95a235ee8a
Github: #77 Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com> Change-Id: I8065a2ea57496b5f415e591225877ba773fdb9f6 (cherry picked from commit 6fb7e1084caf9006d504c24ce1f026e475bcb348)
45 lines
No EOL
1.9 KiB
JSON
45 lines
No EOL
1.9 KiB
JSON
{
|
|
"type": "machine",
|
|
"setting_id": "GM_CREALITY_000",
|
|
"name": "Creality CR-10 V2 0.4 nozzle",
|
|
"from": "system",
|
|
"instantiation": "true",
|
|
"inherits": "fdm_creality_common",
|
|
"nozzle_diameter": [
|
|
"0.4"
|
|
],
|
|
"printer_model": "Creality CR-10 V2",
|
|
"default_print_profile": "0.20mm Standard @Creality CR10V2",
|
|
"extruder_type": [
|
|
"Bowden"
|
|
],
|
|
"printable_area": [
|
|
"0x0",
|
|
"300x0",
|
|
"300x300",
|
|
"0x300"
|
|
],
|
|
"printable_height": "400",
|
|
"retract_lift_below":[
|
|
"399"
|
|
],
|
|
"machine_max_acceleration_travel": [
|
|
"1500",
|
|
"1250"
|
|
],
|
|
"max_layer_height": [
|
|
"0.36"
|
|
],
|
|
"printer_settings_id": "Creality",
|
|
"retraction_length": [
|
|
"1"
|
|
],
|
|
"retract_length_toolchange": [
|
|
"1"
|
|
],
|
|
"single_extruder_multi_material": "0",
|
|
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nG28 ; home all\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0\nG1 Y190 E15 F1500 ; intro line\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E15 F1200 ; intro line\nG92 E0",
|
|
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600{endif} ; Move print head up\nG1 X5 Y170 F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600{endif} ; Move print head further up\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
|
"change_filament_gcode": "M600",
|
|
"machine_pause_gcode": "M0"
|
|
} |