dae9d62be5
* Initial add of N4Plus profile Still some tuning to get it "right" but way better than nothing or just copying the Max profile. * Fixing machine_start and manual filament change Adding PRINT_START to the machine_start_gcode Adding manual_filament_change override to True since this printer doesn't have automatic filament change. * Adjusting accelerations and removing Z-Hop Bumping accelerations to stock levels for all sizes and removing Z-Hop by default. * Adding Z-Hop back in to be safe Getting more stringing with Z-hop on but also rubbing prints during some moves. * Removing print_start and lower accels a little PRINT_START is automatically called on this printer so removing it from machine start gcode Lowering accelerations a tiny bit. May bump it back up later but wanted a safer value.
26 lines
No EOL
789 B
JSON
26 lines
No EOL
789 B
JSON
{
|
|
"type": "process",
|
|
"setting_id": "GP004",
|
|
"name": "0.20mm Standard @Elegoo Neptune4 Plus (0.2 nozzle)",
|
|
"from": "system",
|
|
"inherits": "Generic @Elegoo Neptune4 Plus",
|
|
"instantiation": "true",
|
|
"layer_height": "0.2",
|
|
"bottom_shell_layers": "4",
|
|
"outer_wall_line_width": "0.2",
|
|
"line_width": "0.2",
|
|
"initial_layer_line_width": "0.22",
|
|
"sparse_infill_line_width": "0.25",
|
|
"inner_wall_line_width": "0.25",
|
|
"internal_solid_infill_line_width": "0.25",
|
|
"resolution": "0.012",
|
|
"support_top_z_distance": "0.2",
|
|
"support_line_width": "0.2",
|
|
"support_interface_spacing": "0.2",
|
|
"top_surface_line_width": "0.2",
|
|
"top_shell_layers": "5",
|
|
"top_shell_thickness": "0.8",
|
|
"compatible_printers": [
|
|
"Elegoo Neptune 4 Plus (0.2 nozzle)"
|
|
]
|
|
} |