Bambu pa-cf has been modified, generic pa-cf
should be changed as well
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ie859b41bd4d138a5fab204d6ad6a79806c3f0a9b
For PA-cf material, forcing cooling for all outer
wall and using lower fan speed for infill and inner
wall can get more high strength.
Add this cooling strategy.
When set overhang fan threshold to be 0%, then bridge
and all outer wall will be force to cool with
the overhang fan speed.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ideed1ac8690f1eeb68aad760678db76bb4dae8ec
hrc determine which filament could be printed by the nozzle
if the filament required hrc smaller than the nozzle hrc
the fillament could be printed
either of it be zero means use other printers
or user want to print it anyway
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ic32dfaed4f9c80774a670c362de612254f3a5ed0
Requirement from user to set filament_start_gcode
and filament_end_gcode. Set these two settings to
advanced mode
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I0d8ddb394b37614d0ef0f10f8434553cb20e9ffd
Make filament_id to be same with information
from nectarine
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I3012d74bb8fe849fbaf9fabab791a6b06335dcf6
The extruder offset of X1 and X1C is (0,2).
All generated gcode should minus this value.
Also change the min speed of cooling buffer for
better cooling for small area(from pineapple)
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I06e58a26f8736ae24fa9da02477a9d19114daeca
Filament type of Bambu PA-CF in RFID is PA-CF.
Change it to PA-CF as well in preset to avoid
failure of AMS mapping.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ic6b6269123d59863fea2b7d262a124468c95b8af
1 change bambu PC and TPU temperature by pineapple
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Id2bc603893ce9e2c33f15de420c79b94cd6dd89a
1. first formal version of macos
2. add the bambu networking plugin install logic
3. auto compute the wipe volume when filament change
4. add the logic of wiping into support
5. refine the GUI layout and icons, improve the gui apperance in lots of
small places
6. serveral improve to support
7. support AMS auto-mapping
8. disable lots of unstable features: such as params table, media file download, HMS
9. fix serveral kinds of bugs
10. update the document of building
11. ...
