0459c28596
1. Change default ensure_vertical_shell_thickness value back to ensure_all as suggested by @igiannakas 2. Change default sparse_infill_pattern vaule to ipCrossHatch
58 lines
1.9 KiB
JSON
58 lines
1.9 KiB
JSON
{
|
|
"type": "process",
|
|
"setting_id": "GP004",
|
|
"inherits": "fdm_process_common",
|
|
"name": "0.30mm Standard @Construct 1 XL",
|
|
"from": "system",
|
|
"instantiation": "true",
|
|
"bridge_speed": "60",
|
|
"default_acceleration": "4000",
|
|
"default_jerk": "13",
|
|
"enable_arc_fitting": "1",
|
|
"extra_perimeters_on_overhangs": "1",
|
|
"gap_infill_speed": "140",
|
|
"infill_jerk": "12",
|
|
"initial_layer_acceleration": "1400",
|
|
"initial_layer_infill_speed": "100",
|
|
"initial_layer_jerk": "8",
|
|
"initial_layer_line_width": "0.72",
|
|
"initial_layer_print_height": "0.32",
|
|
"initial_layer_speed": "80",
|
|
"inner_wall_acceleration": "3600",
|
|
"inner_wall_jerk": "10",
|
|
"inner_wall_line_width": "0.66",
|
|
"inner_wall_speed": "300",
|
|
"internal_solid_infill_line_width": "0.62",
|
|
"internal_solid_infill_speed": "300",
|
|
"is_custom_defined": "0",
|
|
"layer_height": "0.3",
|
|
"line_width": "0.64",
|
|
"only_one_wall_top": "1",
|
|
"outer_wall_acceleration": "2800",
|
|
"outer_wall_jerk": "8",
|
|
"outer_wall_line_width": "0.64",
|
|
"outer_wall_speed": "140",
|
|
"overhang_2_4_speed": "60",
|
|
"overhang_3_4_speed": "40",
|
|
"overhang_4_4_speed": "15",
|
|
"precise_outer_wall": "1",
|
|
"print_settings_id": "",
|
|
"skirt_loops": "1",
|
|
"slow_down_layers": "1",
|
|
"sparse_infill_density": "12%",
|
|
"sparse_infill_line_width": "0.64",
|
|
"sparse_infill_pattern": "crosshatch",
|
|
"sparse_infill_speed": "300",
|
|
"support_line_width": "0.6",
|
|
"support_speed": "300",
|
|
"top_surface_acceleration": "2400",
|
|
"top_surface_jerk": "8",
|
|
"top_surface_line_width": "0.66",
|
|
"top_surface_speed": "140",
|
|
"travel_acceleration": "6400",
|
|
"travel_speed": "320",
|
|
"wall_loops": "2",
|
|
"wall_sequence": "inner-outer-inner wall",
|
|
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
|
"compatible_printers": ["Construct 1 XL 0.6 nozzle"]
|
|
}
|