amd/orcaslicer
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions 1
orcaslicer/resources/profiles
History
MusangKing ceb923bc2b ENH: adjust overhang threshold angles 
JIRA: [STUDIO-2226]

0.4mm nozzle contains different layer heights but has
the same preset threshold angle (30 degree) which is not reasonable.

Hereby, five of them are adjusted based on the overlap ratio.

Change-Id: I96300bf202c3a5fc4428186875a9212c32524ff2
2023-02-22 20:09:17 +08:00
..
Anycubic ENH: support filament_z_hop_types 2023-02-22 20:09:17 +08:00
BBL ENH: adjust overhang threshold angles 2023-02-22 20:09:17 +08:00
Creality ENH: support filament_z_hop_types 2023-02-22 20:09:17 +08:00
Voron ENH: support filament_z_hop_types 2023-02-22 20:09:17 +08:00
Anycubic.json ENH: support filament_z_hop_types 2023-02-22 20:09:17 +08:00
BBL.json ENH: support filament_z_hop_types 2023-02-22 20:09:17 +08:00
Creality.json ENH: support filament_z_hop_types 2023-02-22 20:09:17 +08:00
Voron.json ENH: support filament_z_hop_types 2023-02-22 20:09:17 +08:00