52cfa48168
add some series of printer parameter configurations. 15 Geeetech printers, including 3 series models. Thunder series. A high-speed printer and the maximum printing speed can reach 300 mm/s. Mizar series. A machine that has very exquisite print quality and ultra quiet printing. Other Geeetech printers. ---Request from Geeetech offical . Co-authored-by: SoftFever <softfeverever@gmail.com>
141 lines
3.9 KiB
JSON
141 lines
3.9 KiB
JSON
{
|
||
"type": "machine",
|
||
"name": "fdm_geeetech_common",
|
||
"from": "system",
|
||
"instantiation": "false",
|
||
"inherits": "fdm_machine_common",
|
||
"gcode_flavor": "marlin",
|
||
"machine_max_acceleration_e": [
|
||
"5000",
|
||
"5000"
|
||
],
|
||
"machine_max_acceleration_extruding": [
|
||
"1000",
|
||
"1000"
|
||
],
|
||
"machine_max_acceleration_retracting": [
|
||
"1000",
|
||
"1000"
|
||
],
|
||
"machine_max_acceleration_travel": [
|
||
"500",
|
||
"500"
|
||
],
|
||
"machine_max_acceleration_x": [
|
||
"500",
|
||
"500"
|
||
],
|
||
"machine_max_acceleration_y": [
|
||
"500",
|
||
"500"
|
||
],
|
||
"machine_max_acceleration_z": [
|
||
"500",
|
||
"500"
|
||
],
|
||
"machine_max_speed_e": [
|
||
"60",
|
||
"60"
|
||
],
|
||
"machine_max_speed_x": [
|
||
"200",
|
||
"200"
|
||
],
|
||
"machine_max_speed_y": [
|
||
"200",
|
||
"200"
|
||
],
|
||
"machine_max_speed_z": [
|
||
"10",
|
||
"10"
|
||
],
|
||
"machine_max_jerk_e": [
|
||
"5",
|
||
"5"
|
||
],
|
||
"machine_max_jerk_x": [
|
||
"8",
|
||
"8"
|
||
],
|
||
"machine_max_jerk_y": [
|
||
"8",
|
||
"8"
|
||
],
|
||
"machine_max_jerk_z": [
|
||
"0.4",
|
||
"0.4"
|
||
],
|
||
"machine_min_extruding_rate": [
|
||
"0",
|
||
"0"
|
||
],
|
||
"machine_min_travel_rate": [
|
||
"0",
|
||
"0"
|
||
],
|
||
"max_layer_height": [
|
||
"0.32"
|
||
],
|
||
"min_layer_height": [
|
||
"0.08"
|
||
],
|
||
"printable_height": "250",
|
||
"extruder_clearance_radius": "47",
|
||
"extruder_clearance_height_to_rod": "34",
|
||
"extruder_clearance_height_to_lid": "34",
|
||
"printer_settings_id": "",
|
||
"printer_technology": "FFF",
|
||
"printer_variant": "0.4",
|
||
"retraction_minimum_travel": [
|
||
"2"
|
||
],
|
||
"retract_before_wipe": [
|
||
"70%"
|
||
],
|
||
"retract_when_changing_layer": [
|
||
"1"
|
||
],
|
||
"retraction_length": [
|
||
"7"
|
||
],
|
||
"retract_length_toolchange": [
|
||
"2"
|
||
],
|
||
"z_hop": [
|
||
"0"
|
||
],
|
||
"retract_restart_extra": [
|
||
"0"
|
||
],
|
||
"retract_restart_extra_toolchange": [
|
||
"0"
|
||
],
|
||
"retraction_speed": [
|
||
"20"
|
||
],
|
||
"deretraction_speed": [
|
||
"20"
|
||
],
|
||
"silent_mode": "0",
|
||
"single_extruder_multi_material": "1",
|
||
"change_filament_gcode": "",
|
||
"machine_pause_gcode": "M25 ;pause print",
|
||
"wipe": [
|
||
"1"
|
||
],
|
||
"default_filament_profile": [
|
||
"Generic PLA @Geeetech"
|
||
],
|
||
"bed_exclude_area": [
|
||
"0x0"
|
||
],
|
||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||
"layer_change_gcode": ";------------------------------------\n;layer No：[layer_num] ———>Print Height：[layer_z] mm\n;------------------------------------",
|
||
"scan_first_layer": "0",
|
||
"nozzle_type": "undefine",
|
||
"support_multi_bed_types": "1",
|
||
"auxiliary_fan": "0",
|
||
"z_hop_types": "Normal Lift"
|
||
|
||
}
|