719f09e2f2
Using my Ender 3 V3 SE I noticed weird printing behaviour. Searching for the cause, I found that the default layer height for a 0.2mm nozzle for the printer was set to 0.08mm min and 0.32mm max, which are the default 20%/80% values for a 0.4mm nozzle. This commit changes the values for all Creality printer which had not a reasonable default value for 0.2mm, 0.6mm and 0.8mm nozzles to 20% min and 80% max. Co-authored-by: SoftFever <softfeverever@gmail.com>
123 lines
3 KiB
JSON
123 lines
3 KiB
JSON
{
|
|
"type": "machine",
|
|
"setting_id": "GM001",
|
|
"printer_settings_id": "Creality",
|
|
"name": "Creality Ender-3 V3 SE 0.8 nozzle",
|
|
"from": "system",
|
|
"instantiation": "true",
|
|
"inherits": "fdm_creality_common",
|
|
"printer_model": "Creality Ender-3 V3 SE",
|
|
"printer_variant": "0.8",
|
|
"gcode_flavor": "marlin2",
|
|
"printer_structure": "i3",
|
|
"default_print_profile": "0.20mm Standard @Creality Ender3V3SE 0.8",
|
|
"extruder_clearance_height_to_rod": "47",
|
|
"extruder_clearance_max_radius": "90",
|
|
"extruder_clearance_radius": "90",
|
|
"machine_load_filament_time": "11",
|
|
"nozzle_diameter": [
|
|
"0.8"
|
|
],
|
|
"printable_area": [
|
|
"0x0",
|
|
"220x0",
|
|
"220x220",
|
|
"0x220"
|
|
],
|
|
"printable_height": "250",
|
|
"nozzle_type": "brass",
|
|
"auxiliary_fan": "0",
|
|
"machine_max_acceleration_extruding": [
|
|
"2500",
|
|
"2500"
|
|
],
|
|
"machine_max_acceleration_retracting": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"machine_max_acceleration_travel": [
|
|
"2500",
|
|
"2500"
|
|
],
|
|
"machine_max_acceleration_x": [
|
|
"2500",
|
|
"2500"
|
|
],
|
|
"machine_max_acceleration_y": [
|
|
"2500",
|
|
"2500"
|
|
],
|
|
"machine_max_acceleration_z": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"machine_max_speed_e": [
|
|
"40",
|
|
"40"
|
|
],
|
|
"machine_max_speed_x": [
|
|
"250",
|
|
"250"
|
|
],
|
|
"machine_max_speed_y": [
|
|
"250",
|
|
"250"
|
|
],
|
|
"machine_max_speed_z": [
|
|
"5",
|
|
"5"
|
|
],
|
|
"machine_max_jerk_e": [
|
|
"5",
|
|
"5"
|
|
],
|
|
"machine_max_jerk_x": [
|
|
"10",
|
|
"10"
|
|
],
|
|
"machine_max_jerk_y": [
|
|
"10",
|
|
"10"
|
|
],
|
|
"machine_max_jerk_z": [
|
|
"0.4",
|
|
"0.4"
|
|
],
|
|
"max_layer_height": [
|
|
"0.64"
|
|
],
|
|
"min_layer_height": [
|
|
"0.16"
|
|
],
|
|
"retraction_minimum_travel": [
|
|
"2"
|
|
],
|
|
"retract_before_wipe": [
|
|
"70%"
|
|
],
|
|
"retraction_length": [
|
|
"1.2"
|
|
],
|
|
"retract_length_toolchange": [
|
|
"1"
|
|
],
|
|
"retraction_speed": [
|
|
"40"
|
|
],
|
|
"deretraction_speed": [
|
|
"30"
|
|
],
|
|
"single_extruder_multi_material": "1",
|
|
"manual_filament_change": "1",
|
|
"change_filament_gcode": "M600",
|
|
"machine_pause_gcode": "M25",
|
|
"default_filament_profile": [
|
|
"Creality Generic PLA @Ender-3V3-all"
|
|
],
|
|
"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
|
|
"machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
|
|
"scan_first_layer": "0",
|
|
"disable_m73": "1",
|
|
"thumbnails": [
|
|
]
|
|
}
|