0369a14ab8
* added Prusa Mini with Input Shaper to profiles * refactoring to more reusable settings * added more processes, changed settings * Update 0.15mm Speed @MINIIS.json * Update 0.10mm Speed @MINIIS.json * changed to cubic because of speed * further changes after reviewing prusa slicer settings * simplified machine settings * retraction speeds according to prusa slicer * changed max flow according to prusa slicer * after clearification at the prusaslicer repository M900 got removed * precise wall per default * enable reverse overhang on odd by default * added settings from prusa slicer * changed cooling setings
24 lines
1.2 KiB
JSON
24 lines
1.2 KiB
JSON
{
|
|
"type": "filament",
|
|
"filament_id": "GFB98_1",
|
|
"setting_id": "GFSA04",
|
|
"name": "Prusa Generic ASA @MK4",
|
|
"from": "system",
|
|
"instantiation": "true",
|
|
"inherits": "fdm_filament_asa",
|
|
"filament_flow_ratio": [
|
|
"0.93"
|
|
],
|
|
"filament_max_volumetric_speed": [
|
|
"12"
|
|
],
|
|
"filament_start_gcode": [
|
|
"; Filament gcode\nM900 K{if nozzle_diameter[0]==0.4}0.03{elsif nozzle_diameter[0]==0.25}0.1{elsif nozzle_diameter[0]==0.3}0.06{elsif nozzle_diameter[0]==0.35}0.05{elsif nozzle_diameter[0]==0.5}0.03{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_MK4IS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.012{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"
|
|
],
|
|
"compatible_printers": [
|
|
"Prusa MK4 0.25 nozzle",
|
|
"Prusa MK4 0.4 nozzle",
|
|
"Prusa MK4 0.6 nozzle",
|
|
"Prusa MK4 0.8 nozzle"
|
|
]
|
|
}
|