1c6f2c6817
* FIX: mistake in filament vendor jira:[NEW] Signed-off-by: xun.zhang <xun.zhang@bambulab.com> Change-Id: I3af712e417379d8b98ae18feebffe465bfa1e72d * NEW:set customized materials for the A1 P1 series Change-Id: I9c34f62867c074bf9ebb315013e5e40526e0eac7 * FIX: the flow rate ratio crashes after load model for third party printer Jira: 5244 Change-Id: Idd829c9d99eeba9d180653ac8de4e51b9a0d6370 * FIX: The maximum value is not printed in PA line mode Jira: 5046 4951 Change-Id: Ic81f9a75ce7f088fe950fdde283ff5c942cd6e83 * ENH:add preset check for sending files Change-Id: Ia3313d281b5ce91e277b380498014ffdac5debd3 * FIX: locale loading user preset Change-Id: I88521e4b10cb802d9253eb79a6b78b3286f15a33 Jira: STUDIO-5436 * FIX: sync user preset notify crash on exit Change-Id: I88f5dbcbd487293ea847ea6092efb61744399541 Jira: STUDIO-5413 * ci: update build version to 01.08.01.56 Change-Id: Id7a9718d5f920da50d52fd2ef220acf5d3270d3c * GUI/Field: Fix crash in color picker init (#2220) wxButton->GetBitmap() may return an invalid wxBitmap. Guard against this. * FIX: custom filament preset display in cali history issue jira: new Change-Id: I4145450a231adff542ab1a7428b3479f4074e06a * FIX: meshboolean transform result issue jira: STUDIO-5425 Change-Id: If66fe909ce4458c1b3192e4fd8a3d758fe7c7eaa * FIX: fix combobox and delete btn in filament setting enabled Jira: XXXX Change-Id: I8b659bd77ceb97c8cea9d3e5e931f4ea50822721 * ci: update build version to 01.08.01.57 Change-Id: I7a6f5439863ca81275ae8b80f1b5cf0bb36c4c0f * Fix crashing of flow rate calibration post BS 1.8 merge * Revert Staggered Inner Seam logic from Prusa slicer that was overwritten by the BS1.8 update --------- Signed-off-by: xun.zhang <xun.zhang@bambulab.com> Co-authored-by: xun.zhang <xun.zhang@bambulab.com> Co-authored-by: hu.wang <hu.wang@bambulab.com> Co-authored-by: zhimin.zeng <zhimin.zeng@bambulab.com> Co-authored-by: tao wang <tao.wang@bambulab.com> Co-authored-by: chunmao.guo <chunmao.guo@bambulab.com> Co-authored-by: gerrit <gerrit@bambulab.com> Co-authored-by: mia <652892+mia-0@users.noreply.github.com> Co-authored-by: liz.li <liz.li@bambulab.com> Co-authored-by: maosheng.wei <maosheng.wei@bambulab.com>
80 lines
No EOL
1.8 KiB
JSON
80 lines
No EOL
1.8 KiB
JSON
{
|
|
"type": "filament",
|
|
"name": "Generic PETG-CF @base",
|
|
"inherits": "fdm_filament_pet",
|
|
"from": "system",
|
|
"filament_id": "GFG98",
|
|
"instantiation": "false",
|
|
"cool_plate_temp": [
|
|
"0"
|
|
],
|
|
"cool_plate_temp_initial_layer": [
|
|
"0"
|
|
],
|
|
"eng_plate_temp": [
|
|
"70"
|
|
],
|
|
"eng_plate_temp_initial_layer": [
|
|
"70"
|
|
],
|
|
"fan_max_speed": [
|
|
"30"
|
|
],
|
|
"fan_min_speed": [
|
|
"0"
|
|
],
|
|
"filament_cost": [
|
|
"34.99"
|
|
],
|
|
"filament_density": [
|
|
"1.25"
|
|
],
|
|
"filament_flow_ratio": [
|
|
"0.95"
|
|
],
|
|
"filament_max_volumetric_speed": [
|
|
"12"
|
|
],
|
|
"filament_type": [
|
|
"PETG-CF"
|
|
],
|
|
"filament_vendor": [
|
|
"Generic"
|
|
],
|
|
"hot_plate_temp": [
|
|
"70"
|
|
],
|
|
"hot_plate_temp_initial_layer": [
|
|
"70"
|
|
],
|
|
"nozzle_temperature_range_high": [
|
|
"270"
|
|
],
|
|
"nozzle_temperature_range_low": [
|
|
"240"
|
|
],
|
|
"overhang_fan_speed": [
|
|
"90"
|
|
],
|
|
"overhang_fan_threshold": [
|
|
"10%"
|
|
],
|
|
"required_nozzle_HRC": [
|
|
"40"
|
|
],
|
|
"slow_down_layer_time": [
|
|
"6"
|
|
],
|
|
"temperature_vitrification": [
|
|
"70"
|
|
],
|
|
"textured_plate_temp": [
|
|
"70"
|
|
],
|
|
"textured_plate_temp_initial_layer": [
|
|
"70"
|
|
],
|
|
"filament_start_gcode": [
|
|
"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
|
]
|
|
} |