramsDialog, mac unresponsive
Jira: 5298
Change-Id: I021e00567354cfb1f2f5f1f2bf6ba1fc35b164c5
* ENH:disable AI monitoring on the p1p series
Change-Id: I514bb1fb1ced6c03dd619230a9adac3be63f2de2
* ci: update build version to 01.08.01.52
Change-Id: I9f5e30d3fc4b7ef9321c522d3c18fce98f03742f
* FIX: close edit preset paramsDialog, mac unresponsive
Change-Id: Ic816754a20b7f6a5cdb46475750eb301fec3ad3a
* FIX: organic support not work with raft only
There is no raft generated when only raft enabled but no support needed.
jira: none
Change-Id: Ic0c9269e2f98038d85c9bc54e4a85f892dc5d764
* FIX: CLI: add object config when assemble
JIRA: no jira
Change-Id: I945f820fb58f2f643170b4b0b66742f6bbbdfd29
* FIX: delete preset prompt
Jira: XXXX
Change-Id: I6511c806c56393d4f6bd72d1c506da59675d49ff
* FIX:Reorganize the assignment of variables of "m_editing_window_width"
Jira: STUDIO-5238
Change-Id: If369916f3f5c21510f5f297bfd05c1230bdda7a4
* ENH: CLI: re-compute flush_volumes_matrix when it is missed
Change-Id: Ie8f53c6bef003b1434de02ea14de5787b376484f
* FIX: some translation for delete filament
Change-Id: Ib46a8eba33f2e21016476aaab4a57a740e86b1b8
* FIX: scrolled window / del preset / edit filament issue
Jira: 5092
GitHub: 1936
edit filament: just one preset, the scroll bar obscures the preset name
edit filament: delete selected preset, click no, but preset be deleted
from UI
edit filament: serial sometimes displays incorrectly
Change-Id: Ibc91609e252179de0c05ca065099756da6631165
* ci: update build version to 01.08.01.53
Change-Id: I5563a2c0812ab9a0d7727df27e17e681066ffa08
---------
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Signed-off-by: Stone Li <stone.li@bambulab.com>
Signed-off-by: zhou.xu <zhou.xu@bambulab.com>
Co-authored-by: zorro.zhang <zorro.zhang@bambulab.com>
Co-authored-by: liz.li <liz.li@bambulab.com>
Co-authored-by: maosheng.wei <maosheng.wei@bambulab.com>
Co-authored-by: chunmao.guo <chunmao.guo@bambulab.com>
Co-authored-by: tao wang <tao.wang@bambulab.com>
Co-authored-by: Arthur <arthur.tang@bambulab.com>
Co-authored-by: lane.wei <lane.wei@bambulab.com>
Co-authored-by: gerrit <gerrit@bambulab.com>
Co-authored-by: xun.zhang <xun.zhang@bambulab.com>
Co-authored-by: zhou.xu <zhou.xu@bambulab.com>
Co-authored-by: hu.wang <hu.wang@bambulab.com>
Co-authored-by: Kunlong Ma <kunlong.ma@bambulab.com>
Co-authored-by: wenjie.guo <wenjie.guo@bambulab.com>
Co-authored-by: qing.zhang <qing.zhang@bambulab.com>
Co-authored-by: zhimin.zeng <zhimin.zeng@bambulab.com>
Co-authored-by: the Raz <rasmus@abc.se>
Co-authored-by: Andy <andylg@yandex.ru>
Co-authored-by: Stone Li <stone.li@bambulab.com>
Co-authored-by: enricoturri1966 <enricoturri@seznam.cz>
Co-authored-by: Dmytro Chystiakov <dlchistyakov@gmail.com>
Co-authored-by: Heiko Liebscher <hliebscher@idn.de>
* Overhang perimeter handling
Updated code to handle overhang perimeters as an overhang and not as a bridge.
* Preparing to add curled extrusions identification
* Porting curling calculations from Prusa Slier 2.6.1
* Prototype 1 - slowdown extended to detect curled edges and further reduce speed
First prototype of the code submitted.
* Working prototype - 2
Code is now finally working - external perimeters are slowed down as needed when there is likelyhood of curling up.
ToDo:
1. Reslicing the model causes the algorithm not to run - need to find where this fails to trigger the call for this.
2. Slowdown of internal perimeters not working yet.
* Updated to use overhang wall speed instead of bridging speed for this algorithm
* Fixed bug in speed calculation and tweaked parameters for high speed printer
Fixed bug in speed calculation and tweaked parameters for high speed printer
* Attempting to fix "set started" not being set
* Parameter tweak after print tests
* Fixed estimation not running when model is re-sliced.
* Removing debug printf statements and fixed threading flag.
* Fixed threading
* Parameter tweaks following print tests
* Made this as an option in the GUI
* Reintroduced handling of bridges as per original design
* UI line toggling when option makes sense to be visible.
* Fixed bug in field visibility & made it default to off
* Code optimisation
* Initial commit of code from Prusa Slicer 2.6.1
* Ported ExtrusionRole from Prusa Slicer 2.6.1
* fix compile errors
* Update GCode.hpp
* code changes to invoke pressure equalizer
* attempting to trigger pressure equalizer
(Not compiling)
* Update Fill.cpp
* Update Fill.cpp
* Pressure equaliser layer result update
* Further commits
* Merged PR https://github.com/prusa3d/PrusaSlicer/pull/9622
* First complete working version
* Update PressureEqualizer.cpp
* Implemented parameter in GUI
* Toggle fields according to compatibility
* Updated UI toggles between extrusion rate slope and arc fitting.
* Updated tooltip
* Introduced parameter smoothing segment length
This parameter influences the number of division a line will undergo in response to the requirement to adhere to the extrusion rate flow adjustment.
* Internal parameter and tool tip tweaking
* Parameter and tool tip tweaking
* Updated parameters and tooltip following testing.
* Sync PressureEq with latest PrusaSlicer
* Revert "Sync PressureEq with latest PrusaSlicer"
This reverts commit 131fb94c6bebe0a6abb3ca28d4a162aacbe75f40.
---------
Co-authored-by: MGunlogson <MGunlogson@users.noreply.github.com>
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
As title.Use the same way to decide exhaust fan.
Removes end print exhaust fan control.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id14f3d91171b81239b336ef879061c6de7d68edf
Support controlling chamebr temperature and exhaust fan for air filtration
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I31627ce4f8acce99e132b0436ab7dcd0bcebf81d
the amount of total extruded material and per extruder extruded material
up to the point the value is evaluated:
"extruded_volume", "extruded_weight",
"extruded_volume_total", "extruded_weight_total"
Mark code from OrcaSlicer with same comment tag for follow easily
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: If4db502a1b0e6d0648c73f2f383b6d1cc8e1aa01
Thanks OrcaSlicer.
This is just function for klipper printer.
NEVER used for BBL printer.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I910abceb67f4dcb4260f74f5dd1b4fb614812670
Should never use these two setting for bambuPrinter.
Thanks original code from OrcaSlicer.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ifda4086b71fd2ef170b044c7632d15fe2ef490fd
pa calibration for 3rd party printer and retraction calibration
Change-Id: Ifeb12807cdce366c9d265a0490b320224dfb23fe
(cherry picked from commit 732adceeef43c9c957468ab490f0e3ee20f3173b)
Enable label object when does not print with multi
filament and object number is smaller than 65
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Id670c6a5258f266076bc0a52c50ab5a28386f242
(cherry picked from commit 40248347908788ce6303ed255826011127d8eaa3)
This is fix for z hop issue that z hop of
layer change is always spiral list even when set
to normal lift
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I7b235a640b0538bedfe4cef61ca24108c1ba7246
If a travel path goes through an overhang expolygons, and their distance
is shorter than threshold, lift type will be set to SpiralLift.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I345788711755dd8611ecf385818e6052cd8abe9e
Add default type to plate bed types.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I26f3a64dba4a19b0d882b828f1ee54c84df1879c
(cherry picked from commit 1ebed465d2b3bcd482dd4ba7a5930b721c79fc13)
