orcaslicer/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json

{
    "type": "machine",
    "name": "Bambu Lab A1 mini 0.4 nozzle",
    "inherits": "fdm_bbl_3dp_001_common",
    "from": "system",
    "setting_id": "GM020",
    "instantiation": "true",
    "nozzle_diameter": [
        "0.4"
    ],
    "printer_model": "Bambu Lab A1 mini",
    "printer_variant": "0.4",
    "auxiliary_fan": "0",
    "bed_exclude_area": [],
    "best_object_pos": "0.7x0.5",
    "default_filament_profile": [
        "Bambu PLA Basic @BBL A1M"
    ],
    "default_print_profile": "0.20mm Standard @BBL A1M",
    "extruder_clearance_height_to_rod": "25",
    "extruder_clearance_max_radius": "73",
    "extruder_clearance_radius": "73",
    "head_wrap_detect_zone": [
        "156x152",
        "180x152",
        "180x180",
        "156x180"
    ],
    "machine_load_filament_time": "28",
    "machine_max_acceleration_z": [
        "1500",
        "1500"
    ],
    "machine_max_jerk_e": [
        "3",
        "3"
    ],
    "machine_max_jerk_z": [
        "5",
        "5"
    ],
    "machine_max_speed_z": [
        "30",
        "30"
    ],
    "machine_unload_filament_time": "34",
    "nozzle_type": "stainless_steel",
    "nozzle_volume": "32",
    "printable_area": [
        "0x0",
        "180x0",
        "180x180",
        "0x180"
    ],
    "printable_height": "180",
    "retract_lift_below":[
        "179"
    ],
    "printer_structure": "i3",
    "scan_first_layer": "0",
    "upward_compatible_machine": [
        "Bambu Lab P1S 0.4 nozzle",
        "Bambu Lab P1P 0.4 nozzle",
        "Bambu Lab X1 0.4 nozzle",
        "Bambu Lab X1 Carbon 0.4 nozzle",
        "Bambu Lab X1E 0.4 nozzle",
        "Bambu Lab A1 0.4 nozzle"
    ],
    "machine_start_gcode": ";===== machine: A1 mini =========================\n;===== date: 20231226 =====================\n\n;===== start to heat heatbead&hotend==========\nM1002 gcode_claim_action : 2\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\nM104 S170\nM140 S[bed_temperature_initial_layer_single]\nG392 S0 ;turn off clog detect\n;=====start printer sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B0 L100 C37 D10 M100 E37 F10 N100\nM1006 A0 B0 L100 C41 D10 M100 E41 F10 N100\nM1006 A0 B0 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A43 B10 L100 C39 D10 M100 E46 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C39 D10 M100 E43 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C41 D10 M100 E41 F10 N100\nM1006 A0 B0 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B0 L100 C49 D10 M100 E49 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B10 L100 C39 D10 M100 E48 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C39 D10 M100 E44 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A43 B10 L100 C39 D10 M100 E46 F10 N100\nM1006 W\nM18\n;=====avoid end stop =================\nG91\nG380 S2 Z30 F1200\nG380 S2 Z-20 F1200\nG1 Z5 F1200\nG90\n\n;===== reset machine status =================\nM290 X39 Y39 Z8\nM204 S6000\n\nM630 S0 P0\nG91\nM17 Z0.3 ; lower the z-motor current\n\nG90\nM17 X0.7 Y0.9 Z0.5 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM83\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\n;====== cog noise reduction=================\nM982.2 S1 ; turn on cog noise reduction\n\n;===== prepare print temperature and material ==========\nM400\nM18\nM109 S100 H170\nM104 S170\nM400\nM17\nM400\nG28 X\n\nM211 X0 Y0 Z0 ;turn off soft endstop ; turn off soft endstop to prevent protential logic problem\n\nM975 S1 ; turn on\n\nG1 X0.0 F30000\nG1 X-13.5 F3000\n\nM620 M ;enable remap\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    G392 S0 ;turn on clog detect\n    M1002 gcode_claim_action : 4\n    M400\n    M1002 set_filament_type:UNKNOWN\n    M109 S[nozzle_temperature_initial_layer]\n    M104 S250\n    M400\n    T[initial_no_support_extruder]\n    G1 X-13.5 F3000\n    M400\n    M620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n    M109 S250 ;set nozzle to common flush temp\n    M106 P1 S0\n    G92 E0\n    G1 E50 F200\n    M400\n    M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n    M104 S{nozzle_temperature_range_high[initial_no_support_extruder]}\n    G92 E0\n    G1 E50 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n    M400\n    M106 P1 S178\n    G92 E0\n    G1 E5 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n    M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\n    M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-40}\n    G92 E0\n    G1 E-0.5 F300\n\n    G1 X0 F30000\n    G1 X-13.5 F3000\n    G1 X0 F30000 ;wipe and shake\n    G1 X-13.5 F3000\n    G1 X0 F12000 ;wipe and shake\n    G1 X0 F30000\n    G1 X-13.5 F3000\n    M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-40}\n    G392 S0 ;turn off clog detect\nM621 S[initial_no_support_extruder]A\n\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== mech mode fast check============================\nM1002 gcode_claim_action : 3\nG0 X25 Y175 F20000 ; find a soft place to home\n;M104 S0\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nM104 S170\n\n; build plate detect\nM1002 judge_flag build_plate_detect_flag\nM622 S1\n  G39.4\n  M400\nM623\n\nG1 Z5 F3000\nG1 X90 Y-1 F30000\nM400 P200\nM970.3 Q1 A7 K0 O2\nM974 Q1 S2 P0\n\nG1 X90 Y0 Z5 F30000\nM400 P200\nM970 Q0 A10 B50 C90 H15 K0 M20 O3\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X-1 Y10\nG28 X ; re-home XY\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\n\nM104 S170 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\nM211 S; push soft endstop status\nM211 X0 Y0 Z0 ;turn off Z axis endstop\n\nM83\nG1 E-1 F500\nG90\nM83\n\nM109 S170\nM104 S140\nG0 X90 Y-4 F30000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X91 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X92 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X93 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X94 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X95 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X96 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X97 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X98 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\n\nG1 Z5 F30000\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\nG1 X25 Y175 F30000.1 ;Brush material\nG1 Z0.2 F30000.1\nG1 Y185\nG91\nG1 X-30 F30000\nG1 Y-2\nG1 X27\nG1 Y1.5\nG1 X-28\nG1 Y-2\nG1 X30\nG1 Y1.5\nG1 X-30\nG90\nM83\n\nG1 Z5 F3000\nG0 X50 Y175 F20000 ; find a soft place to home\nG28 Z P0 T300; home z with low precision, permit 300deg temperature\nG29.2 S0 ; turn off ABL\n\nG0 X85 Y185 F10000 ;move to exposed steel surface and stop the nozzle\nG0 Z-1.01 F10000\nG91\n\nG2 I1 J0 X2 Y0 F2000.1\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\n\nG90\nG1 Z5 F30000\nG1 X25 Y175 F30000.1 ;Brush material\nG1 Z0.2 F30000.1\nG1 Y185\nG91\nG1 X-30 F30000\nG1 Y-2\nG1 X27\nG1 Y1.5\nG1 X-28\nG1 Y-2\nG1 X30\nG1 Y1.5\nG1 X-30\nG90\nM83\n\nG1 Z5\nG0 X55 Y175 F20000 ; find a soft place to home\nG28 Z P0 T300; home z with low precision, permit 300deg temperature\nG29.2 S0 ; turn off ABL\n\nG1 Z10\nG1 X85 Y185\nG1 Z-1.01\nG1 X95\nG1 X90\n\nM211 R; pop softend status\n\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== wait heatbed  ====================\nM1002 gcode_claim_action : 2\nM104 S0\nM190 S[bed_temperature_initial_layer_single];set bed temp\nM109 S140\n\nG1 Z5 F3000\nG29.2 S1\nG1 X10 Y10 F20000\n\n;===== bed leveling ==================================\n;M1002 set_flag g29_before_print_flag=1\nM1002 judge_flag g29_before_print_flag\nM622 J1\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28 T145\n\nM623\n\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\n\nG1 X-13.5 Y0 Z10 F10000\nG1 E1.2 F500\nM400\nM1002 set_filament_type:UNKNOWN\nM109 S{nozzle_temperature[initial_extruder]}\nM400\n\nM412 S1 ;    ===turn on  filament runout detection===\nM400 P10\n\nG392 S0 ;turn on clog detect\n\nM620.3 W1; === turn on filament tangle detection===\nM400 S2\n\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n;M1002 set_flag extrude_cali_flag=1\nM1002 judge_flag extrude_cali_flag\nM622 J1\n    M1002 gcode_claim_action : 8\n    \n    M400\n    M900 K0.0 L1000.0 M1.0\n    G90\n    M83\n    G0 X68 Y-4 F30000\n    G0 Z0.2 F18000 ;Move to start position\n    M400\n    G0 X88 E10  F{outer_wall_volumetric_speed/(24/20)    * 60}\n    G0 X93 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\n    G0 X98 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X103 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\n    G0 X108 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X113 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\n    G0 Y0 Z0 F20000\n    M400\n    \n    G1 X-13.5 Y0 Z10 F10000\n    M400\n    \n    G1 E10 F{outer_wall_volumetric_speed/2.4*60}\n    M983 F{outer_wall_volumetric_speed/2.4} A0.3 H[nozzle_diameter]; cali dynamic extrusion compensation\n    M106 P1 S178\n    M400 S7\n    G1 X0 F18000\n    G1 X-13.5 F3000\n    G1 X0 F18000 ;wipe and shake\n    G1 X-13.5 F3000\n    G1 X0 F12000 ;wipe and shake\n    G1 X-13.5 F3000\n    M400\n    M106 P1 S0\n\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M983 F{outer_wall_volumetric_speed/2.4} A0.3 H[nozzle_diameter]; cali dynamic extrusion compensation\n        M106 P1 S178\n        M400 S7\n        G1 X0 F18000\n        G1 X-13.5 F3000\n        G1 X0 F18000 ;wipe and shake\n        G1 X-13.5 F3000\n        G1 X0 F12000 ;wipe and shake\n        M400\n        M106 P1 S0\n    M623\n    \n    G1 X-13.5 F3000\n    M400\n    M984 A0.1 E1 S1 F{outer_wall_volumetric_speed/2.4}\n    M106 P1 S178\n    M400 S7\n    G1 X0 F18000\n    G1 X-13.5 F3000\n    G1 X0 F18000 ;wipe and shake\n    G1 X-13.5 F3000\n    G1 X0 F12000 ;wipe and shake\n    G1 X-13.5 F3000\n    M400\n    M106 P1 S0\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n;===== extrude cali test ===============================\nM104 S{nozzle_temperature_initial_layer[initial_extruder]}\nG90\nM83\nG0 X68 Y-2.5 F30000\nG0 Z0.2 F18000 ;Move to start position\nG0 X88 E10  F{outer_wall_volumetric_speed/(24/20)    * 60}\nG0 X93 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X98 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 X103 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X108 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 X113 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X115 Z0 F20000\nG0 Z5\nM400\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\n\nM400 ; wait all motion done before implement the emprical L parameters\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.02} ; for Textured PEI Plate\n{endif}\n\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n\nM211 X0 Y0 Z0 ;turn off soft endstop\nM1007 S1\n",
    "machine_end_gcode": ";===== date: 20231229 =====================\n;turn off nozzle clog detect\nG392 S0\n\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X0 Y{first_layer_center_no_wipe_tower[1]} F18000 ; move to safe pos\nG1 X-13.0 F3000 ; move to safe pos\n{if !spiral_mode && print_sequence != \"by object\"}\nM1002 judge_flag timelapse_record_flag\nM622 J1\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM991 S0 P-1 ;end timelapse at safe pos\nM623\n{endif}\n\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\n;G1 X27 F15000 ; wipe\n\n; pull back filament to AMS\nM620 S255\nG1 X181 F12000\nT255\nG1 X0 F18000\nG1 X-13.0 F3000\nG1 X0 F18000 ; wipe\nM621 S255\n\nM104 S0 ; turn off hotend\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 180}\n    G1 Z{max_layer_z + 100.0} F600\n    G1 Z{max_layer_z +98.0}\n{else}\n    G1 Z180 F600\n    G1 Z180\n{endif}\nM400 P100\nM17 R ; restore z current\n\nG90\nG1 X-13 Y180 F3600\n\nG91\nG1 Z-1 F600\nG90\nM83\n\nM220 S100  ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\n;=====printer finish  sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A0 B20 L100 C37 D20 M100 E42 F20 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C46 D10 M100 E46 F10 N100\nM1006 A44 B20 L100 C39 D20 M100 E48 F20 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C39 D10 M100 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C39 D10 M100 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E48 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B20 L100 C41 D20 M100 E49 F20 N100\nM1006 A0 B20 L100 C0 D20 M100 E0 F20 N100\nM1006 A0 B20 L100 C37 D20 M100 E37 F20 N100\nM1006 W\n;=====printer finish  sound=========\nM400 S1\nM18 X Y Z\n",
    "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change\n",
    "time_lapse_gcode": ";===================== date: 202312028 =====================\n{if !spiral_mode && print_sequence != \"by object\"}\n; don't support timelapse gcode in spiral_mode and by object sequence for I3 structure printer\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\nG92 E0\nG17\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 Z{max_layer_z + 0.4}\nG1 X0 Y{first_layer_center_no_wipe_tower[1]} F18000 ; move to safe pos\nG1 X-13.0 F3000 ; move to safe pos\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 X0 F18000\nM623\n\nM622.1 S1\nM1002 judge_flag g39_detection_flag\nM622 J1\n  ; enable nozzle clog detect at 3rd layer\n  {if layer_num == 2}\n    M400\n    G90\n    M83\n    M204 S5000\n    G0 Z2 F4000\n    G0 X-6 Y170 F20000\n    G39 S1 X-6 Y170\n    G0 Z2 F4000\n    G0 X90 Y90 F30000\n  {endif}\n\n\n  {if !in_head_wrap_detect_zone}\n    M622.1 S0\n    M1002 judge_flag g39_mass_exceed_flag\n    M622 J1\n    {if layer_num > 2}\n      G392 S0\n      M400\n      G90\n      M83\n      M204 S5000\n      G0 Z{max_layer_z + 0.4} F4000\n      G39.3 S1\n      G0 Z{max_layer_z + 0.4} F4000\n      G392 S0\n    {endif}\n    M623\n  {endif}\nM623\n{endif}\n",
    "change_filament_gcode": ";===== machine: A1 mini =========================\n;===== date: 20231225 =======================\nG392 S0\nM1007 S0\nM620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1}\nG17\nG2 Z{max_layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n\nG1 X180 F18000\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nM620.10 A0 F[old_filament_e_feedrate]\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\nM620.10 A1 F[new_filament_e_feedrate] L[flush_length] H[nozzle_diameter] T[nozzle_temperature_range_high]\n\nG1 Y90 F9000\n\n{if next_extruder < 255}\nM400\n\nG92 E0\nM628 S0\n\n{if flush_length_1 > 1}\n; FLUSH_START\n; always use highest temperature to flush\nM400\nM1002 set_filament_type:UNKNOWN\nM109 S[nozzle_temperature_range_high]\nM106 P1 S60\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\nM400\nM1002 set_filament_type:{filament_type[next_extruder]}\n{endif}\n\n{if flush_length_1 > 45 && flush_length_2 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_2 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 45 && flush_length_3 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_3 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 45 && flush_length_4 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_4 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n\nM629\n\nM400\nM106 P1 S60\nM109 S[new_filament_temp]\nG1 E5 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nM400\nG1 Z{max_layer_z + 3.0} F3000\nM106 P1 S0\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\nG392 S0\nM1007 S1\n"
}