orcaslicer/resources/profiles/Kingroon/machine/kingroon kp3s pro s1 0.4 nozzle.json

{
  "bbl_calib_mark_logo": "1",
  "type": "machine",
  "setting_id": "GM003",
  "name": "Kingroon KP3S PRO S1 0.4 nozzle",
  "instantiation": "true",
  "inherits": "fdm_machine_common",
  "printer_model": "Kingroon KP3S PRO S1",
  "default_print_profile": "0.20mm @Kingroon KP3S PRO S1 (0.4 nozzle)",
  "default_filament_profile": "Kingroon Generic PLA",
  "change_filament_gcode": "M600",
  "deretraction_speed": ["30"],
  "extruder_clearance_height_to_lid": "140",
  "extruder_clearance_height_to_rod": "36",
  "extruder_clearance_radius": "65",
  "extruder_colour": ["#FCE94F"],
  "extruder_offset": ["0x0"],
  "fan_kickstart": "0",
  "fan_speedup_overhangs": "1",
  "fan_speedup_time": "0",
  "from": "system",
  "gcode_flavor": "marlin",
  "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
  "machine_end_gcode": "G91; relative positioning G1 Z1.0 F3000 ; move z up little to prevent scratching of print G90; absolute positioning M104 S0; turn off extruder M140 S0 ; turn off bed G1 X0 Y175 F1000 ; prepare for part removal M84 ; disable motors M106 S0 ; turn off fan",
  "machine_load_filament_time": "0",
  "machine_max_acceleration_e": ["5000", "5000"],
  "machine_max_acceleration_extruding": ["1250", "20000"],
  "machine_max_acceleration_retracting": ["1250", "5000"],
  "machine_max_acceleration_travel": ["9000", "9000"],
  "machine_max_acceleration_x": ["3000", "20000"],
  "machine_max_acceleration_y": ["3000", "20000"],
  "machine_max_acceleration_z": ["200", "200"],
  "machine_max_jerk_e": ["4.5", "2.5"],
  "machine_max_jerk_x": ["12", "9"],
  "machine_max_jerk_y": ["12", "9"],
  "machine_max_jerk_z": ["0.4", "0.4"],
  "machine_max_speed_e": ["120", "25"],
  "machine_max_speed_x": ["200", "200"],
  "machine_max_speed_y": ["200", "200"],
  "machine_max_speed_z": ["12", "12"],
  "machine_min_extruding_rate": ["0", "0"],
  "machine_min_travel_rate": ["0", "0"],
  "machine_pause_gcode": "PAUSE",
  "machine_start_gcode": "M117 Purge extruder G92 E0 ; reset extruder G1 Z1.0 F3000 ; move z up little to prevent scratching of surface G1 X2 Y20 Z0.3 F5000.0 ; move to start-line position G1 X2 Y175.0 Z0.3 F1500.0 E15 ; draw 1st line G1 X2 Y175.0 Z0.4 F5000.0 ; move to side a little  G1 X2 Y20 Z0.4 F1500.0 E30 ; draw 2nd line  G92 E0 ; reset extruder  G1 Z1.0 F3000 ; move z up little to prevent scratching of surface",
  "machine_unload_filament_time": "0",
  "max_layer_height": ["0.3"],
  "min_layer_height": ["0.08"],
  "nozzle_diameter": ["0.4"],
  "nozzle_hrc": "0",
  "nozzle_type": "undefine",
  "nozzle_volume": "0",
  "print_host": "",
  "print_host_webui": "",
  "printable_area": ["0x0", "200x0", "200x200", "0x200"],
  "printable_height": "200",
  "printer_technology": "FFF",
  "printer_variant": "0.4",
  "printhost_apikey": "",
  "printhost_authorization_type": "key",
  "printhost_cafile": "",
  "printhost_password": "",
  "printhost_port": "",
  "printhost_ssl_ignore_revoke": "0",
  "printhost_user": "",
  "retract_before_wipe": ["70%"],
  "retract_length_toolchange": ["2"],
  "retract_restart_extra": ["0"],
  "retract_restart_extra_toolchange": ["0"],
  "retract_when_changing_layer": ["0"],
  "retraction_length": ["1.4"],
  "retraction_minimum_travel": ["1"],
  "retraction_speed": ["35"],
  "scan_first_layer": "0",
  "silent_mode": "0",
  "single_extruder_multi_material": "1",
  "template_custom_gcode": "",
  "thumbnails": ["300x300"],
  "upward_compatible_machine": [],
  "use_firmware_retraction": "0",
  "use_relative_e_distances": "1",
  "version": "1.6.0.0",
  "wipe": ["0"],
  "wipe_distance": ["2"],
  "z_hop": ["0.5"],
  "z_hop_types": ["Auto Lift"]
}