f7ee8642e9
* Update 0.25mm Quality Speed @RatRig V-Core 4 HYBRID 0.4.json it's HYBRID not HYBIRD * Update 0.25mm Quality Speed @RatRig V-Core 4 HYBRID 0.5.json it's HYBRID not HYBIRD * Update 0.25mm Quality Speed @RatRig V-Core 4 HYBRID 0.6.json it's HYBRID not HYBIRD * Add files via upload Adding process files for the 0.8 nozzle * Add files via upload machine profiles for 0.8 nozzle * Update Ratrig.json Added support for 0.8.nozle * Add files via upload Added filament profile for the more and more popular PCTG * Update Ratrig.json Add filament PCTG * Update Ratrig.json Filament setting for big (>0.4) nozzles * Add files via upload Filament setting for big (>0.4) nozzles * Filament setting for big (>0.4) nozzles Filament setting for big (>0.4) nozzles * Optimized layer and extrusion values Optimized layer and extrusion values * New set of profiles for RatRig V-Core 4 - 400 IDEX New developed set of profiles for RatRig V-Core 4 - 400 IDEX with virtual copy and mirror printers (with appropriate smaller build plates and idex commands) * New set of profiles for RatRig V-Core 4 - 400 IDEX New developed set of profiles for RatRig V-Core 4 - 400 IDEX with virtual copy and mirror printers (with appropriate smaller build plates and idex commands) * New set of profiles for RatRig V-Core 4 - 400 IDEX New developed set of profiles for RatRig V-Core 4 - 400 IDEX with virtual copy and mirror printers (with appropriate smaller build plates and idex commands) * Profiles V-Core4 IDEX 300 + 500 Added profiles for Ratrig V-Core4 IDEX bedsize 300 and 500 * Profiles V-Core4 IDEX 300 + 500 Added profiles for Ratrig V-Core4 IDEX bedsize 300 and 500 * Complete profile sets for V-Core 4 - IDEX Now the profile sets for V-Core 4 IDEX - size 300+400+500, all with copy and mirror mode, are completed. (profiles are tested in real prints for V-Core 4 IDEX 400 including copy and mirror, 300+500 only calculated) * Complete profile sets for V-Core 4 - IDEX Now the profile sets for V-Core 4 IDEX - size 300+400+500, all with copy and mirror mode, are completed. (profiles are tested in real prints for V-Core 4 IDEX 400 including copy and mirror, 300+500 only calculated) * Updated Filament for large nozzles (>=0.6) Added missing TPU for big nozzles --------- Co-authored-by: SoftFever <softfeverever@gmail.com>
65 lines
2.5 KiB
JSON
65 lines
2.5 KiB
JSON
{
|
|
"type": "machine",
|
|
"setting_id": "GM002",
|
|
"name": "RatRig V-Core 4 IDEX 500 MIRROR MODE 0.5 nozzle",
|
|
"from": "system",
|
|
"instantiation": "true",
|
|
"inherits": "fdm_klipper_common",
|
|
"printer_model": "RatRig V-Core 4 IDEX 500 MIRROR MODE",
|
|
"printer_variant": "0.5",
|
|
"nozzle_diameter": [
|
|
"0.5", "0.5"
|
|
],
|
|
"extruder_offset": [
|
|
"0x0",
|
|
"0x0"
|
|
],
|
|
"manual_filament_change": "0",
|
|
"single_extruder_multi_material": "0",
|
|
"printable_area": [
|
|
"125x0",
|
|
"345x0",
|
|
"345x500",
|
|
"125x500"
|
|
],
|
|
"machine_max_speed_x": ["500", "500"],
|
|
"machine_max_speed_y": ["500", "500"],
|
|
"machine_max_speed_z": ["200", "200"],
|
|
"machine_max_speed_e": ["120", "120"],
|
|
"machine_max_acceleration_x": ["20000", "20000"],
|
|
"machine_max_acceleration_y": ["20000", "20000"],
|
|
"machine_max_acceleration_z": ["200", "200"],
|
|
"machine_max_acceleration_e": ["5000", "5000"],
|
|
"machine_max_acceleration_extruding": ["20000", "20000"],
|
|
"machine_max_acceleration_retracting": ["20000", "20000"],
|
|
"machine_max_acceleration_travel": ["20000", "20000"],
|
|
"machine_max_jerk_x": ["5", "5"],
|
|
"machine_max_jerk_y": ["5", "5"],
|
|
"machine_max_jerk_z": ["0.4", "0.4"],
|
|
"machine_max_jerk_e": ["5", "5"],
|
|
"min_layer_height": ["0.06"],
|
|
"max_layer_height": ["0.3"],
|
|
"extruder_clearance_radius": "45",
|
|
"extruder_clearance_height_to_rod": "25",
|
|
"extruder_clearance_height_to_lid": "140",
|
|
"retract_lift_below": ["0.2"],
|
|
"retraction_length": ["0.8"],
|
|
"retraction_speed": ["120"],
|
|
"deretraction_speed": ["120"],
|
|
"wipe": ["1"],
|
|
"retract_before_wipe": ["70%"],
|
|
"z_hop": ["0.2"],
|
|
"machine_start_gcode": "G28\nIDEX_MIRROR\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
|
|
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
|
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
|
|
"change_filament_gcode": "",
|
|
"machine_pause_gcode": "PAUSE",
|
|
"printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0",
|
|
"printable_height": "500",
|
|
"time_lapse_gcode": "TIMELAPSE_TAKE_FRAME",
|
|
"thumbnails": [
|
|
"64x64/PNG",
|
|
"100x100/PNG",
|
|
"400x300/PNG"
|
|
]
|
|
}
|