| .. |
|
P1P
|
ENH: add Bambu PET-CF & modify slow down layer time of Bambu PLA-CF
|
2023-03-09 19:07:29 +08:00 |
|
Bambu ABS @base.json
|
NEW: show cost of filament in GUI
|
2022-09-02 12:52:18 +08:00 |
|
Bambu ABS @BBL X1C 0.2 nozzle.json
|
NEW: add preset of 0.2 nozzle X1
|
2022-09-08 21:49:36 +08:00 |
|
Bambu ABS @BBL X1C 0.8 nozzle.json
|
NEW: add preset of 0.6 & 0.8 X1C
|
2022-09-02 12:52:18 +08:00 |
|
Bambu ABS @BBL X1C.json
|
NEW: add preset of 0.6 & 0.8 X1C
|
2022-09-02 12:52:18 +08:00 |
|
Bambu PA-CF @base.json
|
ENH: add metal PLA-CF & PAHT-CF
|
2022-12-26 05:31:54 -05:00 |
|
Bambu PA-CF @BBL X1C.json
|
ENH: support force cooling for outer wall only
|
2022-12-15 04:33:48 -05:00 |
|
Bambu PAHT-CF @base.json
|
ENH: add metal PLA-CF & PAHT-CF
|
2022-12-26 05:31:54 -05:00 |
|
Bambu PAHT-CF @BBL X1C.json
|
ENH: add metal PLA-CF & PAHT-CF
|
2022-12-26 05:31:54 -05:00 |
|
Bambu PC @base.json
|
ENH: modify the preset of some filaments
|
2022-09-29 11:16:43 +08:00 |
|
Bambu PC @BBL X1C 0.2 nozzle.json
|
NEW: add preset of 0.2 nozzle X1
|
2022-09-08 21:49:36 +08:00 |
|
Bambu PC @BBL X1C 0.6 nozzle.json
|
NEW: add preset of 0.6 & 0.8 X1C
|
2022-09-02 12:52:18 +08:00 |
|
Bambu PC @BBL X1C 0.8 nozzle.json
|
NEW: add preset of 0.6 & 0.8 X1C
|
2022-09-02 12:52:18 +08:00 |
|
Bambu PC @BBL X1C.json
|
ENH:add parameters of filaments
|
2022-08-26 09:25:59 +08:00 |
|
Bambu PET-CF @base.json
|
ENH: modify temperature_temp of PET-CF
|
2023-03-09 19:07:29 +08:00 |
|
Bambu PET-CF @BBL X1C.json
|
change default slow_down_min_speed to 10
|
2023-03-14 21:30:45 +08:00 |
|
Bambu PETG-CF @base.json
|
ENH: modify temperature_temp of PET-CF
|
2023-03-09 19:07:29 +08:00 |
|
Bambu PETG-CF @BBL X1C.json
|
ENH: add Bambu PETG-CF & change filament id of PLA Silk
|
2023-03-09 19:07:28 +08:00 |
|
Bambu PLA Basic @base.json
|
NEW: show cost of filament in GUI
|
2022-09-02 12:52:18 +08:00 |
|
Bambu PLA Basic @BBL X1.json
|
ENH: align the parameter
|
2022-12-15 04:38:15 -05:00 |
|
Bambu PLA Basic @BBL X1C 0.2 nozzle.json
|
NEW: add preset of 0.2 nozzle X1
|
2022-09-08 21:49:36 +08:00 |
|
Bambu PLA Basic @BBL X1C 0.8 nozzle.json
|
change default slow_down_min_speed to 10
|
2023-03-14 21:30:45 +08:00 |
|
Bambu PLA Basic @BBL X1C.json
|
Add the full source of BambuStudio
|
2022-07-15 23:42:08 +08:00 |
|
Bambu PLA Impact @base.json
|
Add the full source of BambuStudio
|
2022-07-15 23:42:08 +08:00 |
|
Bambu PLA Impact @BBL X1C.json
|
Add the full source of BambuStudio
|
2022-07-15 23:42:08 +08:00 |
|
Bambu PLA Marble @base.json
|
ENH: add some new filament
|
2023-02-01 16:24:44 +08:00 |
|
Bambu PLA Marble @BBL X1.json
|
ENH: add some new filament
|
2023-02-01 16:24:44 +08:00 |
|
Bambu PLA Marble @BBL X1C.json
|
ENH: add some new filament
|
2023-02-01 16:24:44 +08:00 |
|
Bambu PLA Matte @base.json
|
NEW: show cost of filament in GUI
|
2022-09-02 12:52:18 +08:00 |
|
Bambu PLA Matte @BBL X1.json
|
ENH: align the parameter
|
2022-12-15 04:38:15 -05:00 |
|
Bambu PLA Matte @BBL X1C 0.2 nozzle.json
|
NEW: add preset of 0.2 nozzle X1
|
2022-09-08 21:49:36 +08:00 |
|
Bambu PLA Matte @BBL X1C 0.8 nozzle.json
|
change default slow_down_min_speed to 10
|
2023-03-14 21:30:45 +08:00 |
|
Bambu PLA Matte @BBL X1C.json
|
Add the full source of BambuStudio
|
2022-07-15 23:42:08 +08:00 |
|
Bambu PLA Metal @base.json
|
ENH: add metal PLA-CF & PAHT-CF
|
2022-12-26 05:31:54 -05:00 |
|
Bambu PLA Metal @BBL X1.json
|
ENH: add metal PLA-CF & PAHT-CF
|
2022-12-26 05:31:54 -05:00 |
|
Bambu PLA Metal @BBL X1C 0.2 nozzle.json
|
ENH: add metal PLA-CF & PAHT-CF
|
2022-12-26 05:31:54 -05:00 |
|
Bambu PLA Metal @BBL X1C.json
|
ENH: add metal PLA-CF & PAHT-CF
|
2022-12-26 05:31:54 -05:00 |
|
Bambu PLA Sparkle @base.json
|
ENH: add some new filament
|
2023-02-01 16:24:44 +08:00 |
|
Bambu PLA Sparkle @BBL X1.json
|
ENH: add some new filament
|
2023-02-01 16:24:44 +08:00 |
|
Bambu PLA Sparkle @BBL X1C.json
|
ENH: add some new filament
|
2023-02-01 16:24:44 +08:00 |
|
Bambu PLA Tough @base.json
|
ENH: add some new filament
|
2023-02-01 16:24:44 +08:00 |
|
Bambu PLA Tough @BBL X1.json
|
ENH: add some new filament
|
2023-02-01 16:24:44 +08:00 |
|
Bambu PLA Tough @BBL X1C 0.2 nozzle.json
|
ENH: add some new filament
|
2023-02-01 16:24:44 +08:00 |
|
Bambu PLA Tough @BBL X1C.json
|
ENH: add some new filament
|
2023-02-01 16:24:44 +08:00 |
|
Bambu PLA-CF @base.json
|
ENH: add Bambu PET-CF & modify slow down layer time of Bambu PLA-CF
|
2023-03-09 19:07:29 +08:00 |
|
Bambu PLA-CF @BBL X1C 0.8 nozzle.json
|
ENH: add metal PLA-CF & PAHT-CF
|
2022-12-26 05:31:54 -05:00 |
|
Bambu PLA-CF @BBL X1C.json
|
ENH: add Bambu PET-CF & modify slow down layer time of Bambu PLA-CF
|
2023-03-09 19:07:29 +08:00 |
|
Bambu Support G @base.json
|
ENH: increase the temp of some plate to improve the print result
|
2022-12-15 04:33:48 -05:00 |
|
Bambu Support G @BBL X1C.json
|
NEW: add nozzle_hrc and filament required hrc
|
2022-12-15 04:33:48 -05:00 |
|
Bambu Support W @base.json
|
ENH: modify the preset of some filaments
|
2022-09-29 11:16:43 +08:00 |
|
Bambu Support W @BBL X1.json
|
ENH: align the parameter
|
2022-12-15 04:38:15 -05:00 |
|
Bambu Support W @BBL X1C 0.2 nozzle.json
|
ENH: align the parameter
|
2022-12-15 04:38:15 -05:00 |
|
Bambu Support W @BBL X1C.json
|
ENH:add parameters of filaments
|
2022-08-26 09:25:59 +08:00 |
|
Bambu TPU 95A @base.json
|
ENH: modify the preset of some filaments
|
2022-09-29 11:16:43 +08:00 |
|
Bambu TPU 95A @BBL X1.json
|
ENH: updare end gcode and max_vol of TPU 95A
|
2023-02-01 16:24:44 +08:00 |
|
Bambu TPU 95A @BBL X1C.json
|
ENH: revise the filament preset.
|
2022-09-02 13:16:54 +08:00 |
|
fdm_filament_abs.json
|
change default slow_down_min_speed to 10
|
2023-03-14 21:30:45 +08:00 |
|
fdm_filament_asa.json
|
change default slow_down_min_speed to 10
|
2023-03-14 21:30:45 +08:00 |
|
fdm_filament_common.json
|
ENH: support filament_z_hop_types
|
2023-02-22 20:09:17 +08:00 |
|
fdm_filament_pa.json
|
change default slow_down_min_speed to 10
|
2023-03-14 21:30:45 +08:00 |
|
fdm_filament_pc.json
|
change default slow_down_min_speed to 10
|
2023-03-14 21:30:45 +08:00 |
|
fdm_filament_pet.json
|
ENH: modify the start_code & virification temperature of PETG & TPU
|
2022-09-14 17:39:11 +08:00 |
|
fdm_filament_pla.json
|
change default slow_down_min_speed to 10
|
2023-03-14 21:30:45 +08:00 |
|
fdm_filament_pva.json
|
change default slow_down_min_speed to 10
|
2023-03-14 21:30:45 +08:00 |
|
fdm_filament_tpu.json
|
ENH: modify the start_code & virification temperature of PETG & TPU
|
2022-09-14 17:39:11 +08:00 |
|
Generic ABS @0.2 nozzle.json
|
NEW: add preset of X1 0.2mm nozzle
|
2022-10-09 10:37:45 +08:00 |
|
Generic ABS @base.json
|
ENH: add filament configure of 0.2 nozzle
|
2022-09-02 12:52:18 +08:00 |
|
Generic ABS.json
|
NEW: add preset of 0.6 & 0.8 X1C
|
2022-09-02 12:52:18 +08:00 |
|
Generic ASA @0.2 nozzle.json
|
NEW: add preset of X1 0.2mm nozzle
|
2022-10-09 10:37:45 +08:00 |
|
Generic ASA @base.json
|
ENH: add filament configure of 0.2 nozzle
|
2022-09-02 12:52:18 +08:00 |
|
Generic ASA.json
|
NEW: add preset of 0.6 & 0.8 X1C
|
2022-09-02 12:52:18 +08:00 |
|
Generic PA-CF.json
|
ENH: modify generic pa-cf cooling setting
|
2022-12-15 04:38:15 -05:00 |
|
Generic PA.json
|
ENH: increase the temp of some plate to improve the print result
|
2022-12-15 04:33:48 -05:00 |
|
Generic PC @0.2 nozzle.json
|
NEW: add preset of X1 0.2mm nozzle
|
2022-10-09 10:37:45 +08:00 |
|
Generic PC @base.json
|
ENH: add filament configure of 0.2 nozzle
|
2022-09-02 12:52:18 +08:00 |
|
Generic PC.json
|
ENH: increase the temp of some plate to improve the print result
|
2022-12-15 04:33:48 -05:00 |
|
Generic PETG @0.2 nozzle.json
|
ENH: add PETG-CF
|
2023-02-28 18:44:28 +08:00 |
|
Generic PETG @base.json
|
change default slow_down_min_speed to 10
|
2023-03-14 21:30:45 +08:00 |
|
Generic PETG-CF @base.json
|
ENH: modify temperature_temp of PET-CF
|
2023-03-09 19:07:29 +08:00 |
|
Generic PETG-CF @BBL X1C.json
|
ENH: add PETG-CF
|
2023-02-28 18:44:28 +08:00 |
|
Generic PETG.json
|
NEW: add preset of 0.6 & 0.8 X1C
|
2022-09-02 12:52:18 +08:00 |
|
Generic PLA @0.2 nozzle.json
|
NEW: add preset of X1 0.2mm nozzle
|
2022-10-09 10:37:45 +08:00 |
|
Generic PLA @base.json
|
ENH: revise the filament preset.
|
2022-09-02 13:16:54 +08:00 |
|
Generic PLA Silk @base.json
|
ENH: add Bambu PETG-CF & change filament id of PLA Silk
|
2023-03-09 19:07:28 +08:00 |
|
Generic PLA Silk.json
|
ENH: add Bambu PETG-CF & change filament id of PLA Silk
|
2023-03-09 19:07:28 +08:00 |
|
Generic PLA-CF @base.json
|
ENH: align the parameter
|
2022-12-15 04:38:15 -05:00 |
|
Generic PLA-CF.json
|
ENH: align the parameter
|
2022-12-15 04:38:15 -05:00 |
|
Generic PLA.json
|
NEW: add preset of 0.6 & 0.8 X1C
|
2022-09-02 12:52:18 +08:00 |
|
Generic PVA @0.2 nozzle.json
|
NEW: add preset of 0.2 nozzle X1
|
2022-09-08 21:49:36 +08:00 |
|
Generic PVA @base.json
|
change default slow_down_min_speed to 10
|
2023-03-14 21:30:45 +08:00 |
|
Generic PVA.json
|
NEW: add nozzle_hrc and filament required hrc
|
2022-12-15 04:33:48 -05:00 |
|
Generic TPU.json
|
ENH: align the parameter
|
2022-12-15 04:38:15 -05:00 |
|
PolyLite PLA @base.json
|
ENH: sync filament_id with RFID
|
2022-08-05 16:11:42 +08:00 |
|
PolyLite PLA @BBL X1.json
|
ENH: align the parameter
|
2022-12-15 04:38:15 -05:00 |
|
PolyLite PLA @BBL X1C 0.2 nozzle.json
|
ENH: align the parameter
|
2022-12-15 04:38:15 -05:00 |
|
PolyLite PLA @BBL X1C.json
|
ENH: modify the preset of some filaments
|
2022-09-29 11:16:43 +08:00 |
|
PolyTerra PLA @base.json
|
ENH: modify start gcode
|
2023-02-01 16:24:44 +08:00 |
|
PolyTerra PLA @BBL X1.json
|
ENH: align the parameter
|
2022-12-15 04:38:15 -05:00 |
|
PolyTerra PLA @BBL X1C 0.2 nozzle.json
|
NEW: add preset of X1 0.2mm nozzle
|
2022-10-09 10:37:45 +08:00 |
|
PolyTerra PLA @BBL X1C.json
|
ENH: modify the preset of some filaments
|
2022-09-29 11:16:43 +08:00 |
