orcaslicer/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL X1C.json
Asim Siddiqui 77b8272c6a
Added SUNLU filaments for Bambu Lab printers (#7890)
Added SUNLU PLA Matte, PLA+, PLA+ 2.0, Silk PLA+, Wood PLA, Marble PLA and PETG filaments for Bambu Lab printers

Co-authored-by: SoftFever <softfeverever@gmail.com>
2025-01-07 23:28:41 +08:00

28 lines
No EOL
1.3 KiB
JSON

{
"type": "filament",
"name": "SUNLU PLA Marble @BBL X1C",
"inherits": "SUNLU PLA Marble @base",
"from": "system",
"setting_id": "SNLS06",
"instantiation": "true",
"filament_long_retractions_when_cut": [
"1"
],
"filament_retraction_distances_when_cut": [
"18"
],
"compatible_printers": [
"Bambu Lab X1 Carbon 0.4 nozzle",
"Bambu Lab X1 Carbon 0.6 nozzle",
"Bambu Lab X1 Carbon 0.8 nozzle",
"Bambu Lab P1S 0.4 nozzle",
"Bambu Lab P1S 0.6 nozzle",
"Bambu Lab P1S 0.8 nozzle",
"Bambu Lab X1E 0.4 nozzle",
"Bambu Lab X1E 0.6 nozzle",
"Bambu Lab X1E 0.8 nozzle"
],
"filament_start_gcode": [
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
]
}