52cfa48168
add some series of printer parameter configurations. 15 Geeetech printers, including 3 series models. Thunder series. A high-speed printer and the maximum printing speed can reach 300 mm/s. Mizar series. A machine that has very exquisite print quality and ultra quiet printing. Other Geeetech printers. ---Request from Geeetech offical . Co-authored-by: SoftFever <softfeverever@gmail.com>
71 lines
No EOL
2.3 KiB
JSON
71 lines
No EOL
2.3 KiB
JSON
{
|
|
"type": "process",
|
|
"name": "fdm_process_common",
|
|
"from": "system",
|
|
"instantiation": "false",
|
|
"adaptive_layer_height": "0",
|
|
"reduce_crossing_wall": "0",
|
|
"bridge_flow": "0.95",
|
|
"bridge_speed": "25",
|
|
"brim_width": "5",
|
|
"print_sequence": "by layer",
|
|
"default_acceleration": "500",
|
|
"bridge_no_support": "0",
|
|
"elefant_foot_compensation": "0.1",
|
|
"outer_wall_line_width": "0.42",
|
|
"outer_wall_speed": "120",
|
|
"line_width": "0.45",
|
|
"infill_direction": "45",
|
|
"sparse_infill_density": "15%",
|
|
"sparse_infill_pattern": "grid",
|
|
"initial_layer_line_width": "0.42",
|
|
"initial_layer_print_height": "0.2",
|
|
"initial_layer_speed": "20",
|
|
"gap_infill_speed": "30",
|
|
"infill_combination": "0",
|
|
"sparse_infill_line_width": "0.45",
|
|
"infill_wall_overlap": "15%",
|
|
"sparse_infill_speed": "50",
|
|
"interface_shells": "0",
|
|
"detect_overhang_wall": "0",
|
|
"reduce_infill_retraction": "0",
|
|
"filename_format": "{input_filename_base}.gcode",
|
|
"wall_loops": "2",
|
|
"inner_wall_line_width": "0.45",
|
|
"inner_wall_speed": "40",
|
|
"print_settings_id": "",
|
|
"raft_layers": "0",
|
|
"seam_position": "nearest",
|
|
"skirt_distance": "2",
|
|
"skirt_height": "2",
|
|
"minimum_sparse_infill_area": "0",
|
|
"internal_solid_infill_line_width": "0.45",
|
|
"internal_solid_infill_speed": "40",
|
|
"spiral_mode": "0",
|
|
"standby_temperature_delta": "-5",
|
|
"enable_support": "0",
|
|
"support_filament": "0",
|
|
"support_line_width": "0.42",
|
|
"support_interface_filament": "0",
|
|
"support_on_build_plate_only": "0",
|
|
"support_top_z_distance": "0.15",
|
|
"support_interface_loop_pattern": "0",
|
|
"support_interface_top_layers": "2",
|
|
"support_interface_spacing": "0",
|
|
"support_interface_speed": "80",
|
|
"support_interface_pattern": "auto",
|
|
"support_base_pattern": "default",
|
|
"support_base_pattern_spacing": "2",
|
|
"support_speed": "40",
|
|
"support_threshold_angle": "40",
|
|
"support_object_xy_distance": "0.5",
|
|
"detect_thin_wall": "0",
|
|
"top_surface_line_width": "0.42",
|
|
"top_surface_speed": "30",
|
|
"travel_speed": "400",
|
|
"enable_prime_tower": "0",
|
|
"prime_tower_width": "60",
|
|
"xy_hole_compensation": "0",
|
|
"xy_contour_compensation": "0",
|
|
"compatible_printers": []
|
|
} |