2266aa4d98
* ADD RatRig V-Core 500 Printer Profile * ADD Other RatRig Printers ADD V-Core 200/300/400 ADD V-Minion * Add Printers to Filament * Update Ratrig.json * V-Minion correct PNG * Correct Bed File for Printers * Update fdm_process_ratrig_common.json * Filament Settings Update/ Disable Z-Hop /Activate PA with Parameter * Remove Bed Modell The bed model was removed due to a known z bug
70 lines
2.2 KiB
JSON
70 lines
2.2 KiB
JSON
{
|
|
"type": "process",
|
|
"name": "fdm_process_common",
|
|
"from": "system",
|
|
"instantiation": "false",
|
|
"adaptive_layer_height": "0",
|
|
"reduce_crossing_wall": "0",
|
|
"bridge_flow": "0.95",
|
|
"bridge_speed": "25",
|
|
"brim_width": "5",
|
|
"compatible_printers": [],
|
|
"print_sequence": "by layer",
|
|
"default_acceleration": "10000",
|
|
"bridge_no_support": "0",
|
|
"elefant_foot_compensation": "0.1",
|
|
"outer_wall_line_width": "0.4",
|
|
"outer_wall_speed": "120",
|
|
"line_width": "0.45",
|
|
"infill_direction": "45",
|
|
"sparse_infill_density": "15%",
|
|
"sparse_infill_pattern": "grid",
|
|
"initial_layer_line_width": "0.42",
|
|
"initial_layer_print_height": "0.2",
|
|
"initial_layer_speed": "20",
|
|
"gap_infill_speed": "30",
|
|
"infill_combination": "0",
|
|
"sparse_infill_line_width": "0.45",
|
|
"infill_wall_overlap": "25%",
|
|
"sparse_infill_speed": "50",
|
|
"interface_shells": "0",
|
|
"detect_overhang_wall": "0",
|
|
"reduce_infill_retraction": "0",
|
|
"filename_format": "{input_filename_base}.gcode",
|
|
"wall_loops": "3",
|
|
"inner_wall_line_width": "0.45",
|
|
"inner_wall_speed": "40",
|
|
"print_settings_id": "",
|
|
"raft_layers": "0",
|
|
"seam_position": "nearest",
|
|
"skirt_distance": "2",
|
|
"skirt_height": "2",
|
|
"minimum_sparse_infill_area": "0",
|
|
"internal_solid_infill_line_width": "0.45",
|
|
"internal_solid_infill_speed": "40",
|
|
"spiral_mode": "0",
|
|
"standby_temperature_delta": "-5",
|
|
"enable_support": "0",
|
|
"support_filament": "0",
|
|
"support_line_width": "0.42",
|
|
"support_interface_filament": "0",
|
|
"support_on_build_plate_only": "0",
|
|
"support_top_z_distance": "0.15",
|
|
"support_interface_loop_pattern": "0",
|
|
"support_interface_top_layers": "2",
|
|
"support_interface_spacing": "0",
|
|
"support_interface_speed": "80",
|
|
"support_base_pattern": "rectilinear",
|
|
"support_base_pattern_spacing": "2",
|
|
"support_speed": "40",
|
|
"support_threshold_angle": "40",
|
|
"support_object_xy_distance": "0.5",
|
|
"detect_thin_wall": "0",
|
|
"top_surface_line_width": "0.4",
|
|
"top_surface_speed": "30",
|
|
"travel_speed": "400",
|
|
"enable_prime_tower": "0",
|
|
"prime_tower_width": "60",
|
|
"xy_hole_compensation": "0",
|
|
"xy_contour_compensation": "0"
|
|
}
|