b9da42eb67
While doing a bunch of bed adhesion tests, both on Creality's FakeTak as well as on smooth PEI, while 50 degrees seems to work with most lower temp PLAs at least, but less so with the higher temp PLAs, it universally requires the first layer height to be dialed in much better to not get any warping. With the bed temperature set to 60 degrees, there is much more leeway in the first layer height while still getting unwarped prints. Particularly given that most Creality printers don't have ABL as standard, I think it might sense from a robustness perspective to have all PLAs default to at least 60 degrees, as to increase chances prints will come out just fine. https://www.prusaprinters.org/prints/4634-bed-adhesion-warp-test |
||
|---|---|---|
| .. | ||
| data/flatpak | ||
| fonts | ||
| icons | ||
| localization | ||
| profiles | ||
| shaders | ||
| udev | ||