86 lines
No EOL
2.5 KiB
JSON
86 lines
No EOL
2.5 KiB
JSON
{
|
|
"type": "machine",
|
|
"setting_id": "GM001",
|
|
"name": "BIQU B1 (0.4 nozzle)",
|
|
"from": "system",
|
|
"instantiation": "true",
|
|
"inherits": "fdm_biqu_common",
|
|
"printer_model": "BIQU B1",
|
|
"default_print_profile": "0.20mm Standard @BIQU B1 (0.4 nozzle)",
|
|
"nozzle_diameter": [
|
|
"0.4"
|
|
],
|
|
"printable_area": [
|
|
"0x0",
|
|
"235x0",
|
|
"235x235",
|
|
"0x235"
|
|
],
|
|
"printable_height": "270",
|
|
"nozzle_type": "undefine",
|
|
"auxiliary_fan": "0",
|
|
"deretraction_speed": [
|
|
"70"
|
|
],
|
|
"gcode_flavor": "marlin",
|
|
"machine_max_acceleration_e": [
|
|
"10000"
|
|
],
|
|
"machine_max_acceleration_extruding": [
|
|
"1000"
|
|
],
|
|
"machine_max_acceleration_retracting": [
|
|
"1000"
|
|
],
|
|
"machine_max_acceleration_x": [
|
|
"1000"
|
|
],
|
|
"machine_max_acceleration_y": [
|
|
"1000"
|
|
],
|
|
"machine_max_acceleration_z": [
|
|
"100"
|
|
],
|
|
"machine_max_speed_e": [
|
|
"60"
|
|
],
|
|
"machine_max_speed_x": [
|
|
"500"
|
|
],
|
|
"machine_max_speed_y": [
|
|
"500"
|
|
],
|
|
"machine_max_speed_z": [
|
|
"10"
|
|
],
|
|
"machine_max_jerk_e": [
|
|
"5"
|
|
],
|
|
"machine_max_jerk_x": [
|
|
"10"
|
|
],
|
|
"machine_max_jerk_y": [
|
|
"10"
|
|
],
|
|
"machine_max_jerk_z": [
|
|
"0.3"
|
|
],
|
|
"max_layer_height": [
|
|
"0.32"
|
|
],
|
|
"min_layer_height": [
|
|
"0.10"
|
|
],
|
|
"printer_variant": "0.4",
|
|
"retraction_minimum_travel": [
|
|
"1.5"
|
|
],
|
|
"retraction_length": [
|
|
"7"
|
|
],
|
|
"retraction_speed": [
|
|
"70"
|
|
],
|
|
"machine_start_gcode": "; BIQU B1 Start G-code\nM117 Getting the bed up to temp!\nM140 S[first_layer_bed_temperature]; Set Heat Bed temperature\nM190 S[first_layer_bed_temperature]; Wait for Heat Bed temperature\nM117 Getting the extruder up to temp!\nM104 S[first_layer_temperature]; Set Extruder temperature\nG92 E0; Reset Extruder\nM117 Homing axes\nG28; Home all axes\nM109 S[first_layer_temperature]; Wait for Extruder temperature\nG1 Z2.0 F3000; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X4.1 Y20 Z0.3 F5000.0; Move to start position\nM117 Purging\nG1 X4.1 Y200.0 Z0.3 F1500.0 E15; Draw the first line\nG1 X4.4 Y200.0 Z0.3 F5000.0; Move to side a little\nG1 X4.4 Y20 Z0.3 F1500.0 E30; Draw the second line\nG92 E0; Reset Extruder\nM117 Lets make\nG1 Z2.0 F3000; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F5000.0; Move over to prevent blob squish",
|
|
"machine_end_gcode": ";BIQU B1 Default End Gcode\nG91;Relative positioning\nG1 E-2 F2700;Retract a bit\nG1 E-2 Z0.2 F2400;Retract a bit more and raise Z\nG1 X5 Y5 F3000;Wipe out\nG1 Z10;Raise Z by 10mm\nG90;Return to absolute positioning\nG1 X0 Y{print_bed_max[1]};\nM106 S0;Turn-off fan\nM104 S0;Turn-off hotend\nM140 S0;Turn-off bed\nM84 X Y E;Disable all steppers but Z"
|
|
} |