52cfa48168
add some series of printer parameter configurations. 15 Geeetech printers, including 3 series models. Thunder series. A high-speed printer and the maximum printing speed can reach 300 mm/s. Mizar series. A machine that has very exquisite print quality and ultra quiet printing. Other Geeetech printers. ---Request from Geeetech offical . Co-authored-by: SoftFever <softfeverever@gmail.com>
52 lines
No EOL
2.4 KiB
JSON
52 lines
No EOL
2.4 KiB
JSON
{
|
||
"type": "machine",
|
||
"setting_id": "GM_GEEETECH_025",
|
||
"name": "Geeetech A10 M 0.4 nozzle",
|
||
"from": "system",
|
||
"instantiation": "true",
|
||
"inherits": "fdm_geeetech_common",
|
||
"printer_model": "Geeetech A10 M",
|
||
"default_filament_profile": [
|
||
"Generic PLA @Geeetech"
|
||
],
|
||
"printer_variant": "0.4",
|
||
"default_print_profile": "0.20mm Standard @Geeetech common",
|
||
"nozzle_diameter": [
|
||
"0.4"
|
||
],
|
||
"extruder_type": [
|
||
"Bowden"
|
||
],
|
||
"max_layer_height": [
|
||
"0.3"
|
||
],
|
||
"min_layer_height": [
|
||
"0.07"
|
||
],
|
||
"retraction_length": [
|
||
"6.5"
|
||
],
|
||
"retract_restart_extra": [
|
||
"-0.2"
|
||
],
|
||
"retraction_speed": [
|
||
"25"
|
||
],
|
||
"deretraction_speed": [
|
||
"25"
|
||
],
|
||
"printable_area": [
|
||
"0x0",
|
||
"220x0",
|
||
"220x220",
|
||
"0x220"
|
||
],
|
||
"printable_height": "260",
|
||
"retract_lift_below":[
|
||
"259"
|
||
],
|
||
"machine_start_gcode": ";Geeetech official wiki homepage for A10M：https://www.geeetech.com/wiki/index.php/Geeetech_A10M_3D_printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||
"nozzle_type": "brass",
|
||
"auxiliary_fan": "0"
|
||
} |