42 lines
No EOL
1.4 KiB
JSON
42 lines
No EOL
1.4 KiB
JSON
{
|
|
"type": "filament",
|
|
"name": "Bambu PLA Silk @base",
|
|
"inherits": "fdm_filament_pla",
|
|
"from": "system",
|
|
"filament_id": "GFA05",
|
|
"instantiation": "false",
|
|
"description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
|
|
"filament_cost": [
|
|
"29.99"
|
|
],
|
|
"filament_density": [
|
|
"1.32"
|
|
],
|
|
"filament_flow_ratio": [
|
|
"0.98"
|
|
],
|
|
"filament_vendor": [
|
|
"Bambu Lab"
|
|
],
|
|
"filament_scarf_height": [
|
|
"5%"
|
|
],
|
|
"filament_scarf_gap": [
|
|
"0%"
|
|
],
|
|
"nozzle_temperature": [
|
|
"230"
|
|
],
|
|
"nozzle_temperature_initial_layer": [
|
|
"230"
|
|
],
|
|
"supertack_plate_temp": [
|
|
"0"
|
|
],
|
|
"supertack_plate_temp_initial_layer": [
|
|
"0"
|
|
],
|
|
"filament_start_gcode": [
|
|
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
|
]
|
|
} |