1. It seems there are a lot of buffered frames in IP CAM. Have to
wait enough time untill all buffers are flushed.
2. From watermellon's suggestion, increase travel speed duing layer
change, to save time and reduce oozing.
JIRA: STUDIO-2167
Change-Id: Ia2ec0bde216e90207897c00c395f7e02ea2fe342
(cherry picked from commit 9c85a7c68617b1628e1698912da20f1ebc69ec16)
* Update BambuStudio_fr.po
French translation
* Update BambuStudio_fr.po
New modifications
* Update BambuStudio_fr.po
Test to add Layer time ( missing in the original po file)
* Update French
Change some French initial translation like A-coup in Saccade
* Update BambuStudio_fr.po
Add Jerk(XY)
* Update BambuStudio_fr.po
last modification for today
* Update BambuStudio_fr.po
Last French translation of the Morning
Mainly on the Giszmo
* Update BambuStudio_fr.po
Mainly on Filament parameter
* Update BambuStudio_fr.po
Adjust translation with :
https://github.com/BastR/BambuStudio/blob/french-trad/bbl/i18n/fr/BambuStudio_fr.po
* Update BambuStudio.mo
* last modif
Last modif for today
* Update fr
an other one
* Update
Last Modification
* Update
Missing term in the German translation
* update
Changement
* update
TimeLaps
* Update 11/1/2023
Minor Change
Update : Year / Month ( not translated in the previous translation)
* Update French Translation
Update for BambuStudio-SoftFever_V1.4.2
* Change some typro
Update some Typo
* Fix some Typo
Fix somme Typo and Label not presnet in the pot file
* Add Calibration SoftFever
Add missing Label on the SoftFever Calibration Menu
* Update BambuStudio_fr.po
Erreur Taper: -> Type:
* Update text.js
Add French Translation for Web interface
* Add Manual Web text
Translate French Manual Web text
* Update text.js
Back to "en"
It's not necessary to pause before photo-shooting, but after it.
Pausng by 50ms should be enough.
Jira: STUDIO-2167
Change-Id: I88ba5db1d6cce390ae5e26ac03533b0ee277b5bd
(cherry picked from commit ae34c0b9e875d1e52798a5359b0cce2151942fb8)
move to the middle upper edge of plate and ratract after calibrating to avoid leakage
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Idb09aaafee3bfccfd7c14d1140778498195b98c3
JIRA: [STUDIO-2226]
0.4mm nozzle contains different layer heights but has
the same preset threshold angle (30 degree) which is not reasonable.
Hereby, five of them are adjusted based on the overlap ratio.
Change-Id: I96300bf202c3a5fc4428186875a9212c32524ff2
Change-Id: I6a3b2a67d2950e2c1c5267bb7c65d5594924caec
Signed-off-by: Stone Li <stone.li@bambulab.com>
(cherry picked from commit 176e505bcf5f48971302d9aff14e74b118eeafbe)
* Changes:
Improve precise wall
Port PS2.6 overhang slowdown feature
Implement overhang fan for new overhang slowdown algo
Add option to switch between classic/new overhang slowdown implementation
Set Arachne as default engine
Small adjustment of temp calibration range
turn off small perimeter by default
Small UI tweaks
Change default top_surface_pattern to monotonic
Fine tune jerk
Signed-off-by: SoftFever <softfeverever@gmail.com>
* Disable optimizations for RelWithDebInfo
Signed-off-by: SoftFever <softfeverever@gmail.com>
* fix an issue that max volumetirc/vfa calibration can't send to print
Signed-off-by: SoftFever <softfeverever@gmail.com>
#322
* fix build errors
Signed-off-by: SoftFever <softfeverever@gmail.com>
---------
Signed-off-by: SoftFever <softfeverever@gmail.com>
* Add files via upload
First working version of TwoTrees SP-5 running klipper. this can be the base to start using this slicer. most of the generic materials are OOTB ones and this profile is made for near stock printers just running klipper. roughtly running a max speed of 200mm/s and runs successfully
* Add files via upload
* Delete SP-5.png
fix the text errot of density of PolyTerra
z_hop_type change to auto
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I7f59d2620b42d2f2092ebb4c01ac3a5455c40a4f
1 extrude move to dustbin
2 max vol of TPU 95A of X1 to 3.6
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I0b9d2a1db9c57c58255f95aad8a77772317a3ec9
1. display factor of extrusion calibration
2. add progress to calibration extrusion
3. support ext spool
Change-Id: Ic124a0097f16e6287c09f5f133eea84eeefb4000
Signed-off-by: Stone Li <stone.li@bambulab.com>
Start gcode of P1P is wrong.
This is for github issue #1044
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Id078b7c9020ef773373c3486f74dc51385b9dcc0
1. add gcode command for void printing detection
2. fix the issue that the toolhead is not at excess chute position when
smooth timelapse ends, by adding 2s pause after M991 command.
Jira: STUDIO-1996
Change-Id: I40cf16116e742744cea9bd90969e556a9ea2b2f1
(cherry picked from commit 2fbf7ffe6b1bd8850a76e229ff91750c689721b9)
* fix typo and tooltip
* merge pot po german
* fix more
* merge with bambu master pot
* fix po to Softfever
* fix
* build new Softfever pot mege with xx.po
* enable hints in german again
* fix more colors
* fix more color on Mac
Signed-off-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
* fix new windows issue on Mac
Signed-off-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
#137
* Support more PrusaSlicer variables
Signed-off-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
* enhance compatibility: bed_shape and wipe_start_x
* fix more color
* build deps
* only build for PR
Signed-off-by: SoftFever <softfeverever@gmail.com>
Signed-off-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
Signed-off-by: SoftFever <softfeverever@gmail.com>
* Update BambuStudio_fr.po
French translation
* Update BambuStudio_fr.po
New modifications
* Update BambuStudio_fr.po
Test to add Layer time ( missing in the original po file)
* Update French
Change some French initial translation like A-coup in Saccade
* Update BambuStudio_fr.po
Add Jerk(XY)
* Update BambuStudio_fr.po
last modification for today
* Update BambuStudio_fr.po
Last French translation of the Morning
Mainly on the Giszmo
* Update BambuStudio_fr.po
Mainly on Filament parameter
* Update BambuStudio_fr.po
Adjust translation with :
https://github.com/BastR/BambuStudio/blob/french-trad/bbl/i18n/fr/BambuStudio_fr.po
* Update BambuStudio.mo
* last modif
Last modif for today
* Update fr
an other one
* Update
Last Modification
* Update
Missing term in the German translation
* update
Changement
* update
TimeLaps
* Update 11/1/2023
Minor Change
Update : Year / Month ( not translated in the previous translation)
* Update BambuStudio_fr.po
French translation
* Update BambuStudio_fr.po
New modifications
* Update BambuStudio_fr.po
Test to add Layer time ( missing in the original po file)
* Update French
Change some French initial translation like A-coup in Saccade
* Update BambuStudio_fr.po
Add Jerk(XY)
* Update BambuStudio_fr.po
last modification for today
* Update BambuStudio_fr.po
Last French translation of the Morning
Mainly on the Giszmo
* Update BambuStudio_fr.po
Mainly on Filament parameter
* Update BambuStudio_fr.po
Adjust translation with :
https://github.com/BastR/BambuStudio/blob/french-trad/bbl/i18n/fr/BambuStudio_fr.po
* Update BambuStudio.mo
* last modif
Last modif for today
* Update fr
an other one
* ADD RatRig V-Core 500 Printer Profile
* ADD Other RatRig Printers
ADD V-Core 200/300/400
ADD V-Minion
* Add Printers to Filament
* Update Ratrig.json
* V-Minion correct PNG
* Correct Bed File for Printers
* Update fdm_process_ratrig_common.json
* Filament Settings Update/ Disable Z-Hop /Activate PA with Parameter
* Remove Bed Modell
The bed model was removed due to a known z bug
auto select grid infill for tree hybrid, and set default wall count to
1.
Change-Id: Icbecd540d06f353da2e63533f8f7cf7d7f20fbdb
(cherry picked from commit 246335cc195c88a4101dddd1eeda42d9ca16589f)
1. change base pattern "None" to "Hollow", and add an icon image
2. fix a bug of not initializing m_highest_overhang_layer
3. fix a bug where normal(auto) with Tree* styles won't generate any
supports.
4. add popup message when selecting support material for interface.
5. draw connected loops when wall count is larger than 1
Change-Id: I7ea211d2971b25c65724bb10d0f6cf6e0b68c6a1
(cherry picked from commit 4c1ae7f937239fc3e1397ec2cb3b290d886bb0f0)
1. In auto arranging bed temp can be higher than vitrify temp by no more than 15 degrees.
2. In by-object printing we use max radius for clearance
3. Add P1P max radius
Change-Id: If595f3e19fd74f6f36d2f394edbb835c413cc800
(cherry picked from commit 2af42420ad3770f0728adb583082600544519a58)
1. Add a new style "Tree Slim". If enabled, tree
support branches are merged more aggressively, and the support volume
is minimized.
2. Enable support style, add back Snug for normal support.
3. Remove hybrid(auto) type and use "Tree Hybrid" style to represent it.
4. Fix a bug in plan_layer_heights that may generate empty layers when
layer height is set to 0.3mm.
5. Fix a bug where no raft is generated if there is no overhang.
6. Fix the bug where no bottom interface or bottom gap is generated when
tree slim is selected.
7. Use physical distance to calc radius
Change-Id: Iacd57018ae5496cdc9acd28551c44d1c88c53fe0
Change infill density from 20% to 15% to reduce warp risk for large
objects.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I48d616b2f07ee93784d12c7d84b83fdb451e5cc1
