fc929ebb17
Profile created based on information contained in the printer's firmware and profiles recommended by the manufacturer for Cura. It has been tested on various parts including 3DBenchy with more than satisfactory results.
114 lines
No EOL
3.4 KiB
JSON
114 lines
No EOL
3.4 KiB
JSON
{
|
|
"type": "process",
|
|
"setting_id": "GP004",
|
|
"name": "0.15mm Optimal @Anycubic Kobra",
|
|
"from": "system",
|
|
"inherits": "fdm_process_common",
|
|
"instantiation": "true",
|
|
"adaptive_layer_height": "1",
|
|
"reduce_crossing_wall": "0",
|
|
"layer_height": "0.15",
|
|
"max_travel_detour_distance": "0",
|
|
"bottom_surface_pattern": "monotonic",
|
|
"bottom_shell_layers": "5",
|
|
"bottom_shell_thickness": "1.2",
|
|
"bridge_flow": "1",
|
|
"bridge_speed": "45",
|
|
"brim_width": "8",
|
|
"brim_object_gap": "0",
|
|
"compatible_printers_condition": "",
|
|
"print_sequence": "by layer",
|
|
"default_acceleration": "1000",
|
|
"top_surface_acceleration": "0",
|
|
"bridge_no_support": "0",
|
|
"draft_shield": "disabled",
|
|
"elefant_foot_compensation": "0.2",
|
|
"enable_arc_fitting": "0",
|
|
"outer_wall_line_width": "0.4",
|
|
"wall_infill_order": "inner wall/outer wall/infill",
|
|
"line_width": "0.4",
|
|
"infill_direction": "45",
|
|
"sparse_infill_density": "15%",
|
|
"sparse_infill_pattern": "grid",
|
|
"initial_layer_acceleration": "1000",
|
|
"travel_acceleration": "0",
|
|
"inner_wall_acceleration": "0",
|
|
"initial_layer_line_width": "0.4",
|
|
"initial_layer_print_height": "0.2",
|
|
"infill_combination": "0",
|
|
"sparse_infill_line_width": "0.4",
|
|
"infill_wall_overlap": "15%",
|
|
"interface_shells": "0",
|
|
"ironing_flow": "15%",
|
|
"ironing_spacing": "0.1",
|
|
"ironing_speed": "15",
|
|
"ironing_type": "no ironing",
|
|
"reduce_infill_retraction": "1",
|
|
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
|
"detect_overhang_wall": "1",
|
|
"overhang_1_4_speed": "0",
|
|
"overhang_2_4_speed": "20",
|
|
"overhang_3_4_speed": "15",
|
|
"overhang_4_4_speed": "10",
|
|
"inner_wall_line_width": "0.4",
|
|
"wall_loops": "2",
|
|
"print_settings_id": "",
|
|
"raft_layers": "0",
|
|
"seam_position": "aligned",
|
|
"skirt_distance": "5",
|
|
"skirt_height": "1",
|
|
"skirt_loops": "4",
|
|
"skirt_speed": "60",
|
|
"minimum_sparse_infill_area": "10",
|
|
"internal_solid_infill_line_width": "0",
|
|
"spiral_mode": "0",
|
|
"standby_temperature_delta": "-5",
|
|
"enable_support": "0",
|
|
"resolution": "0.012",
|
|
"support_type": "normal(auto)",
|
|
"support_style": "grid",
|
|
"support_on_build_plate_only": "0",
|
|
"support_top_z_distance": "0.15",
|
|
"support_filament": "0",
|
|
"support_line_width": "0.4",
|
|
"support_interface_loop_pattern": "0",
|
|
"support_interface_filament": "0",
|
|
"support_interface_top_layers": "3",
|
|
"support_interface_bottom_layers": "-1",
|
|
"support_interface_spacing": "0.15",
|
|
"support_interface_speed": "100%",
|
|
"support_base_pattern": "rectilinear",
|
|
"support_base_pattern_spacing": "0.15",
|
|
"support_speed": "90",
|
|
"support_threshold_angle": "65",
|
|
"support_object_xy_distance": "60%",
|
|
"tree_support_branch_angle": "40",
|
|
"tree_support_wall_count": "0",
|
|
"detect_thin_wall": "1",
|
|
"top_surface_pattern": "monotonic",
|
|
"top_surface_line_width": "0.4",
|
|
"top_shell_layers": "5",
|
|
"top_shell_thickness": "1.2",
|
|
"initial_layer_speed": "30",
|
|
"initial_layer_infill_speed": "30",
|
|
"outer_wall_speed": "60",
|
|
"precise_outer_wall": "1",
|
|
"inner_wall_speed": "60",
|
|
"internal_solid_infill_speed": "90",
|
|
"top_surface_speed": "60",
|
|
"gap_infill_speed": "30",
|
|
"sparse_infill_speed": "90",
|
|
"travel_speed": "180",
|
|
"enable_prime_tower": "0",
|
|
"wipe_tower_no_sparse_layers": "0",
|
|
"prime_tower_width": "60",
|
|
"xy_hole_compensation": "0",
|
|
"xy_contour_compensation": "0",
|
|
"wipe_before_external_loop": "1",
|
|
"wipe_on_loops": "1",
|
|
"elefant_foot_compensation_layers": "5",
|
|
"slowdown_for_curled_perimeters": "1",
|
|
"compatible_printers": [
|
|
"Anycubic Kobra 0.4 nozzle"
|
|
]
|
|
} |