96d7139b95
* added Prusa Mini with Input Shaper to profiles * refactoring to more reusable settings * added more processes, changed settings * Update 0.15mm Speed @MINIIS.json * Update 0.10mm Speed @MINIIS.json * changed to cubic because of speed * further changes after reviewing prusa slicer settings * simplified machine settings * retraction speeds according to prusa slicer * changed max flow according to prusa slicer * after clearification at the prusaslicer repository M900 got removed * precise wall per default * enable reverse overhang on odd by default * added settings from prusa slicer * changed cooling setings * changed default to inner-outer-inner wall inner-outer-inner gives pretty good overhangs with better surface * new profiles for bigger nozzles, changed some cooling settings according to prusaslicer * profiles for different nozzles sizes, better speed settings * initial layer height was wrong * wrong initial layer height * set the correct accelerations * changed firmware version number * using pressure advance UI setting instead of custom filament g-code * Update Prusa Generic PC.json * Update Prusa Generic PC.json * changed max flow for PC * added PVA filament profiles * bug fix in filament loading * changed line width according to prusa slicer * changed heatbed temperature for Minis capabilities
93 lines
1.6 KiB
JSON
93 lines
1.6 KiB
JSON
{
|
|
"type": "filament",
|
|
"filament_id": "GFU99_2",
|
|
"setting_id": "GFSA04",
|
|
"name": "Prusa Generic TPU @MINIIS",
|
|
"from": "system",
|
|
"instantiation": "true",
|
|
"inherits": "fdm_filament_tpu",
|
|
"filament_max_volumetric_speed": [
|
|
"1.35"
|
|
],
|
|
"filament_flow_ratio": [
|
|
"1.15"
|
|
],
|
|
"hot_plate_temp" : [
|
|
"50"
|
|
],
|
|
"hot_plate_temp_initial_layer" : [
|
|
"50"
|
|
],
|
|
"filament_type": [
|
|
"FLEX"
|
|
],
|
|
"nozzle_temperature_initial_layer": [
|
|
"220"
|
|
],
|
|
"nozzle_temperature": [
|
|
"210"
|
|
],
|
|
"filament_retraction_length": [
|
|
"3"
|
|
],
|
|
"filament_retraction_speed": [
|
|
"40"
|
|
],
|
|
"filament_deretraction_speed": [
|
|
"16"
|
|
],
|
|
"filament_retraction_minimum_travel": [
|
|
"6"
|
|
],
|
|
"filament_wipe": [
|
|
"1"
|
|
],
|
|
"close_fan_the_first_x_layers": [
|
|
"3"
|
|
],
|
|
"full_fan_speed_layer": [
|
|
"3"
|
|
],
|
|
"fan_min_speed": [
|
|
"30"
|
|
],
|
|
"fan_cooling_layer_time": [
|
|
"100"
|
|
],
|
|
"fan_max_speed": [
|
|
"80"
|
|
],
|
|
"slow_down_layer_time": [
|
|
"4"
|
|
],
|
|
"reduce_fan_stop_start_freq": [
|
|
"1"
|
|
],
|
|
"slow_down_for_layer_cooling": [
|
|
"1"
|
|
],
|
|
"slow_down_min_speed": [
|
|
"10"
|
|
],
|
|
"enable_overhang_bridge_fan": [
|
|
"1"
|
|
],
|
|
"overhang_fan_threshold": [
|
|
"50%"
|
|
],
|
|
"overhang_fan_speed": [
|
|
"50"
|
|
],
|
|
"support_material_interface_fan_speed": [
|
|
"-1"
|
|
],
|
|
"pressure_advance": [
|
|
"0"
|
|
],
|
|
"compatible_printers": [
|
|
"Prusa MINIIS 0.4 nozzle",
|
|
"Prusa MINIIS 0.25 nozzle",
|
|
"Prusa MINIIS 0.6 nozzle",
|
|
"Prusa MINIIS 0.8 nozzle"
|
|
]
|
|
}
|