fc929ebb17
Profile created based on information contained in the printer's firmware and profiles recommended by the manufacturer for Cura. It has been tested on various parts including 3DBenchy with more than satisfactory results.
114 lines
No EOL
2.8 KiB
JSON
114 lines
No EOL
2.8 KiB
JSON
{
|
|
"type": "machine",
|
|
"setting_id": "GM001",
|
|
"name": "Anycubic Kobra 0.4 nozzle",
|
|
"from": "system",
|
|
"instantiation": "true",
|
|
"inherits": "fdm_machine_common",
|
|
"printer_model": "Anycubic Kobra",
|
|
"default_print_profile": "0.20mm Standard @Anycubic Kobra",
|
|
"nozzle_diameter": [
|
|
"0.4"
|
|
],
|
|
"printable_area": [
|
|
"0x0",
|
|
"220x0",
|
|
"220x220",
|
|
"0x220"
|
|
],
|
|
"printable_height": "250",
|
|
"nozzle_type": "undefined",
|
|
"auxiliary_fan": "0",
|
|
"machine_max_acceleration_extruding": [
|
|
"1000",
|
|
"1000"
|
|
],
|
|
"machine_max_acceleration_retracting": [
|
|
"1000",
|
|
"1000"
|
|
],
|
|
"machine_max_acceleration_travel": [
|
|
"1000",
|
|
"1000"
|
|
],
|
|
"machine_max_acceleration_x": [
|
|
"700",
|
|
"700"
|
|
],
|
|
"machine_max_acceleration_y": [
|
|
"600",
|
|
"600"
|
|
],
|
|
"machine_max_acceleration_z": [
|
|
"50",
|
|
"50"
|
|
],
|
|
"machine_max_speed_e": [
|
|
"80",
|
|
"80"
|
|
],
|
|
"machine_max_speed_x": [
|
|
"300",
|
|
"300"
|
|
],
|
|
"machine_max_speed_y": [
|
|
"250",
|
|
"250"
|
|
],
|
|
"machine_max_speed_z": [
|
|
"20",
|
|
"20"
|
|
],
|
|
"machine_max_jerk_e": [
|
|
"10",
|
|
"10"
|
|
],
|
|
"machine_max_jerk_x": [
|
|
"20",
|
|
"20"
|
|
],
|
|
"machine_max_jerk_y": [
|
|
"20",
|
|
"20"
|
|
],
|
|
"machine_max_jerk_z": [
|
|
"0.6",
|
|
"0.6"
|
|
],
|
|
"max_layer_height": [
|
|
"0.3"
|
|
],
|
|
"min_layer_height": [
|
|
"0.05"
|
|
],
|
|
"printer_settings_id": "Anycubic",
|
|
"retraction_minimum_travel": [
|
|
"1.5"
|
|
],
|
|
"retract_before_wipe": [
|
|
"60%"
|
|
],
|
|
"retraction_length": [
|
|
"6"
|
|
],
|
|
"retract_length_toolchange": [
|
|
"1"
|
|
],
|
|
"retraction_speed": [
|
|
"40"
|
|
],
|
|
"deretraction_speed": [
|
|
"50"
|
|
],
|
|
"single_extruder_multi_material": "1",
|
|
"change_filament_gcode": "M600",
|
|
"machine_pause_gcode": "M601",
|
|
"default_filament_profile": [
|
|
"Anycubic Generic PLA"
|
|
],
|
|
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nG28 ; home all\nG1 Y1.0 Z0.3 F1000 ; move print head up\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nG92 E0.0\n; initial load\nG1 X205.0 E19 F1000\nG1 Y1.6\nG1 X5.0 E19 F1000\nG92 E0.0\n; intro line\nG1 Y2.0 Z0.2 F1000\nG1 X65.0 E9.0 F1000\nG1 X105.0 E12.5 F1000\nG92 E0.0",
|
|
"machine_end_gcode": "G1 E-1.0 F2100 ; retract\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height)}{endif} E-34.0 F720 ; move print head up & retract filament\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y105 F3000 ; park print head\nM84 ; disable motors",
|
|
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n",
|
|
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
|
"scan_first_layer": "0"
|
|
} |