115 lines
No EOL
3.4 KiB
JSON
115 lines
No EOL
3.4 KiB
JSON
{
|
|
"type": "machine",
|
|
"setting_id": "GM001",
|
|
"name": "UltiMaker 2 0.4 nozzle",
|
|
"from": "system",
|
|
"instantiation": "true",
|
|
"inherits": "fdm_machine_common",
|
|
"printer_model": "UltiMaker 2",
|
|
"default_print_profile": "0.18mm Standard @UltiMaker 2",
|
|
"nozzle_diameter": [
|
|
"0.4"
|
|
],
|
|
"printable_area": [
|
|
"0x0",
|
|
"224x0",
|
|
"224x225",
|
|
"0x225"
|
|
],
|
|
"printable_height": "212",
|
|
"nozzle_type": "undefine",
|
|
"auxiliary_fan": "0",
|
|
"machine_max_acceleration_extruding": [
|
|
"1500",
|
|
"1500"
|
|
],
|
|
"machine_max_acceleration_retracting": [
|
|
"1500",
|
|
"1500"
|
|
],
|
|
"machine_max_acceleration_travel": [
|
|
"3000",
|
|
"3000"
|
|
],
|
|
"machine_max_acceleration_x": [
|
|
"3000",
|
|
"3000"
|
|
],
|
|
"machine_max_acceleration_y": [
|
|
"3000",
|
|
"3000"
|
|
],
|
|
"machine_max_acceleration_z": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"machine_max_speed_e": [
|
|
"120",
|
|
"120"
|
|
],
|
|
"machine_max_speed_x": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"machine_max_speed_y": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"machine_max_speed_z": [
|
|
"12",
|
|
"12"
|
|
],
|
|
"machine_max_jerk_e": [
|
|
"2.5",
|
|
"2.5"
|
|
],
|
|
"machine_max_jerk_x": [
|
|
"20",
|
|
"20"
|
|
],
|
|
"machine_max_jerk_y": [
|
|
"20",
|
|
"20"
|
|
],
|
|
"machine_max_jerk_z": [
|
|
"0.4",
|
|
"0.4"
|
|
],
|
|
"max_layer_height": [
|
|
"0.3"
|
|
],
|
|
"min_layer_height": [
|
|
"0.08"
|
|
],
|
|
"printer_settings_id": "Qidi",
|
|
"retraction_minimum_travel": [
|
|
"5"
|
|
],
|
|
"retract_before_wipe": [
|
|
"70%"
|
|
],
|
|
"retraction_length": [
|
|
"4.5"
|
|
],
|
|
"retract_length_toolchange": [
|
|
"10"
|
|
],
|
|
"retraction_speed": [
|
|
"35"
|
|
],
|
|
"deretraction_speed": [
|
|
"0"
|
|
],
|
|
"wipe_distance": [
|
|
"0.2"
|
|
],
|
|
"single_extruder_multi_material": "1",
|
|
"change_filament_gcode": "",
|
|
"machine_pause_gcode": "M0",
|
|
"default_filament_profile": [
|
|
"UltiMaker Generic PLA"
|
|
],
|
|
"machine_start_gcode": "; # # # # # # START Header\nG21; metric values\nG90; absolute positioning\nM82 ; set extruder to absolute mode\nM107; start with the fan off\n\nM140 S[bed_temperature_initial_layer_single]; start bed heating\n\nG28 X0 Y0 Z0; move X/Y/Z to endstops\nG1 X1 Y6 F15000; move X/Y to start position\nG1 Z35 F9000; move Z to start position\n\n; Wait for bed and nozzle temperatures\nM190 S{hot_plate_temp_initial_layer[0] - 5}; wait for bed temperature - 5\nM140 S[bed_temperature_initial_layer_single]; continue bed heating\nM109 S[nozzle_temperature_initial_layer]; wait for nozzle temperature\n\n; Purge and prime\nM83; set extruder to relative mode\nG92 E0; reset extrusion distance\nG0 X0 Y1 F10000\nG1 F150 E20 ; compress the bowden tube\nG1 E-8 F1200\nG0 X30 Y1 F5000\nG0 F1200 Z{initial_layer_print_height/2}; Cut the connection to priming blob\nG0 X100 F10000; disconnect with the prime blob\nG0 X50; Avoid the metal clip holding the Ultimaker glass plate\nG0 Z0.2 F720\nG1 E8 F1200\nG1 X80 E3 F1000; intro line 1\nG1 X110 E4 F1000 ; intro line 2\nG1 X140 F600; drag filament to decompress bowden tube\nG1 X100 F3200; wipe backwards a bit\nG1 X150 F3200; back to where there is no plastic: avoid dragging\nG92 E0; reset extruder reference\nM82; set extruder to absolute mode\n\n; # # # # # # END Header",
|
|
"machine_end_gcode": "; # # # # # # START Footer\nG91; relative coordinates\n;G1 E-1 F1200; retract the filament\nG1 Z+15 X-10 Y-10 E-7 F6000; move Z a bit\n; G1 X-10 Y-10 F6000; move XY a bit\nG1 E-5.5 F300; retract the filament\nG28 X0 Y0; move X/Y to min endstops, so the head is out of the way\nM104 S0; extruder heater off\nM140 S0; heated bed heater off (if you have it)\nM84; disable motors\n; # # # # # # END Footer\n",
|
|
"scan_first_layer": "0"
|
|
} |