orcaslicer/resources/profiles/Creality/machine/Creality Ender-3 V3 0.6 nozzle.json
Ruslan Kyba 2431429c49
Update Ender-3 V3 printer profiles (#5771)
* Update printer profiles

* Fix accelerations

* Fix z hop

* Small fixes

* Update layer height according to printer data sheet

---------

Co-authored-by: SoftFever <softfeverever@gmail.com>
2024-06-26 20:33:53 +08:00

137 lines
No EOL
2.9 KiB
JSON

{
"type": "machine",
"setting_id": "GM001",
"name": "Creality Ender-3 V3 0.6 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_creality_common",
"printer_model": "Creality Ender-3 V3",
"gcode_flavor": "klipper",
"printer_structure": "i3",
"default_print_profile": "0.30mm Standard @Creality Ender3 V3",
"nozzle_diameter": [
"0.6"
],
"printer_variant": "0.6",
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "1",
"support_air_filtration": "0",
"support_multi_bed_types": "1",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"6000",
"6000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"20000",
"20000"
],
"machine_max_acceleration_y": [
"5000",
"5000"
],
"machine_max_acceleration_z": [
"20000",
"20000"
],
"machine_max_speed_e": [
"100",
"100"
],
"machine_max_speed_x": [
"600",
"600"
],
"machine_max_speed_y": [
"600",
"600"
],
"machine_max_speed_z": [
"500",
"500"
],
"machine_max_jerk_e": [
"10",
"10"
],
"machine_max_jerk_x": [
"20",
"20"
],
"machine_max_jerk_y": [
"10",
"10"
],
"machine_max_jerk_z": [
"20",
"20"
],
"max_layer_height": [
"0.35"
],
"min_layer_height": [
"0.1"
],
"printer_settings_id": "Creality",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"70%"
],
"retraction_length": [
"0.6"
],
"retract_length_toolchange": [
"1"
],
"retraction_speed": [
"40"
],
"deretraction_speed": [
"40"
],
"extruder_clearance_height_to_lid": "250",
"extruder_clearance_height_to_rod": "14",
"extruder_clearance_radius": "70",
"z_hop": [
"0.2"
],
"z_hop_types": [
"Auto Lift"
],
"wipe_distance": [
"2"
],
"single_extruder_multi_material": "1",
"manual_filament_change": "1",
"change_filament_gcode": "PAUSE",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Creality Generic PLA @Ender-3V3-all"
],
"machine_start_gcode": "M140 S0\nM104 S0\nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
"machine_end_gcode": "END_PRINT",
"scan_first_layer": "0",
"thumbnails": [
"96x96/PNG, 300x300/PNG"
]
}