amd/orcaslicer
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions 1
orcaslicer/resources/profiles/FLSun/machine/FLSun SR 0.4 nozzle.json
Flsun3d 7b6b5a3f81
Improved Flsun S1,T1 configuration parameters (#6244) 
* Add files via upload

* Add files via upload

---------

Co-authored-by: SoftFever <softfeverever@gmail.com>
2024-08-03 00:01:44 +08:00

238 lines
No EOL
7.6 KiB
JSON
Raw Blame History

{
"type": "machine",
"setting_id": "GM003",
"name": "FLSun Super Racer 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_machine_common",
"printer_model": "FLSun Super Racer (SR)",
"default_print_profile": "0.20mm Standard @FLSun SR",
"gcode_flavor": "marlin",
"nozzle_diameter": [
"0.4"
],
"nozzle_type": "brass",
"default_filament_profile": [
"FLSun Generic PLA"
],
"bed_exclude_area": [
"0x0"
],
"auxiliary_fan": "0",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]",
"change_filament_gcode": ";FILAMENT_CHANGE\nM600",
"deretraction_speed": [
"40"
],
"extruder_clearance_height_to_lid": "140",
"extruder_clearance_height_to_rod": "36",
"extruder_clearance_radius": "65",
"machine_end_gcode": "; printing object ENDGCODE\nG92 E0.0 ; prepare to retract\nG1 E-6 F3000; retract to avoid stringing\n; Anti-stringing end wiggle\n{if layer_z < max_print_height}G1 Z{min(layer_z+100, max_print_height)}{endif} F4000 ; Move print head up\nG1 X0 Y120 F3000 ; present print\n; Reset print setting overrides\nG92 E0\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extruder factor to 100%\n;M900 K0 ; reset linear acceleration(Marlin)\n; Shut down printer\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM18 S180 ;disable motors after 180s\nM300 S40 P10 ; Bip\nM117 Print finish.",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"5000",
"2000"
],
"machine_max_acceleration_retracting": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"3000",
"3000"
],
"machine_max_acceleration_x": [
"5000",
"2000"
],
"machine_max_acceleration_y": [
"5000",
"2000"
],
"machine_max_acceleration_z": [
"1500",
"200"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
],
"machine_max_jerk_x": [
"9",
"9"
],
"machine_max_jerk_y": [
"9",
"9"
],
"machine_max_jerk_z": [
"3",
"0.4"
],
"machine_max_speed_e": [
"30",
"25"
],
"machine_max_speed_x": [
"300",
"200"
],
"machine_max_speed_y": [
"300",
"200"
],
"machine_max_speed_z": [
"20",
"12"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"machine_pause_gcode": "M600",
"machine_start_gcode": ";STARTGCODE\nM117 Initializing\n; Set coordinate modes\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n; Reset speed and extrusion rates\nM200 D0 ; disable volumetric E\nM220 S100 ; reset speed\n; Set initial warmup temps\nM117 Nozzle preheat\nM104 S100 ; preheat extruder to no ooze temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM300 S40 P10 ; Bip\n; Home\nM117 Homing\nG28 ; home all with default mesh bed level\n; For ABL users put G29 for a leveling request\n; Final warmup routine\nM117 Final warmup\nM104 S[first_layer_temperature] ; set extruder final temp\nM109 S[first_layer_temperature] ; wait for extruder final temp\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM300 S440 P200 ; 1st beep for printer ready and allow some time to clean nozzle\nM300 S0 P250 ; wait between dual beep\nM300 S440 P200 ; 2nd beep for printer ready\nG4 S10 ; wait to clean the nozzle\nM300 S440 P200 ; 3rd beep for ready to start printing\n; Prime line routine\nM117 Printing prime line\n;M900 K0; Disable Linear Advance (Marlin) for prime line\nG92 E0.0; reset extrusion distance\nG1 F3000 Z1\nG1 X-150 Y0 Z0.4\nG92 E0\nG3 X0 Y-130 I150 Z0.3 E30 F2000\nG92 E0.0 ; reset extrusion distance\n; Final print adjustments\nM117 Preparing to print\n;M82 ; extruder absolute mode\nM221 S{if layer_height<0.075}100{else}95{endif}\nM300 S40 P10 ; chirp\nM117 Print [input_filename_base]; Display: Printing started...",
"machine_unload_filament_time": "0",
"max_layer_height": [
"0.2"
],
"min_layer_height": [
"0.08"
],
"printable_area": [
"134.486x11.766",
"132.949x23.4425",
"130.4x34.9406",
"126.859x46.1727",
"122.352x57.0535",
"116.913x67.5",
"110.586x77.4328",
"103.416x86.7763",
"95.4594x95.4594",
"86.7763x103.416",
"77.4328x110.586",
"67.5x116.913",
"57.0535x122.352",
"46.1727x126.859",
"34.9406x130.4",
"23.4425x132.949",
"11.766x134.486",
"8.26637e-15x135",
"-11.766x134.486",
"-23.4425x132.949",
"-34.9406x130.4",
"-46.1727x126.859",
"-57.0535x122.352",
"-67.5x116.913",
"-77.4328x110.586",
"-86.7763x103.416",
"-95.4594x95.4594",
"-103.416x86.7763",
"-110.586x77.4328",
"-116.913x67.5",
"-122.352x57.0535",
"-126.859x46.1727",
"-130.4x34.9406",
"-132.949x23.4425",
"-134.486x11.766",
"-135x1.65327e-14",
"-134.486x-11.766",
"-132.949x-23.4425",
"-130.4x-34.9406",
"-126.859x-46.1727",
"-122.352x-57.0535",
"-116.913x-67.5",
"-110.586x-77.4328",
"-103.416x-86.7763",
"-95.4594x-95.4594",
"-86.7763x-103.416",
"-77.4328x-110.586",
"-67.5x-116.913",
"-57.0535x-122.352",
"-46.1727x-126.859",
"-34.9406x-130.4",
"-23.4425x-132.949",
"-11.766x-134.486",
"-2.47991e-14x-135",
"11.766x-134.486",
"23.4425x-132.949",
"34.9406x-130.4",
"46.1727x-126.859",
"57.0535x-122.352",
"67.5x-116.913",
"77.4328x-110.586",
"86.7763x-103.416",
"95.4594x-95.4594",
"103.416x-86.7763",
"110.586x-77.4328",
"116.913x-67.5",
"122.352x-57.0535",
"126.859x-46.1727",
"130.4x-34.9406",
"132.949x-23.4425",
"134.486x-11.766",
"135x-3.30655e-14"
],
"printable_height": "330",
"printer_technology": "FFF",
"printer_variant": "0.4",
"printhost_apikey": "",
"printhost_authorization_type": "key",
"printhost_cafile": "",
"printhost_password": "",
"printhost_port": "",
"printhost_ssl_ignore_revoke": "0",
"printhost_user": "",
"retract_before_wipe": [
"70%"
],
"retract_length_toolchange": [
"2"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"6.5"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"40"
],
"template_custom_gcode": ";FILAMENT_CHANGE\nM600",
"thumbnails": [
"260x260"
],
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.3"
],
"z_hop_types": [
"Normal Lift"
]
}
Reference in a new issue View git blame Copy permalink