193062570e
* Add Sermoon V1 to Creality Generic PLA.json * Add Sermoon V1 to Creality Generic ABS.json * Add Sermoon V1 to Creality Generic PETG.json * Add Sermoon V1 to Creality Generic TPU.json * Add Generic TPU to Creality Sermoon V1.json * Update Creality Sermoon V1 0.4 nozzle.json Update nozzle_type and small 64x64 thumbnail size in Creality Sermoon V1 0.4 nozzle.json * Set initial extruder_clearance values Creality Sermoon V1 0.4 nozzle.json
73 lines
4 KiB
JSON
73 lines
4 KiB
JSON
{
|
|
"type": "machine",
|
|
"setting_id": "GM001",
|
|
"name": "Creality Sermoon V1 0.4 nozzle",
|
|
"from": "system",
|
|
"instantiation": "true",
|
|
"inherits": "fdm_creality_common",
|
|
"printer_model": "Creality Sermoon V1",
|
|
"default_filament_profile": [
|
|
"Creality Generic PLA"
|
|
],
|
|
"default_print_profile": "0.20mm Standard @Creality Sermoon V1",
|
|
"nozzle_diameter": [
|
|
"0.4"
|
|
],
|
|
"retract_when_changing_layer": [
|
|
"0"
|
|
],
|
|
"retraction_length": [
|
|
"0.8"
|
|
],
|
|
"z_hop": [
|
|
"0"
|
|
],
|
|
"machine_max_acceleration_extruding": [
|
|
"7000",
|
|
"500"
|
|
],
|
|
"machine_max_acceleration_retracting": [
|
|
"7000",
|
|
"1000"
|
|
],
|
|
"machine_max_acceleration_x": [
|
|
"7000",
|
|
"500"
|
|
],
|
|
"machine_max_acceleration_y": [
|
|
"7000",
|
|
"500"
|
|
],
|
|
"machine_max_speed_x": [
|
|
"7000",
|
|
"500"
|
|
],
|
|
"machine_max_speed_y": [
|
|
"7000",
|
|
"500"
|
|
],
|
|
"layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}\n;AFTER_LAYER_CHANGE\n;Z>[layer_z]",
|
|
"machine_start_gcode": ";generated by SuperSlicer 1.5.0 on 2023-06-07 at 17:32:332\nG90 ; use absolute coordinates\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nM140 S[bed_temperature_initial_layer] ; Set bed temp\nM104 S170 ; set temporary nozzle temp to prevent oozing during homing\nG28 ; Home\nM105 ; Report Temps\nM190 S[bed_temperature_initial_layer] ; Wait for bed to reach target\nM104 S[nozzle_temperature_initial_layer] ; Set hot end temp\nM105 ; Report Temps\nM109 S[nozzle_temperature_initial_layer] ; Wait for hot end to reach target\nM105 ; Report Temps\nM82 ; Absolute extrusion mode\n#G28 ; Home\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up\nG1 X173.0 Y10 Z0.28 F5000.0 ; Move to start position\nG1 X173.0 Y170.0 Z0.28 F1500.0 E15 ; Draw the first line\nG1 X173.4 Y170.0 Z0.28 F5000.0 ; Move to side a little\nG1 X173.4 Y40 Z0.28 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up\nG92 E0\nSTART_PRINT",
|
|
"machine_end_gcode": "M140 S0 ; Turn-off bed\nM107 ; Turn off cooling fan\nG91 ; Relative positioning\nG1 E-1 F2700 ; Retract\nG1 E-2 Z0.2 F2400 ; Retract and raise Z\nG1 X5 Y5 F3000 ; Wipe\nG1 Z0.95 ; Raise Z more\nG90 ; Absolute positioning\nG1 X10 Y160 ; Eject print\nM106 S0 ; Turn off fan\nM104 S0 ; Turn-off hot end\nM140 S0 ; Turn-off bed\n{ if max_layer_z < printable_height-10 }G1 Z{min(max_layer_z+70,printable_height-10)}; move print up {endif}; Eject print z (conditional)\nM84 X Y E ; Disable steppers except Z\nG92 E0 ; Reset Extruder\nM82;abs extrusion\nEND_PRINT",
|
|
"machine_pause_gcode": "M25 ;pause print\n; Sermoon V1 Marlin buffers commands, so flush with these G4 P10 commands\nG4 P10\nG4 P10\nG4 P10\nG4 P10\nG4 P10\nG4 P10\nG4 P10\nG4 P10\nG4 P10\nG4 P10\n",
|
|
"printable_area": [
|
|
"0x0",
|
|
"175x0",
|
|
"175x175",
|
|
"0x175"
|
|
],
|
|
"print_host": "10.0.0.51",
|
|
"print_host_webui": "10.0.0.51",
|
|
"gcode_flavor": "marlin",
|
|
"thumbnails": [
|
|
"64x64",
|
|
"400x400"
|
|
],
|
|
"extruder_clearance_height_to_lid": "125",
|
|
"extruder_clearance_height_to_rod": "40",
|
|
"extruder_clearance_radius": "50",
|
|
"printable_height": "165",
|
|
"change_filament_gcode": "; S1 Pause For Filament change\nM125",
|
|
"nozzle_type": "brass",
|
|
"auxiliary_fan": "1"
|
|
}
|