8ccf0edbc2
* creating settings for printer and some UI changes work * related filament diameter and pellet flow changes to each other * UI name change to turn Filament to Material * updated the flow coefficient to filament diameter formula * updated the preset for the configuration wizard * configuration changes for the final release * config changes and preset bundle sync removed * start gcode change for ginger machines * added explanation of relationship between pellet_flow_coefficient and filament_diameter * Added tooltip. Fixed Ginger machine configuration, Added docs
23 lines
1.3 KiB
Markdown
23 lines
1.3 KiB
Markdown
Large format printers with print volumes in the order of 1m^3 generally use pellets for printing.
|
|
The overall tech is very similar to FDM printing.
|
|
It is FDM printing, but instead of filaments, it uses pellets.
|
|
|
|
The difference here is that where filaments have a filament_diameter that is used to calculate
|
|
the volume of filament ingested, pellets have a particular flow_coefficient that is empirically
|
|
devised for that particular pellet.
|
|
|
|
pellet_flow_coefficient is basically a measure of the packing density of a particular pellet.
|
|
Shape, material and density of an individual pellet will determine the packing density and
|
|
the only thing that matters for 3d printing is how much of that pellet material is extruded by
|
|
one turn of whatever feeding mehcanism/gear your printer uses. You can emperically derive that
|
|
for your own pellets for a particular printer model.
|
|
|
|
We are translating the pellet_flow_coefficient into filament_diameter so that everything works just like it
|
|
does already with very minor adjustments.
|
|
|
|
filament_diameter = sqrt( (4 \* pellet_flow_coefficient) / PI )
|
|
|
|
sqrt just makes the relationship between flow_coefficient and volume linear.
|
|
|
|
higher packing density -> more material extruded by single turn -> higher pellet_flow_coefficient -> treated as if a filament of larger diameter is being used
|
|
All other calculations remain the same for slicing.
|