amd/orcaslicer
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions 1
2755 commits 1 branch 0 tags 820 MiB
Commit graph

2755 commits

This branch
This branch
All branches
Author SHA1 Message Date
qing.zhang
97179d1378 ENH: arachne + overhang slow down 
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ic015c1c6d369edabaa1195416942881c0756f839
 2023-04-17 15:39:02 +08:00
zhimin.zeng
ad80943c69 FIX: delete unnecessary travel of wipe tower 
STUDIO-2203

Change-Id: Ic55030a09f66a789245f80096e8f3ffea73a904f
 2023-04-17 15:39:02 +08:00
lane.wei
cf6077fe7d FIX: CLI: fix the no-check not work issue 
1. no-check not work
2. refine the progress updating logic

Change-Id: I8acf18d8ab8958310fa3375de50cc9692b3408c1
 2023-04-17 15:39:02 +08:00
Arthur
15ba872d1c ENH: only draw infill in normal nodes of hybrid support 
1. Only draw infill in normal nodes of hybrid support.
  Previously when hybrid support was selected, all nodes would have
  infill including the circle nodes which don't need infill. Now we draw
  infill only when there are normal nodes.
2. Move remove_bridge after small overhang removal because the trimmed
  bridge may be detected as small overhangs.
3. Only split circle nodes in draw_circles to prevent floating circles.
4. Fix the issue where tree support infills may not be aligned,
   which is caused by the changing spacing of filler.
5. Fix a bug where lightning infill in tree support may crash.
   Note: it is still not prepared to set lightning infill as default,
   as for some models the generation time of lightning infill is still
   too long.

Change-Id: I556e5097041d09afae1e2957d4dc9914d4610149
(cherry picked from commit 4c0849a81b60cde0c3b8ca54f03f63ea7c62dcd9)
 2023-04-17 15:39:02 +08:00
zhimin.zeng
e6e0085dcc FIX: the volume position is not correct(3mf from solidwork) 
Change-Id: I69fe3f9896214da502b60bc23deee6525599677e
 2023-04-17 15:39:02 +08:00
zhimin.zeng
abf12366e7 FIX: Problems due to precision errors. STUDIO-2051 
Change-Id: I8005f2879b33408df44c476e4297928ca0c52ed9
(cherry picked from commit e789ddd050ee69404a9f6a88686eeed0880da00f)
 2023-04-17 15:39:02 +08:00
Stone Li
82ee622ce3 ENH: avoid to crash log when parsing sequence_id 
Change-Id: I14ff7167cf4291a09d955d1ac295197470734546
 2023-04-17 15:39:02 +08:00
Stone Li
9606a04117 NEW: support clean print error 
Change-Id: I0d0b6b5dae22bf5ee793d748d3afb5d45fbf744a
 2023-04-17 15:39:02 +08:00
Stone Li
8675815fb3 ENH: do not use_open_ssl for engineer machine 
Change-Id: Ie4b8384324c25f9f402aa78b19e1140492dbef19
Signed-off-by: Stone Li <stone.li@bambulab.com>
 2023-04-17 15:39:02 +08:00
tao wang
6175446aaf NEW:support for importing models from browser to Studio on mac 
Change-Id: Ia4c39b3de1705d66a00442d11bd15a61ebc349ff
 2023-04-17 15:39:02 +08:00
Arthur
cf556814ce ENH: translate missing entries 
Jira: STUDIO-2577, STUDIO-2581，STUDIO-2582，STUDIO-2585

Change-Id: I560635756f7d0a9b27e4827920fe84c724d09f01
 2023-04-17 15:39:02 +08:00
Stone Li
4a99304c4f ENH: update version to 01.05.04.xx 
Change-Id: Ia53270bab7171376883cb01d158f0e0d6bdfc875
 2023-04-17 15:39:02 +08:00
lane.wei
7595775ba5 ENH: update: remove the old cached ota files in some corner case 
Change-Id: I8039e21045d33827dae096b18feead6150981056
(cherry picked from commit d920b3a57c284422e09c952b103c5f26ae551d2a)
 2023-04-17 15:39:02 +08:00
lane.wei
59a7cd3ef9 ENH: thumbnail: improve the effect of thumbnail 
1. adjust the background color
2. add a bit more emission factor
3. adjust the thumbnail rendering size in preview
4. change the font to white of thumbnail preview

Change-Id: Ifbcac94383608054759a7a31ec357233c7fb57a9
(cherry picked from commit ac577934f11edd56069584d1450734df59e17989)
 2023-04-17 15:39:02 +08:00
chunmao.guo
4b5fa4fe58 FIX: param full field with for multiline option 
Change-Id: I8dd53e461645810e6db3e17b75e3e7c4a0c1e01d
 2023-04-17 15:39:02 +08:00
chunmao.guo
04d24fbb2f FIX: [STUDIO-2575] crash report invalid uft8 char 
Change-Id: I7fd5290774d3d54efdee65bfe1191a932e252f87
 2023-04-17 15:39:02 +08:00
tao wang
ee2ef44dc7 NEW:ams control support for more gradient colors 
Change-Id: I3e7e7e1f340a443200b9225b142f6398b4824513
 2023-04-17 15:39:02 +08:00
tao wang
e3d89f2154 FIX:fixed ams cannot displayed when amsid does not start from 0 
Change-Id: I2beee54bc99ced5faf9ea58e6ff3f5aaa3504a64
 2023-04-17 15:39:02 +08:00
tao wang
27f4c282f2 ENH:add new prohibited materials 
Change-Id: I621aaf9ceabe11dbedd4e77376f10650be453abf
 2023-04-17 15:39:02 +08:00
Arthur
6facd65530 FIX: sharp tail detection in normal support was wrong 
1. Fix sharp tail detection in normal support.
The not operator in front of overlaps was missing.
2. Fix bridge removal.
After adopting Prusa's smart bridge direction detection, the bridge
angle may be pi, so our previous method (comparing angle to 0 and pi/2)
was not right. Now we simply check if the bridge direction normal vector
is aligned to x-axis or y-axis.

Change-Id: I4e1fd937e432aca97cdd374ba66a0d869794126e
(cherry picked from commit c0d82003a5e4c44345219294072c54051fc5711a)
 2023-04-17 15:39:02 +08:00
chunmao.guo
0ca3f27c54 ENH: [STUDIO-2550] config auto sync system presets 
Change-Id: I83f9baae5793b214f4d1c040f5819ad9a03cd47f
(cherry picked from commit 40fe90e176fc001f54b22375ddb0dd035a6d84cd)
 2023-04-17 15:39:02 +08:00
liz.li
d776c7595e ENH: enable gcode window and support viewing added custom gcode 
Change-Id: I2def8c32c17b6f2edfd2e6d0776123127560f167
 2023-04-17 15:39:02 +08:00
lane.wei
e2f96590cf ENH: CLI: add normative_check logic 
Change-Id: I7a02fefb2a161b27a35ad73102d8c57dbffa7c6b
(cherry picked from commit 3de468b341e95336611ff527453160131ec04b65)
 2023-04-17 15:39:02 +08:00
salt.wei
e2d6ed99d1 ENH: add post_process back 
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I05fc655080f3888255297d689552de84a81ed849
 2023-04-17 15:39:02 +08:00
chunmao.guo
8c39fbaf22 ENH: [STUDIO-2549] remember my choice on unsaved project/presets 
Change-Id: Ib9fc9074075bfce19f9a02be3aff7b3d04e3802a
 2023-04-17 15:39:02 +08:00
chunmao.guo
778761908a ENH: [STUDIO-2548] maximum recent project count 
Change-Id: Iba9c9959089ff1cb9dfdba717fe62b99375da137
 2023-04-17 15:39:02 +08:00
Arthur
0c2ba2b0a2 ENH: improve sharp detection for small regions 
1. improve sharp detection for small regions.
   When the region is around 1 extrsion width, previous method may miss some sharp tails.
Now we reduce the width threshold to 0.1*extrusion_width for sharp
tails.
   When checking "nothing below", need to expand the poly a little. Example:
benchy.
2. improve is_support_necessary.
   Only popup warning for sharp tail and large cantilever (longer than 6mm).

Jira: STUDIO-2567
Change-Id: I5e977e7766b35409891d1b41e36278e3f07fa372
(cherry picked from commit c9d8a7c1c3bbd4367c7fc44408c67e5c534167f4)
 2023-04-17 15:39:02 +08:00
salt.wei
6ddcc14577 ENH: support fuzzy all wall lines 
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: If6754b6a958203459882a125048e01b347e0a4db
 2023-04-17 15:39:02 +08:00
chunmao.guo
6ee93d5646 FIX: [STUDIO-2447] ImageGroid: clear scroll offset on list changed 
Change-Id: I8c2b2bfed096e99e2223ff109e5d70ea2bc3a82a
 2023-04-17 15:39:02 +08:00
chunmao.guo
84580f6f94 NEW: [STUDIO-2476] design_staffpick 
Change-Id: Ibe4d540ca31882e199437dc2811925e1a40680ec
 2023-04-17 15:39:02 +08:00
tao wang
20ad3c7f9a ENH:add some Chinese translations 
Change-Id: I610c23cbe36fb8f66c8a69e53330ec941174f12e
 2023-04-17 15:39:02 +08:00
manch1n
d72b4c1bfe FIX: Disable print button when gcode has conflict 
Also fix a crash bug due to setStarted and setDone.

Change-Id: Ib9b069fe4b7e5d1fc359f48e44b4032dd8249428
(cherry picked from commit 9ef190ed3ecd66d12617ad96e927ff34251395a2)
 2023-04-17 15:39:02 +08:00
zhimin.zeng
e002885efc FIX: modify the style and layout for cut 
Change-Id: Id9f84fc58385ae408a4c28c0d4eb63e48335039e
 2023-04-17 15:39:02 +08:00
liz.li
9b47255bc1 ENH:adjust assembly view toolbar UI (STUDIO-1213) 
https://jira.bambooolab.com/browse/STUDIO-1213

Change-Id: I3b17b37a229348d347f56d0672f2c258fbeb91e1
 2023-04-17 15:39:02 +08:00
tao wang
ffc4e7080c FIX:fixed translation does not take effect 
Change-Id: I83e2f2d53cdb4ded7cfa4176146b29920d21dcc8
 2023-04-17 15:39:02 +08:00
liz.li
907741e7e4 FIX: AboutDialog layout 
Change-Id: I693f489ba92f3d4ac60abb4344063b88fb201c29
 2023-04-17 15:39:02 +08:00
zhimin.zeng
b746877d70 FIX: modify the shader load error for mac 
Change-Id: I3e2b282b145b4d87e09c22d4fec1b88537212d60
 2023-04-17 15:39:02 +08:00
chunmao.guo
9558ed242c FIX: backup switch take effect 
Change-Id: Ie9740d7f985ae6adc2778eaac0a80cf7a94c98c4
 2023-04-17 15:39:02 +08:00
chunmao.guo
bda92795bb FIX: [STUDIO-1033] rm webview script handler on webview destory 
Change-Id: I2e9390dfaad46da9e158a43026ef872aaf88d589
 2023-04-17 15:39:02 +08:00
chunmao.guo
2a1f8af62e FIX: [STUDIO-2547] import config yes/no to all 
Change-Id: Ib5812c4af3d9fcbe45fe1d884a8bcf29d2f4f704
 2023-04-17 15:39:02 +08:00
MusangKing
ee6bf4d4de NEW: Allow Top/Bottom_z_distance under variable layer height 
Allow user to set top/Bottom_z_distance under variable layer height.

Fix the bug STUDIO-2454

Change-Id: I026098a4df7cfa01f87a6802e2c787fcfd6df3ee
(cherry picked from commit 6e933acec7cde705f176937038ce307bc276cf5f)
 2023-04-17 15:39:02 +08:00
MusangKing
355dd8d463 ENH: Re-open pattern angle option under Support/Advanced 
Re-open this option as requested by github users.

Fix Jira STUDIO-2083; Github issue-1102

Change-Id: Ifb01a5153e7dc105bf2d29a98e64dda3a9d8e6d4
(cherry picked from commit e42914b2448c2693d19d40b0d84e64567b766f37)
 2023-04-17 15:39:02 +08:00
Arthur
af0fca211b ENH: add grid & rectilinear_interlaced interface pattern 
Github: #1018, #1221
Jira: STUDIO-2534

Change-Id: I8c766b5b934364253c0344e39f474e4ac3b81add
(cherry picked from commit e7d46fe60856ab511905b46799943bfde8a71826)
 2023-04-17 15:39:02 +08:00
qing.zhang
9309831d26 ENH: update machine_start_gcode 
turn on HB fan before setting the nozzle temp

Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I55908465055dcd93d274c1d861715cf7b9cbe655
 2023-04-17 15:39:02 +08:00
zhimin.zeng
518cd4ce27 ENH: recover CutToParts for cut 
Change-Id: I5d7fb089c5d2ea9d36fce3d70ec4da896d601940
(cherry picked from commit e0232b21ebf5a37bedee1c213d1c21890634c563)
 2023-04-17 15:39:02 +08:00
zhimin.zeng
b1041a5de8 FIX: Cutting a sphere, the parts need repaired 
STUDIO-1192 & STUDIO-2505

Change-Id: I2ad1d1ef7c279a7307654ba453a0d8323316904e
(cherry picked from commit cb6d9ed2074763b4f7f92e45219d942317adf402)
 2023-04-17 15:39:02 +08:00
zhimin.zeng
872a54303c FIX: generate a wipe tower when add filament 
STUDIO-2538

Change-Id: I8cca134eb9302b2ff30252ef36ed8c24c834b22c
(cherry picked from commit aeb5408c9eee844970bbef94e49978568c1de541)
 2023-04-17 15:39:02 +08:00
zhimin.zeng
8ebd6cfc9e FIX: the text gap is not correct. STUDIO-2518 
Change-Id: I27dc8b62962ebe1aa2b4d54e50d68cf173eecd54
 2023-04-17 15:39:02 +08:00
tao wang
bf08a0b2e2 FIX:fixed some ui issues 
Change-Id: I96f3e3ec56a07a7b5ca4723c92715df58e0baaf6
 2023-04-17 15:39:02 +08:00
tao wang
7142119f03 NEW:add symbolic description for units optionin preferences 
https://github.com/bambulab/BambuStudio/issues/1459

Change-Id: Ia16c1bb17378ec25a145dd0e7116df434b564e10
 2023-04-17 15:39:02 +08:00