amd/orcaslicer
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions 1
orcaslicer/resources/profiles/BBL/filament
History
salt.wei dd7dbd9936 ENH: modify generic pa-cf cooling setting 
Bambu pa-cf has been modified, generic pa-cf
should be changed as well

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ie859b41bd4d138a5fab204d6ad6a79806c3f0a9b
2022-12-15 04:38:15 -05:00
..
P1P ENH: modify generic pa-cf cooling setting 2022-12-15 04:38:15 -05:00
Bambu ABS @base.json NEW: show cost of filament in GUI 2022-09-02 12:52:18 +08:00
Bambu ABS @BBL X1C 0.2 nozzle.json NEW: add preset of 0.2 nozzle X1 2022-09-08 21:49:36 +08:00
Bambu ABS @BBL X1C 0.8 nozzle.json NEW: add preset of 0.6 & 0.8 X1C 2022-09-02 12:52:18 +08:00
Bambu ABS @BBL X1C.json NEW: add preset of 0.6 & 0.8 X1C 2022-09-02 12:52:18 +08:00
Bambu PA-CF @base.json ENH: support force cooling for outer wall only 2022-12-15 04:33:48 -05:00
Bambu PA-CF @BBL X1C.json ENH: support force cooling for outer wall only 2022-12-15 04:33:48 -05:00
Bambu PC @base.json ENH: modify the preset of some filaments 2022-09-29 11:16:43 +08:00
Bambu PC @BBL X1C 0.2 nozzle.json NEW: add preset of 0.2 nozzle X1 2022-09-08 21:49:36 +08:00
Bambu PC @BBL X1C 0.6 nozzle.json NEW: add preset of 0.6 & 0.8 X1C 2022-09-02 12:52:18 +08:00
Bambu PC @BBL X1C 0.8 nozzle.json NEW: add preset of 0.6 & 0.8 X1C 2022-09-02 12:52:18 +08:00
Bambu PC @BBL X1C.json ENH:add parameters of filaments 2022-08-26 09:25:59 +08:00
Bambu PET-CF @base.json ENH: increase the temp of some plate to improve the print result 2022-12-15 04:33:48 -05:00
Bambu PET-CF @BBL X1C.json Add the full source of BambuStudio 2022-07-15 23:42:08 +08:00
Bambu PLA Basic @base.json NEW: show cost of filament in GUI 2022-09-02 12:52:18 +08:00
Bambu PLA Basic @BBL X1.json ENH: align the parameter 2022-12-15 04:38:15 -05:00
Bambu PLA Basic @BBL X1C 0.2 nozzle.json NEW: add preset of 0.2 nozzle X1 2022-09-08 21:49:36 +08:00
Bambu PLA Basic @BBL X1C 0.8 nozzle.json ENH: add filament configure of 0.2 nozzle 2022-09-02 12:52:18 +08:00
Bambu PLA Basic @BBL X1C.json Add the full source of BambuStudio 2022-07-15 23:42:08 +08:00
Bambu PLA Impact @base.json Add the full source of BambuStudio 2022-07-15 23:42:08 +08:00
Bambu PLA Impact @BBL X1C.json Add the full source of BambuStudio 2022-07-15 23:42:08 +08:00
Bambu PLA Matte @base.json NEW: show cost of filament in GUI 2022-09-02 12:52:18 +08:00
Bambu PLA Matte @BBL X1.json ENH: align the parameter 2022-12-15 04:38:15 -05:00
Bambu PLA Matte @BBL X1C 0.2 nozzle.json NEW: add preset of 0.2 nozzle X1 2022-09-08 21:49:36 +08:00
Bambu PLA Matte @BBL X1C 0.8 nozzle.json ENH: add filament configure of 0.2 nozzle 2022-09-02 12:52:18 +08:00
Bambu PLA Matte @BBL X1C.json Add the full source of BambuStudio 2022-07-15 23:42:08 +08:00
Bambu PLA Metal @base.json Add the full source of BambuStudio 2022-07-15 23:42:08 +08:00
Bambu PLA Metal @BBL X1C.json Add the full source of BambuStudio 2022-07-15 23:42:08 +08:00
Bambu Support G @base.json ENH: increase the temp of some plate to improve the print result 2022-12-15 04:33:48 -05:00
Bambu Support G @BBL X1C.json NEW: add nozzle_hrc and filament required hrc 2022-12-15 04:33:48 -05:00
Bambu Support W @base.json ENH: modify the preset of some filaments 2022-09-29 11:16:43 +08:00
Bambu Support W @BBL X1.json ENH: align the parameter 2022-12-15 04:38:15 -05:00
Bambu Support W @BBL X1C 0.2 nozzle.json ENH: align the parameter 2022-12-15 04:38:15 -05:00
Bambu Support W @BBL X1C.json ENH:add parameters of filaments 2022-08-26 09:25:59 +08:00
Bambu TPU 95A @base.json ENH: modify the preset of some filaments 2022-09-29 11:16:43 +08:00
Bambu TPU 95A @BBL X1.json ENH: align the parameter 2022-12-15 04:38:15 -05:00
Bambu TPU 95A @BBL X1C.json ENH: revise the filament preset. 2022-09-02 13:16:54 +08:00
fdm_filament_abs.json ENH: increase the temp of some plate to improve the print result 2022-12-15 04:33:48 -05:00
fdm_filament_asa.json ENH: increase the temp of some plate to improve the print result 2022-12-15 04:33:48 -05:00
fdm_filament_common.json ENH: close the fan if the filament end 2022-12-15 04:33:48 -05:00
fdm_filament_pa.json ENH: increase the temp of some plate to improve the print result 2022-12-15 04:33:48 -05:00
fdm_filament_pc.json ENH: revise the filament preset. 2022-09-02 13:16:54 +08:00
fdm_filament_pet.json ENH: modify the start_code & virification temperature of PETG & TPU 2022-09-14 17:39:11 +08:00
fdm_filament_pla.json ENH: modify the preset of some filaments 2022-09-29 11:16:43 +08:00
fdm_filament_pva.json ENH: modify the preset of some filaments 2022-09-29 11:16:43 +08:00
fdm_filament_tpu.json ENH: modify the start_code & virification temperature of PETG & TPU 2022-09-14 17:39:11 +08:00
Generic ABS @0.2 nozzle.json NEW: add preset of X1 0.2mm nozzle 2022-10-09 10:37:45 +08:00
Generic ABS @base.json ENH: add filament configure of 0.2 nozzle 2022-09-02 12:52:18 +08:00
Generic ABS.json NEW: add preset of 0.6 & 0.8 X1C 2022-09-02 12:52:18 +08:00
Generic ASA @0.2 nozzle.json NEW: add preset of X1 0.2mm nozzle 2022-10-09 10:37:45 +08:00
Generic ASA @base.json ENH: add filament configure of 0.2 nozzle 2022-09-02 12:52:18 +08:00
Generic ASA.json NEW: add preset of 0.6 & 0.8 X1C 2022-09-02 12:52:18 +08:00
Generic PA-CF.json ENH: modify generic pa-cf cooling setting 2022-12-15 04:38:15 -05:00
Generic PA.json ENH: increase the temp of some plate to improve the print result 2022-12-15 04:33:48 -05:00
Generic PC @0.2 nozzle.json NEW: add preset of X1 0.2mm nozzle 2022-10-09 10:37:45 +08:00
Generic PC @base.json ENH: add filament configure of 0.2 nozzle 2022-09-02 12:52:18 +08:00
Generic PC.json ENH: increase the temp of some plate to improve the print result 2022-12-15 04:33:48 -05:00
Generic PETG @0.2 nozzle.json ENH: increase the temp of some plate to improve the print result 2022-12-15 04:33:48 -05:00
Generic PETG @base.json ENH: increase the temp of some plate to improve the print result 2022-12-15 04:33:48 -05:00
Generic PETG.json NEW: add preset of 0.6 & 0.8 X1C 2022-09-02 12:52:18 +08:00
Generic PLA @0.2 nozzle.json NEW: add preset of X1 0.2mm nozzle 2022-10-09 10:37:45 +08:00
Generic PLA @base.json ENH: revise the filament preset. 2022-09-02 13:16:54 +08:00
Generic PLA Silk.json ENH: add generic PLA silk 2022-12-15 04:33:48 -05:00
Generic PLA-CF @base.json ENH: align the parameter 2022-12-15 04:38:15 -05:00
Generic PLA-CF.json ENH: align the parameter 2022-12-15 04:38:15 -05:00
Generic PLA.json NEW: add preset of 0.6 & 0.8 X1C 2022-09-02 12:52:18 +08:00
Generic PVA @0.2 nozzle.json NEW: add preset of 0.2 nozzle X1 2022-09-08 21:49:36 +08:00
Generic PVA @base.json NEW: add preset of 0.2 nozzle X1 2022-09-08 21:49:36 +08:00
Generic PVA.json NEW: add nozzle_hrc and filament required hrc 2022-12-15 04:33:48 -05:00
Generic TPU.json ENH: align the parameter 2022-12-15 04:38:15 -05:00
PolyLite PLA @base.json ENH: sync filament_id with RFID 2022-08-05 16:11:42 +08:00
PolyLite PLA @BBL X1.json ENH: align the parameter 2022-12-15 04:38:15 -05:00
PolyLite PLA @BBL X1C 0.2 nozzle.json ENH: align the parameter 2022-12-15 04:38:15 -05:00
PolyLite PLA @BBL X1C.json ENH: modify the preset of some filaments 2022-09-29 11:16:43 +08:00
PolyTerra PLA @base.json ENH: sync filament_id with RFID 2022-08-05 16:11:42 +08:00
PolyTerra PLA @BBL X1.json ENH: align the parameter 2022-12-15 04:38:15 -05:00
PolyTerra PLA @BBL X1C 0.2 nozzle.json NEW: add preset of X1 0.2mm nozzle 2022-10-09 10:37:45 +08:00
PolyTerra PLA @BBL X1C.json ENH: modify the preset of some filaments 2022-09-29 11:16:43 +08:00