Change-Id: I48f34039635803c3f1cee4cc2c853a0ffa5b451a
Signed-off-by: Stone Li <stone.li@bambulab.com>
(cherry picked from commit 387ba2a5aac05d3b3af0923f88415188ae8cb44e)
Signed-off-by: Stone Li <stone.li@bambulab.com>
- Replace COPY command with Docker compatible syntax
- Rename container tag to bambu-studio-builder so as to not confuse with a container that would actually run Bambu Studio
- Add Docker alternative build method (thx @SG-R)
- Update podman syntax to remove unnecessary sudo
When using Bambu Studio with a dark themed Linux desktop, many of the dialogs appear as white text on a white background (font's correctly invert, but dialogs remain white).
@sigxcpu76 provided a workaround for this in #12 which is to tell the app to use a light GTK theme. This change incorporates that workaround into the AppImage making the app more usable until such time as proper dark theme support can be added to Bambu Studio.
This reverts commit ccf1746530a6f68d38a9b6714e70a0acdbec5b8c.
Reason for revert: multi color printing has problem
Change-Id: Ibc53b99a715b987ee447d7c3b03407de2790abaf
Change-Id: I33794d1f7354f369e76b83e90c8a03d2c349b545
Signed-off-by: Stone Li <stone.li@bambulab.com>
(cherry picked from commit a5edb419b49b18e7fa94b05d14aa215ed756076c)
1. only turn on label while switch from by_layer to by_object
2. don't crash when filament_colours mismatch between project_config and PresetBundle
Change-Id: Icac9d0d7f88e17fcad3b042ea19cda3ac23ae62c
Also change words for extruder clearance parameters.
Change-Id: I736fd9049d184c140b33078d78f764b4fe172765
(cherry picked from commit e70c0c0ea133cffa5788efbfc9633332b196e8df)
Towline may be even lower than the upper rod. Let's
take away 10mm tolerance.
Change-Id: I13972fc4ecb0671e1af4b2c6d102e319417e532f
(cherry picked from commit cedcb862556c8c9014a91ef2aad8f39fc118d925)
1. use strict ordering to ensure the printing order is right
2. reduce height-to-lid to 100mm considering towline is lower than lid
and may collid with objects
TODO: printing brim may still collide, need to subtract inflated boundary of
others during brim generation
Change-Id: Icf0cba10c579d28fabd97764c1b3abec267ebd9b
(cherry picked from commit 46c6f5ff94488b2f4481bf1d34555f4a7c45e135)
This may cause tall objects be printed before short ones. There are two
possible solutions:
1. do strict ordering only when y-overlap is large enough (the one
chosen in this commit)
2. when considering vertical collision with rod, the actual expansion
can be much smaller (because the rod is only slightly off extruder).
But this solution requires an extra parameter. Let's hold it for a
while.
Change-Id: Icc9a4796d49dad93cbcc20d4103e641a48886e5e
(cherry picked from commit 6a958b1fa9e58e4ca3be63b4918da77bcdc53314)
(cherry picked from commit ceff67789c27ea576afd663a2e5bae9a10241728)
1. Previous logic can't guarantee left-to-right printing order, so
toolhead may crash on the right side. In the new algorithm printing
order is guaranteed.
2. Clearance radius should be the max of 3 directions (left, bottom,
up), not including right, otherwise collision may happen on bottom or
up directions.
3. Add is_extrusion_cali_object property to handle extrusion brim
overlap better.
Change-Id: I44868b9925d983f5cca0c31d35dfa28d895fadbf
