1067fc2649
* 10-25 Add TPU-95A HF * 1030 Adding Introduction of Chamber Temperature Control Macros(M191) to Notes * 1102 Add ABS-GF10 profile， Remove a extra "s" from the "0.36mm Standard @Qidi XPlus3 0.6 nozzle.json" file * 1106 Add the PA value to some genetic filament profiles * Add new filaments profiles Add new filaments profiles * 1 1 * Add two new filaments Add two new filaments * Optimized 0.2mm nozzle profiles Optimized 0.2 mm nozzle QIDI Generic ABS/PETG/PLA profiles * disable prime tower disable prime tower and independent_support_layer_height, Improve some part of the surface when supported * Fix the name issue Fix the name issue
27 lines
921 B
JSON
27 lines
921 B
JSON
{
|
|
"type": "filament",
|
|
"filament_id": "GFB99",
|
|
"setting_id": "GFSA04",
|
|
"name": "Qidi Generic ABS @Qidi X-Smart 3 0.2 nozzle",
|
|
"from": "system",
|
|
"instantiation": "true",
|
|
"inherits": "fdm_filament_abs",
|
|
"filament_flow_ratio": [
|
|
"0.926"
|
|
],
|
|
"enable_pressure_advance": [
|
|
"1"
|
|
],
|
|
"pressure_advance": [
|
|
"0.021"
|
|
],
|
|
"filament_max_volumetric_speed": [
|
|
"2"
|
|
],
|
|
"filament_start_gcode": [
|
|
"; filament start gcode\n{if (bed_temperature[current_extruder] >90)||(bed_temperature_initial_layer[current_extruder] >90)}M106 P3 S0\n{elsif(bed_temperature[current_extruder] >70)||(bed_temperature_initial_layer[current_extruder] >70)}M106 P3 S153\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{endif}"
|
|
],
|
|
"compatible_printers": [
|
|
"Qidi X-Smart 3 0.2 nozzle"
|
|
]
|
|
}
|