amd/orcaslicer
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions 1
orcaslicer/bbl/i18n/BambuStudio.pot
salt.wei 4172ad8a8e ENH: some po change for new settings 
Some po change for new setting option

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I804355868ff2507b038d3c163ba5c4ce30901f7f
2022-10-20 19:34:37 +08:00

6562 lines
108 KiB
Text
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2022-10-13 20:53+0800\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n"
msgid "Supports Painting"
msgstr ""
msgid "Section view"
msgstr ""
msgid "Pen size"
msgstr ""
msgid "Left mouse button"
msgstr ""
msgid "Enforce supports"
msgstr ""
msgid "Right mouse button"
msgstr ""
msgid "Block supports"
msgstr ""
msgid "Shift + Left mouse button"
msgstr ""
msgid "Erase painting"
msgstr ""
msgid "Erase all painting"
msgstr ""
msgid "Highlight overhang areas"
msgstr ""
msgid "Gap fill"
msgstr ""
msgid "Perform"
msgstr ""
msgid "Gap area"
msgstr ""
msgid "Set pen size"
msgstr ""
msgid "Ctrl + Mouse wheel"
msgstr ""
msgid "Tool type"
msgstr ""
msgid "Smart fill angle"
msgstr ""
msgid "Auto support threshold angle: "
msgstr ""
msgid "Circle"
msgstr ""
msgid "Sphere"
msgstr ""
msgid "Fill"
msgstr ""
msgid "Gap Fill"
msgstr ""
msgid "Highlight faces according to overhang angle."
msgstr ""
msgid "No auto support"
msgstr ""
msgid "Support Generated"
msgstr ""
msgid "Lay on face"
msgstr ""
#, possible-boost-format
msgid ""
"Filament count exceeds the maximum number that painting tool supports. only "
"the first %1% filaments will be available in painting tool."
msgstr ""
msgid "Color Painting"
msgstr ""
msgid "Pen shape"
msgstr ""
msgid "Paint"
msgstr ""
msgid "Erase"
msgstr ""
msgid "Key 1~9"
msgstr ""
msgid "Choose filament"
msgstr ""
msgid "Edge detection"
msgstr ""
msgid "Triangles"
msgstr ""
msgid "Filaments"
msgstr ""
msgid "Brush"
msgstr ""
msgid "Smart fill"
msgstr ""
msgid "Bucket fill"
msgstr ""
msgid "Height range"
msgstr ""
msgid "Shortcut Key "
msgstr ""
msgid "Triangle"
msgstr ""
msgid "Height Range"
msgstr ""
msgid "Remove painted color"
msgstr ""
#, possible-boost-format
msgid "Painted using: Filament %1%"
msgstr ""
msgid "Move"
msgstr ""
msgid "Rotate"
msgstr ""
msgid "Optimize orientation"
msgstr ""
msgid "Apply"
msgstr ""
msgid "Scale"
msgstr ""
msgid "Error: Please close all toolbar menus first"
msgstr ""
msgid "Tool-Lay on Face"
msgstr ""
msgid "in"
msgstr ""
msgid "mm"
msgstr ""
msgid "Position"
msgstr ""
msgid "Rotation"
msgstr ""
msgid "Scale ratios"
msgstr ""
msgid "Object Operations"
msgstr ""
msgid "Volume Operations"
msgstr ""
msgid "Translate"
msgstr ""
msgid "Group Operations"
msgstr ""
msgid "Set Position"
msgstr ""
msgid "Set Orientation"
msgstr ""
msgid "Set Scale"
msgstr ""
msgid "Reset Position"
msgstr ""
msgid "Reset Rotation"
msgstr ""
msgid "World coordinates"
msgstr ""
msgid "°"
msgstr ""
msgid "Size"
msgstr ""
msgid "%"
msgstr ""
msgid "uniform scale"
msgstr ""
msgid "Cut"
msgstr ""
msgid "Movement:"
msgstr ""
msgid "Rotation:"
msgstr ""
msgid "Height:"
msgstr ""
msgid "Keep upper part"
msgstr ""
msgid "Keep lower part"
msgstr ""
msgid "Cut to parts"
msgstr ""
msgid "Auto Segment"
msgstr ""
msgid "Perform cut"
msgstr ""
msgid "Reset"
msgstr ""
msgid "Mesh name"
msgstr ""
msgid "Detail level"
msgstr ""
msgid "Decimate ratio"
msgstr ""
#, possible-boost-format
msgid ""
"Processing model '%1%' with more than 1M triangles could be slow. It is "
"highly recommended to simplify the model."
msgstr ""
msgid "Simplify model"
msgstr ""
msgid "Simplify"
msgstr ""
msgid "Simplification is currently only allowed when a single part is selected"
msgstr ""
msgid "Error"
msgstr ""
msgid "Extra high"
msgstr ""
msgid "High"
msgstr ""
msgid "Medium"
msgstr ""
msgid "Low"
msgstr ""
msgid "Extra low"
msgstr ""
#, possible-c-format, possible-boost-format
msgid "%d triangles"
msgstr ""
msgid "Show wireframe"
msgstr ""
#, possible-boost-format
msgid "%1%"
msgstr ""
msgid "Can't apply when proccess preview."
msgstr ""
msgid "Cancel"
msgstr ""
msgid "Operation already cancelling. Please wait few seconds."
msgstr ""
msgid "Face recognition"
msgstr ""
msgid "Perform Recognition"
msgstr ""
msgid "Reset direction"
msgstr ""
msgid "Brush size"
msgstr ""
msgid "Brush shape"
msgstr ""
msgid "Enforce seam"
msgstr ""
msgid "Block seam"
msgstr ""
msgid "Remove selection"
msgstr ""
msgid "Seam painting"
msgstr ""
msgid "Entering Seam painting"
msgstr ""
msgid "Leaving Seam painting"
msgstr ""
msgid "Paint-on seam editing"
msgstr ""
msgid "Text shape"
msgstr ""
msgid "Font"
msgstr ""
msgid "Thickness"
msgstr ""
msgid "Input text"
msgstr ""
msgid "Add"
msgstr ""
msgid "Notice"
msgstr ""
msgid "Warning"
msgstr ""
msgid "Undefined"
msgstr ""
#, possible-boost-format
msgid "%1% was replaced with %2%"
msgstr ""
msgid "The configuration may be generated by a newer version of BambuStudio."
msgstr ""
msgid "Some values have been replaced. Please check them:"
msgstr ""
msgid "Process"
msgstr ""
msgid "Filament"
msgstr ""
msgid "Machine"
msgstr ""
msgid "Configuration package was loaded, but some values were not recognized."
msgstr ""
#, possible-boost-format
msgid ""
"Configuration file \"%1%\" was loaded, but some values were not recognized."
msgstr ""
msgid "V"
msgstr ""
msgid "Internal Version"
msgstr ""
msgid "Version"
msgstr ""
msgid ""
"BambuStudio will terminate because of running out of memory.It may be a bug. "
"It will be appreciated if you report the issue to our team."
msgstr ""
msgid "Fatal error"
msgstr ""
msgid ""
"BambuStudio will terminate because of a localization error. It will be "
"appreciated if you report the specific scenario this issue happened."
msgstr ""
msgid "Critical error"
msgstr ""
#, possible-boost-format
msgid "BambuStudio got an unhandled exception: %1%"
msgstr ""
msgid "Downloading Bambu Network Plug-in"
msgstr ""
msgid "Incorrect password"
msgstr ""
#, possible-c-format, possible-boost-format
msgid "Connect %s failed! [SN:%s, code=%s]"
msgstr ""
msgid ""
"BambuStudio configuration file may be corrupted and is not abled to be "
"parsed.Please delete the file and try again."
msgstr ""
#, possible-c-format, possible-boost-format
msgid ""
"%s\n"
"Do you want to continue?"
msgstr ""
msgid "Remember my choice"
msgstr ""
msgid "Loading configuration"
msgstr ""
#, possible-c-format, possible-boost-format
msgid "Click to download new version in default browser: %s"
msgstr ""
msgid "The Bambu Studio needs an upgrade"
msgstr ""
msgid "This is the newest version."
msgstr ""
msgid "Info"
msgstr ""
msgid "Loading user presets..."
msgstr ""
msgid "Rebuild"
msgstr ""
msgid "Loading current presets"
msgstr ""
msgid "Loading a mode view"
msgstr ""
msgid "Choose one file (3mf):"
msgstr ""
msgid "Choose one or more files (3mf/step/stl/obj/amf):"
msgstr ""
msgid "Choose one file (gcode/.gco/.g/.ngc/ngc):"
msgstr ""
msgid "Some presets are modified."
msgstr ""
msgid ""
"You can keep the modifield presets to the new project, discard or save "
"changes as new presets."
msgstr ""
msgid "User logged out"
msgstr ""
msgid "new or open project file is not allowed during the slicing process!"
msgstr ""
msgid "Open Project"
msgstr ""
msgid ""
"The version of Bambu studio is too low and needs to be updated to the latest "
"version before it can be used normally"
msgstr ""
msgid "Login information expired. Please login again."
msgstr ""
msgid "Loading"
msgstr ""
msgid "Loading user preset"
msgstr ""
msgid "Switching application language"
msgstr ""
msgid "Select the language"
msgstr ""
msgid "Language"
msgstr ""
msgid "*"
msgstr ""
msgid "The uploads are still ongoing"
msgstr ""
msgid "Stop them and continue anyway?"
msgstr ""
msgid "Ongoing uploads"
msgstr ""
msgid "Select a G-code file:"
msgstr ""
msgid "Bambu Studio GUI initialization failed"
msgstr ""
#, possible-boost-format
msgid "Fatal error, exception catched: %1%"
msgstr ""
msgid "Quality"
msgstr ""
msgid "Shell"
msgstr ""
msgid "Infill"
msgstr ""
msgid "Support"
msgstr ""
msgid "Speed"
msgstr ""
msgid "Strength"
msgstr ""
msgid "Top Solid Layers"
msgstr ""
msgid "Top Minimum Shell Thickness"
msgstr ""
msgid "Bottom Solid Layers"
msgstr ""
msgid "Bottom Minimum Shell Thickness"
msgstr ""
msgid "Ironing"
msgstr ""
msgid "Fuzzy Skin"
msgstr ""
msgid "Extruders"
msgstr ""
msgid "Extrusion Width"
msgstr ""
msgid "Wipe options"
msgstr ""
msgid "Bed adhension"
msgstr ""
msgid "Advanced"
msgstr ""
msgid "Add part"
msgstr ""
msgid "Add negative part"
msgstr ""
msgid "Add modifier"
msgstr ""
msgid "Add support blocker"
msgstr ""
msgid "Add support enforcer"
msgstr ""
msgid "Select settings"
msgstr ""
msgid "Delete"
msgstr ""
msgid "Delete the selected object"
msgstr ""
msgid "Load..."
msgstr ""
msgid "Cube"
msgstr ""
msgid "Cylinder"
msgstr ""
msgid "Cone"
msgstr ""
msgid "Add settings"
msgstr ""
msgid "Change type"
msgstr ""
msgid "Set as an individual object"
msgstr ""
msgid "Set as individual objects"
msgstr ""
msgid "Printable"
msgstr ""
msgid "Rename"
msgstr ""
msgid "Fix model"
msgstr ""
msgid "Export as STL"
msgstr ""
msgid "Reload from disk"
msgstr ""
msgid "Reload the selected parts from disk"
msgstr ""
msgid "Replace with STL"
msgstr ""
msgid "Replace the selected part with new STL"
msgstr ""
msgid "Change filament"
msgstr ""
msgid "Set filament for selected items"
msgstr ""
msgid "Default"
msgstr ""
#, possible-c-format, possible-boost-format
msgid "Filament %d"
msgstr ""
msgid "active"
msgstr ""
msgid "Scale to build volume"
msgstr ""
msgid "Scale an object to fit the build volume"
msgstr ""
msgid "Convert from inch"
msgstr ""
msgid "Restore to inch"
msgstr ""
msgid "Convert from meter"
msgstr ""
msgid "Restore to meter"
msgstr ""
msgid "Assemble"
msgstr ""
msgid "Assemble the selected objects to an object with multiple parts"
msgstr ""
msgid "Assemble the selected objects to an object with single part"
msgstr ""
msgid "Assemble the selected parts to a single part"
msgstr ""
msgid "Along X axis"
msgstr ""
msgid "Mirror along the X axis"
msgstr ""
msgid "Along Y axis"
msgstr ""
msgid "Mirror along the Y axis"
msgstr ""
msgid "Along Z axis"
msgstr ""
msgid "Mirror along the Z axis"
msgstr ""
msgid "Mirror"
msgstr ""
msgid "Mirror object"
msgstr ""
msgid "Add Primitive"
msgstr ""
msgid "To objects"
msgstr ""
msgid "Split the selected object into multiple objects"
msgstr ""
msgid "To parts"
msgstr ""
msgid "Split the selected object into multiple parts"
msgstr ""
msgid "Split"
msgstr ""
msgid "Split the selected object"
msgstr ""
msgid "Auto orientation"
msgstr ""
msgid "Auto orient the object to improve print quality."
msgstr ""
msgid "Split the selected object into mutiple objects"
msgstr ""
msgid "Split the selected object into mutiple parts"
msgstr ""
msgid "Select All"
msgstr ""
msgid "select all objects on current plate"
msgstr ""
msgid "Delete All"
msgstr ""
msgid "delete all objects on current plate"
msgstr ""
msgid "Arrange"
msgstr ""
msgid "arrange current plate"
msgstr ""
msgid "Auto Rotate"
msgstr ""
msgid "auto rotate current plate"
msgstr ""
msgid "Remove the selected plate"
msgstr ""
msgid "Clone"
msgstr ""
msgid "Simplify Model"
msgstr ""
msgid "Center"
msgstr ""
msgid "Edit in Parameter Table"
msgstr ""
msgid "Edit print parameters for a single object"
msgstr ""
msgid "Change Filament"
msgstr ""
msgid "Set Filament for selected items"
msgstr ""
msgid "current"
msgstr ""
msgid "Set Unprintable"
msgstr ""
msgid "Set Printable"
msgstr ""
msgid "Unlock"
msgstr ""
msgid "Lock"
msgstr ""
msgid "Name"
msgstr ""
msgid "Fila."
msgstr ""
#, possible-c-format, possible-boost-format
msgid "%1$d error repaired"
msgid_plural "%1$d errors repaired"
msgstr[0] ""
msgstr[1] ""
#, possible-c-format, possible-boost-format
msgid "Error: %1$d non-manifold edge."
msgid_plural "Error: %1$d non-manifold edges."
msgstr[0] ""
msgstr[1] ""
msgid "Remaining errors"
msgstr ""
#, possible-c-format, possible-boost-format
msgid "%1$d non-manifold edge"
msgid_plural "%1$d non-manifold edges"
msgstr[0] ""
msgstr[1] ""
msgid "Right click the icon to fix model object"
msgstr ""
msgid "Right button click the icon to drop the object settings"
msgstr ""
msgid "Click the icon to reset all settings of the object"
msgstr ""
msgid "Right button click the icon to drop the object printable property"
msgstr ""
msgid "Click the icon to toggle printable property of the object"
msgstr ""
msgid "Click the icon to edit support painting of the object"
msgstr ""
msgid "Click the icon to edit color painting of the object"
msgstr ""
msgid "Loading file"
msgstr ""
msgid "Error!"
msgstr ""
msgid "Generic"
msgstr ""
msgid "Add Modifier"
msgstr ""
msgid "Deleting the last solid part is not allowed."
msgstr ""
msgid "The target object contains only one part and can not be splited."
msgstr ""
msgid "Assembly"
msgstr ""
msgid "Object"
msgstr ""
msgid "Part"
msgstr ""
msgid "Layer"
msgstr ""
msgid "Selection conflicts"
msgstr ""
msgid ""
"If first selected item is an object, the second one should also be object."
msgstr ""
msgid ""
"If first selected item is a part, the second one should be part in the same "
"object."
msgstr ""
msgid "The type of the last solid object part is not to be changed."
msgstr ""
msgid "Negative Part"
msgstr ""
msgid "Modifier"
msgstr ""
msgid "Support Blocker"
msgstr ""
msgid "Support Enforcer"
msgstr ""
msgid "Type:"
msgstr ""
msgid "Choose part type"
msgstr ""
msgid "Enter new name"
msgstr ""
msgid "Renaming"
msgstr ""
msgid "Repairing model object"
msgstr ""
msgid "Following model object has been repaired"
msgid_plural "Following model objects have been repaired"
msgstr[0] ""
msgstr[1] ""
msgid "Failed to repair folowing model object"
msgid_plural "Failed to repair folowing model objects"
msgstr[0] ""
msgstr[1] ""
msgid "Repairing was canceled"
msgstr ""
msgid "Additional process preset"
msgstr ""
msgid "Remove parameter"
msgstr ""
msgid "one cell can only be copied to one or multiple cells in the same column"
msgstr ""
msgid "multiple cells copy is not supported"
msgstr ""
msgid "Outside"
msgstr ""
msgid "Auto"
msgstr ""
msgid "Manual"
msgstr ""
msgid "No-brim"
msgstr ""
msgid " "
msgstr ""
msgid "Layer height"
msgstr ""
msgid "Wall loops"
msgstr ""
msgid "Infill density(%)"
msgstr ""
msgid "Auto Brim"
msgstr ""
msgid "Outer wall speed"
msgstr ""
msgid "Plate"
msgstr ""
msgid "Brim"
msgstr ""
msgid "Object/Part Setting"
msgstr ""
msgid "Reset parameter"
msgstr ""
msgid "Multicolor Print"
msgstr ""
msgid "Line Type"
msgstr ""
msgid "No printer"
msgstr ""
msgid "Heat the nozzle to target temperature"
msgstr ""
msgid "Cut filament"
msgstr ""
msgid "Pull back current filament"
msgstr ""
msgid "Push new filament into extruder"
msgstr ""
msgid "Purge old filament"
msgstr ""
msgid "?"
msgstr ""
msgid "Empty"
msgstr ""
msgid "Click the pencil icon to edit the filament."
msgstr ""
msgid "Load Filament"
msgstr ""
msgid "Unload Filament"
msgstr ""
msgid "Tips"
msgstr ""
msgid "AMS Settings"
msgstr ""
msgid "Calibrating AMS..."
msgstr ""
msgid "A problem occured during calibration. Click to view the solution."
msgstr ""
msgid "Calibrate again"
msgstr ""
msgid "Cancel calibration"
msgstr ""
msgid ""
"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically "
"load or unload filiament."
msgstr ""
msgid "Edit"
msgstr ""
msgid ""
"All the selected objects are on the locked plate,\n"
"We can not do auto-arrange on these objects."
msgstr ""
msgid "No arrangable objects are selected."
msgstr ""
msgid ""
"This plate is locked,\n"
"We can not do auto-arrange on this plate."
msgstr ""
msgid "Arranging..."
msgstr ""
msgid ""
"Arrange failed. Found some exceptions when processing object geometries."
msgstr ""
msgid "Arranging"
msgstr ""
msgid "Arranging canceled."
msgstr ""
msgid ""
"Arranging is done but there are unpacked items. Reduce spacing and try again."
msgstr ""
msgid "Arranging done."
msgstr ""
#, possible-c-format, possible-boost-format
msgid ""
"Arrangement ignored the following objects which can't fit into a single "
"bed:\n"
"%s"
msgstr ""
msgid ""
"All the selected objects are on the locked plate,\n"
"We can not do auto-orient on these objects."
msgstr ""
msgid ""
"This plate is locked,\n"
"We can not do auto-orient on this plate."
msgstr ""
msgid "Orienting..."
msgstr ""
msgid "Orienting"
msgstr ""
msgid "Error! Unable to create thread!"
msgstr ""
msgid "Exception"
msgstr ""
msgid "Logging in"
msgstr ""
msgid "Login failed"
msgstr ""
msgid "The region parameter is incorrrect"
msgstr ""
msgid "Failure of printer login"
msgstr ""
msgid "Failed to get ticket"
msgstr ""
msgid "User authorization timeout"
msgstr ""
msgid "Failure of bind"
msgstr ""
msgid "Unknown Failure"
msgstr ""
msgid "Abnormal print file data. Please slice again"
msgstr ""
msgid "Task canceled"
msgstr ""
msgid "Upload task timed out. Please check the network problem and try again"
msgstr ""
msgid "Cloud service connection failed. Please try again."
msgstr ""
msgid "Print file not found, please slice again"
msgstr ""
msgid ""
"The print file exceeds the maximum allowable size (1GB). Please simplify the "
"model and slice again"
msgstr ""
msgid "Failed uploading print file"
msgstr ""
msgid "Wrong Access code"
msgstr ""
msgid "Sending print job over LAN"
msgstr ""
msgid "Sending print job through cloud service"
msgstr ""
msgid "Service Unavailable"
msgstr ""
msgid "Unkown Error."
msgstr ""
msgid "Sending print configuration"
msgstr ""
#, possible-c-format, possible-boost-format
msgid "Successfully sent. Will automatically jump to the device page in %s s"
msgstr ""
msgid "An SD card needs to be inserted before printing via LAN."
msgstr ""
msgid "Downloading"
msgstr ""
msgid "Download failed"
msgstr ""
msgid "Cancelled"
msgstr ""
msgid "Finish"
msgstr ""
msgid "Installing"
msgstr ""
msgid "Install failed"
msgstr ""
msgid "Portions copyright"
msgstr ""
msgid "Copyright"
msgstr ""
msgid "License"
msgstr ""
msgid "Bambu Studio is licensed under "
msgstr ""
msgid "GNU Affero General Public License, version 3"
msgstr ""
msgid ""
"Bambu Studio is based on PrusaSlicer by Prusa Research, which is from Slic3r "
"by Alessandro Ranellucci and the RepRap community"
msgstr ""
msgid "Libraries"
msgstr ""
msgid ""
"This software uses open source components whose copyright and other "
"proprietary rights belong to their respective owners"
msgstr ""
#, possible-c-format, possible-boost-format
msgid "About %s"
msgstr ""
msgid ""
"Bambu Studio is based on PrusaSlicer by PrusaResearch and SuperSlicer by "
"Merill(supermerill)."
msgstr ""
msgid "PrusaSlicer is originally based on Slic3r by Alessandro Ranellucci."
msgstr ""
msgid ""
"Slic3r was created by Alessandro Ranellucci with the help of many other "
"contributors."
msgstr ""
msgid "Bambu Studio also referenced some ideas from Cura by Ultimaker."
msgstr ""
msgid ""
"There many parts of the software that come from community contributions, so "
"we're unable to list them one-by-one, and instead, they'll be attributed in "
"the corresponding code comments."
msgstr ""
msgid "AMS Materials Setting"
msgstr ""
msgid "Colour"
msgstr ""
msgid ""
"Nozzle\n"
"Temperature"
msgstr ""
msgid "max"
msgstr ""
msgid "min"
msgstr ""
#, possible-boost-format
msgid "The input value should be greater than %1% and less than %2%"
msgstr ""
msgid "SN"
msgstr ""
msgid "Confirm"
msgstr ""
msgid "Close"
msgstr ""
msgid "AMS Slots"
msgstr ""
msgid ""
"Note: Only the AMS slots loaded with the same material type can be selected."
msgstr ""
msgid "Enable AMS"
msgstr ""
msgid "Print with filaments in the AMS"
msgstr ""
msgid "Disable AMS"
msgstr ""
msgid "Print with the filament mounted on the back of chassis"
msgstr ""
msgid "Insertion update"
msgstr ""
msgid ""
"The AMS will automatically read the filament information when inserting a "
"new Bambu Lab filament. This takes about 20 seconds."
msgstr ""
msgid ""
"Note: if new filament is inserted during printing, the AMS will not "
"automatically read any information until printing is completed."
msgstr ""
msgid ""
"When inserting a new filament, the AMS will not automatically read its "
"information, leaving it blank for you to enter manually."
msgstr ""
msgid "Power on update"
msgstr ""
msgid ""
"The AMS will automatically read the information of inserted filament on "
"start-up. It will take about 1 minute.The reading process will roll filament "
"spools."
msgstr ""
msgid ""
"The AMS will not automatically read information from inserted filament "
"during startup and will continue to use the information recorded before the "
"last shutdown."
msgstr ""
msgid "File"
msgstr ""
msgid "Please home all axes (click "
msgstr ""
msgid ""
") to locate the toolhead's position. This prevents device moving beyond the "
"printable boundary and causing equipment wear."
msgstr ""
msgid "Go Home"
msgstr ""
msgid ""
"A error occurred. Maybe memory of system is not enough or it's a bug of the "
"program"
msgstr ""
msgid "Please save project and restart the program. "
msgstr ""
msgid "Processing G-Code from Previous file..."
msgstr ""
msgid "Slicing complete"
msgstr ""
msgid "Access violation"
msgstr ""
msgid "Illegal instruction"
msgstr ""
msgid "Divide by zero"
msgstr ""
msgid "Overflow"
msgstr ""
msgid "Underflow"
msgstr ""
msgid "Floating reserved operand"
msgstr ""
msgid "Stack overflow"
msgstr ""
msgid "Unknown error when export G-code."
msgstr ""
#, possible-boost-format
msgid ""
"Failed to save gcode file.\n"
"Error message: %1%.\n"
"Source file %2%."
msgstr ""
#, possible-boost-format
msgid "Succeed to export G-code to %1%"
msgstr ""
msgid "Running post-processing scripts"
msgstr ""
msgid "Copying of the temporary G-code to the output G-code failed"
msgstr ""
#, possible-boost-format
msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue"
msgstr ""
msgid "Origin"
msgstr ""
msgid "Diameter"
msgstr ""
msgid "Size in X and Y of the rectangular plate."
msgstr ""
msgid ""
"Distance of the 0,0 G-code coordinate from the front left corner of the "
"rectangle."
msgstr ""
msgid ""
"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
"center."
msgstr ""
msgid "Rectangular"
msgstr ""
msgid "Circular"
msgstr ""
msgid "Custom"
msgstr ""
msgid "Shape"
msgstr ""
msgid "Load shape from STL..."
msgstr ""
msgid "Settings"
msgstr ""
msgid "Texture"
msgstr ""
msgid "Remove"
msgstr ""
msgid "Not found:"
msgstr ""
msgid "Model"
msgstr ""
msgid "Choose an STL file to import bed shape from:"
msgstr ""
msgid "Invalid file format."
msgstr ""
msgid "Error! Invalid model"
msgstr ""
msgid "The selected file contains no geometry."
msgstr ""
msgid ""
"The selected file contains several disjoint areas. This is not supported."
msgstr ""
msgid "Choose a file to import bed texture from (PNG/SVG):"
msgstr ""
msgid "Choose an STL file to import bed model from:"
msgstr ""
msgid "Bed Shape"
msgstr ""
msgid ""
"Nozzle may be blocked when the temperature is out of recommended range.\n"
"Please make sure whether to use the temperature to print.\n"
"\n"
msgstr ""
#, possible-c-format, possible-boost-format
msgid ""
"Recommended nozzle temperature of this filament type is [%d, %d] degree "
"centigrade"
msgstr ""
#, possible-c-format, possible-boost-format
msgid ""
"Bed temperature of other layer is lower than bed temperature of initial "
"layer for more than %d degree centigrade.\n"
"This may cause model broken free from build plate during printing"
msgstr ""
msgid ""
"Bed temperature is higher than vitrification temperature of this filament.\n"
"This may cause nozzle blocked and printing failure\n"
"Please keep the printer open during the printing process to ensure air "
"circulation or reduce the temperature of the hot bed"
msgstr ""
msgid ""
"Too small layer height.\n"
"Reset to 0.2"
msgstr ""
msgid ""
"Too large layer height.\n"
"Reset to 0.2"
msgstr ""
msgid ""
"Too small ironing spacing.\n"
"Reset to 0.1"
msgstr ""
msgid ""
"Zero initial layer height is invalid.\n"
"\n"
"The first layer height will be reset to 0.2."
msgstr ""
msgid ""
"This setting is only used for model size tunning with small value in some "
"cases.\n"
"For example, when model size has small error and hard to be assembled.\n"
"For large size tuning, please use model scale function.\n"
"\n"
"The value will be reset to 0."
msgstr ""
msgid ""
"Too large elefant foot compensation is unreasonable.\n"
"If really have serious elephant foot effect, please check other settings.\n"
"For example, whether bed temperature is too high.\n"
"\n"
"The value will be reset to 0."
msgstr ""
msgid ""
"Spiral mode only works when wall loops is 1, \n"
"support is disabled, top shell layers is 0 and sparse infill density is 0\n"
msgstr ""
msgid ""
"Change these settings automatically? \n"
"Yes - Change these settings and enable spiral mode automatically\n"
"No - Give up using spiral mode this time"
msgstr ""
msgid ""
"Prime tower does not work when Adaptive Layer Height or Independent Support "
"Layer Height is on.\n"
"Which do you want to keep?\n"
"YES - Keep Prime Tower\n"
"NO - Keep Adaptive Layer Height and Independent Support Layer Height"
msgstr ""
msgid ""
"Prime tower does not work when Adaptive Layer Height is on.\n"
"Which do you want to keep?\n"
"YES - Keep Prime Tower\n"
"NO - Keep Adaptive Layer Height"
msgstr ""
msgid ""
"Prime tower does not work when Independent Support Layer Height is on.\n"
"Which do you want to keep?\n"
"YES - Keep Prime Tower\n"
"NO - Keep Independent Support Layer Height"
msgstr ""
#, possible-boost-format
msgid "%1% infill pattern doesn't support 100%% density."
msgstr ""
msgid ""
"Switch to rectilinear pattern?\n"
"Yes - switch to rectilinear pattern automaticlly\n"
"No - reset density to default non 100% value automaticlly\n"
msgstr ""
msgid "Auto bed leveling"
msgstr ""
msgid "Heatbed preheating"
msgstr ""
msgid "Sweeping XY mech mode"
msgstr ""
msgid "Changing filament"
msgstr ""
msgid "M400 pause"
msgstr ""
msgid "Paused due to filament runout"
msgstr ""
msgid "Heating hotend"
msgstr ""
msgid "Calibrating extrusion"
msgstr ""
msgid "Scanning bed surface"
msgstr ""
msgid "Inspecting first layer"
msgstr ""
msgid "Identifying build plate type"
msgstr ""
msgid "Calibrating Micro Lidar"
msgstr ""
msgid "Homing toolhead"
msgstr ""
msgid "Cleaning nozzle tip"
msgstr ""
msgid "Checking extruder temperature"
msgstr ""
msgid "Printing was paused by the user"
msgstr ""
msgid "Pause of front cover falling"
msgstr ""
msgid "Calibrating the micro lida"
msgstr ""
msgid "Calibrating extrusion flow"
msgstr ""
msgid "Paused due to nozzle temperature malfunction"
msgstr ""
msgid "Paused due to heat bed temperature malfunction"
msgstr ""
msgid "MC"
msgstr ""
msgid "MainBoard"
msgstr ""
msgid "AMS"
msgstr ""
msgid "TH"
msgstr ""
msgid "XCam"
msgstr ""
msgid "Unknown"
msgstr ""
msgid "Fatal"
msgstr ""
msgid "Serious"
msgstr ""
msgid "Common"
msgstr ""
msgid "Update successful."
msgstr ""
msgid "Downloading failed."
msgstr ""
msgid "Verification failed."
msgstr ""
msgid "Update failed."
msgstr ""
msgid "Failed to start printing job"
msgstr ""
msgid "parameter name"
msgstr ""
msgid "N/A"
msgstr ""
msgid "Invalid numeric."
msgstr ""
#, possible-c-format, possible-boost-format
msgid "%s can't be percentage"
msgstr ""
#, possible-c-format, possible-boost-format
msgid "Value %s is out of range, continue?"
msgstr ""
msgid "Parameter validation"
msgstr ""
msgid "Value is out of range."
msgstr ""
#, possible-c-format, possible-boost-format
msgid ""
"Is it %s%% or %s %s?\n"
"YES for %s%%, \n"
"NO for %s %s."
msgstr ""
#, possible-boost-format
msgid "Invalid format. Expected vector format: \"%1%\""
msgstr ""
msgid "Layer Height"
msgstr ""
msgid "Line Width"
msgstr ""
msgid "Fan Speed"
msgstr ""
msgid "Temperature"
msgstr ""
msgid "Flow"
msgstr ""
msgid "Tool"
msgstr ""
msgid "Speed: "
msgstr ""
msgid "Flow: "
msgstr ""
msgid "Loading G-codes"
msgstr ""
msgid "Generating geometry vertex data"
msgstr ""
msgid "Generating geometry index data"
msgstr ""
msgid "up to"
msgstr ""
msgid "above"
msgstr ""
msgid "from"
msgstr ""
msgid "to"
msgstr ""
msgid "Color Scheme"
msgstr ""
msgid "Percent"
msgstr ""
msgid "Time"
msgstr ""
msgid "Display"
msgstr ""
msgid "Layer Height (mm)"
msgstr ""
msgid "Line Width (mm)"
msgstr ""
msgid "Speed (mm/s)"
msgstr ""
msgid "Fan Speed (%)"
msgstr ""
msgid "Temperature (°C)"
msgstr ""
msgid "Volumetric flow rate (mm³/s)"
msgstr ""
msgid "Used filament"
msgstr ""
msgid "Filament N XX"
msgstr ""
msgid "Color Print"
msgstr ""
msgid "Comsumption"
msgstr ""
msgid "Travel"
msgstr ""
msgid "Seams"
msgstr ""
msgid "Retract"
msgstr ""
msgid "Unretract"
msgstr ""
msgid "Filament Changes"
msgstr ""
msgid "Wipe"
msgstr ""
msgid "Options"
msgstr ""
msgid "travel"
msgstr ""
msgid "Extruder"
msgstr ""
msgid "Filament 1"
msgstr ""
msgid "Flushed filament"
msgstr ""
msgid "Total"
msgstr ""
msgid "Filament change times"
msgstr ""
msgid "Color change"
msgstr ""
msgid "Print"
msgstr ""
msgid "Pause"
msgstr ""
msgid "Printer"
msgstr ""
msgid "Print settings"
msgstr ""
msgid "Total Estimation"
msgstr ""
msgid "Normal mode"
msgstr ""
msgid "Cost"
msgstr ""
msgid "Prepare time"
msgstr ""
msgid "Model printing time"
msgstr ""
msgid "Switch to silent mode"
msgstr ""
msgid "Switch to normal mode"
msgstr ""
msgid "Sequence"
msgstr ""
msgid "Mirror Object"
msgstr ""
msgid "Tool Move"
msgstr ""
msgid "Move Object"
msgstr ""
msgid "Auto Orientation options"
msgstr ""
msgid "Enable rotation"
msgstr ""
msgid "Optimize support interface area"
msgstr ""
msgid "Orient"
msgstr ""
msgid "Arrange options"
msgstr ""
msgid "Spacing"
msgstr ""
msgid "Auto rotate for arrangement"
msgstr ""
msgid "Allow multiple materials on same plate"
msgstr ""
msgid "Avoid extrusion calibration region"
msgstr ""
msgid "Add plate"
msgstr ""
msgid "Auto orient"
msgstr ""
msgid "Arrange all objects"
msgstr ""
msgid "Arrange objects on selected plates"
msgstr ""
msgid "Split to objects"
msgstr ""
msgid "Split to parts"
msgstr ""
msgid "Assembly View"
msgstr ""
msgid "Select Plate"
msgstr ""
msgid "Assembly Return"
msgstr ""
msgid "return"
msgstr ""
msgid "Paint Toolbar"
msgstr ""
msgid "Explosion Ratio"
msgstr ""
msgid "Section View"
msgstr ""
msgid "Assemble Control"
msgstr ""
msgid "Total Volume:"
msgstr ""
msgid "Assembly Info"
msgstr ""
msgid "Volume:"
msgstr ""
msgid "Size:"
msgstr ""
msgid "An object is layed over the boundary of plate."
msgstr ""
msgid "A G-code path goes beyond the boundary of plate."
msgstr ""
msgid "Only the object being edit is visible."
msgstr ""
msgid ""
"An object is laid over the boundary of plate or exceeds the height limit.\n"
"Please solve the problem by moving it totally on or off the plate, and "
"confirming that the height is within the build volume."
msgstr ""
msgid "Calibration"
msgstr ""
msgid "Calibration program"
msgstr ""
msgid ""
"The calibration program detects the status of your device automatically to "
"minimize deviation.\n"
"It keeps the device performing optimally."
msgstr ""
msgid "Calibration Flow"
msgstr ""
msgid "Start Calibration"
msgstr ""
msgid "Completed"
msgstr ""
msgid "Calibrating"
msgstr ""
msgid "Timelapse"
msgstr ""
msgid "Monitoring Recording"
msgstr ""
msgid "ConnectPrinter(LAN)"
msgstr ""
msgid "Please input the printer access code:"
msgstr ""
msgid ""
"You can find it in \"Settings > Network > Connection code\"\n"
"on the printer, as shown in the figure:"
msgstr ""
msgid "Invalid input."
msgstr ""
msgid "New Window"
msgstr ""
msgid "Open a new window"
msgstr ""
msgid "Application is closing"
msgstr ""
msgid "Closing Application while some presets are modified."
msgstr ""
msgid "Logging"
msgstr ""
msgid "Prepare"
msgstr ""
msgid "Preview"
msgstr ""
msgid "Device"
msgstr ""
msgid "Project"
msgstr ""
msgid "Slice"
msgstr ""
msgid "Send and Print"
msgstr ""
msgid "Slice all"
msgstr ""
msgid "Slice plate"
msgstr ""
msgid "Print all"
msgstr ""
msgid "Export G-code file"
msgstr ""
msgid "Send"
msgstr ""
msgid "Export sliced file"
msgstr ""
msgid "Export Sliced File"
msgstr ""
msgid "Keyboard Shortcuts"
msgstr ""
msgid "Show the list of the keyboard shortcuts"
msgstr ""
msgid "Setup Wizard"
msgstr ""
msgid "Show Configuration Folder"
msgstr ""
msgid "Check for Update"
msgstr ""
#, possible-c-format, possible-boost-format
msgid "&About %s"
msgstr ""
msgid "Show Tip of the Day"
msgstr ""
msgid "Open Network Test"
msgstr ""
msgid "Default View"
msgstr ""
#. TRN To be shown in the main menu View->Top
msgid "Top"
msgstr ""
msgid "Top View"
msgstr ""
#. TRN To be shown in the main menu View->Bottom
msgid "Bottom"
msgstr ""
msgid "Bottom View"
msgstr ""
msgid "Front"
msgstr ""
msgid "Front View"
msgstr ""
msgid "Rear"
msgstr ""
msgid "Rear View"
msgstr ""
msgid "Left"
msgstr ""
msgid "Left View"
msgstr ""
msgid "Right"
msgstr ""
msgid "Right View"
msgstr ""
msgid "Start a new window"
msgstr ""
msgid "New Project"
msgstr ""
msgid "Start a new project"
msgstr ""
msgid "Open a project file"
msgstr ""
msgid "Recent projects"
msgstr ""
msgid "Save Project"
msgstr ""
msgid "Save current project to file"
msgstr ""
msgid "Save Project as"
msgstr ""
msgid "Save current project as"
msgstr ""
msgid "Import 3MF/STL/STEP/OBJ/AMF"
msgstr ""
msgid "Load a model"
msgstr ""
msgid "Import Configs"
msgstr ""
msgid "Load configs"
msgstr ""
msgid "Import"
msgstr ""
msgid "Export all objects as STL"
msgstr ""
msgid "Export Generic 3MF"
msgstr ""
msgid "Export 3mf file without using some 3mf-extensions"
msgstr ""
msgid "Export current Sliced file"
msgstr ""
msgid "Export G-code"
msgstr ""
msgid "Export current plate as G-code"
msgstr ""
msgid "Export &Configs"
msgstr ""
msgid "Export current configuration to files"
msgstr ""
msgid "Export"
msgstr ""
msgid "Quit"
msgstr ""
msgid "Undo"
msgstr ""
msgid "Redo"
msgstr ""
msgid "Cut selection to clipboard"
msgstr ""
msgid "Copy"
msgstr ""
msgid "Copy selection to clipboard"
msgstr ""
msgid "Paste"
msgstr ""
msgid "Paste clipboard"
msgstr ""
msgid "Delete selected"
msgstr ""
msgid "Deletes the current selection"
msgstr ""
msgid "Delete all"
msgstr ""
msgid "Deletes all objects"
msgstr ""
msgid "Clone selected"
msgstr ""
msgid "Clone copies of selections"
msgstr ""
msgid "Select all"
msgstr ""
msgid "Selects all objects"
msgstr ""
msgid "Deselect all"
msgstr ""
msgid "Deselects all objects"
msgstr ""
msgid "Use Perspective View"
msgstr ""
msgid "Use Orthogonal View"
msgstr ""
msgid "Show &Labels"
msgstr ""
msgid "Show object labels in 3D scene"
msgstr ""
msgid "Preferences"
msgstr ""
msgid "View"
msgstr ""
msgid "Help"
msgstr ""
msgid "&Open G-code"
msgstr ""
msgid "Open a G-code file"
msgstr ""
msgid "Re&load from Disk"
msgstr ""
msgid "Reload the plater from disk"
msgstr ""
msgid "Export &Toolpaths as OBJ"
msgstr ""
msgid "Export toolpaths as OBJ"
msgstr ""
msgid "Open &PrusaSlicer"
msgstr ""
msgid "Open PrusaSlicer"
msgstr ""
msgid "&Quit"
msgstr ""
#, possible-c-format, possible-boost-format
msgid "Quit %s"
msgstr ""
msgid "&File"
msgstr ""
msgid "&View"
msgstr ""
msgid "&Help"
msgstr ""
msgid "Overwrite file"
msgstr ""
msgid "Yes to All"
msgstr ""
msgid "No to All"
msgstr ""
msgid "Choose a directory"
msgstr ""
#, possible-c-format, possible-boost-format
msgid "There is %d config exported. (Only non-system configs)"
msgid_plural "There are %d configs exported. (Only non-system configs)"
msgstr[0] ""
msgstr[1] ""
msgid "Export result"
msgstr ""
msgid "Select profile to load:"
msgstr ""
#, possible-c-format, possible-boost-format
msgid "There is %d config imported. (Only non-system and compatible configs)"
msgid_plural ""
"There are %d configs imported. (Only non-system and compatible configs)"
msgstr[0] ""
msgstr[1] ""
msgid "Import result"
msgstr ""
msgid "File is missing"
msgstr ""
msgid "The project is no longer available."
msgstr ""
msgid "Filament Settings"
msgstr ""
msgid ""
"Do you want to synchronize your personal data from Bambu Cloud? \n"
"It contains the following information:\n"
"1. The Process presets\n"
"2. The Filament presets\n"
"3. The Printer presets\n"
msgstr ""
msgid "Synchronization"
msgstr ""
msgid "Initialize failed (No Device)!"
msgstr ""
msgid "Initialize failed (No Camera Device)!"
msgstr ""
msgid "Initializing..."
msgstr ""
msgid "Loading..."
msgstr ""
msgid "Initialize failed (Not supported with LAN-only mode)!"
msgstr ""
msgid "Initialize failed (Not accessible in LAN-only mode)!"
msgstr ""
msgid "Initialize failed (Not supported without remote video tunnel)!"
msgstr ""
#, possible-c-format, possible-boost-format
msgid "Initialize failed (%s)!"
msgstr ""
msgid "Network unreachable"
msgstr ""
msgid "Stopped."
msgstr ""
msgid "Playing..."
msgstr ""
#, possible-c-format, possible-boost-format
msgid "Load failed [%d]!"
msgstr ""
msgid "Year"
msgstr ""
msgid "Month"
msgstr ""
msgid "All Files"
msgstr ""
msgid "Group files by year, recent first."
msgstr ""
msgid "Group files by month, recent first."
msgstr ""
msgid "Show all files, recent first."
msgstr ""
msgid "Switch to timelapse files."
msgstr ""
msgid "Video"
msgstr ""
msgid "Switch to video files."
msgstr ""
msgid "Delete selected files from printer."
msgstr ""
msgid "Download"
msgstr ""
msgid "Download selected files from printer."
msgstr ""
msgid "Select"
msgstr ""
msgid "Batch manage files."
msgstr ""
msgid "No printers."
msgstr ""
msgid "Not supported."
msgstr ""
msgid "Connecting..."
msgstr ""
#, possible-c-format, possible-boost-format
msgid "Connect failed [%d]!"
msgstr ""
msgid "Loading file list..."
msgstr ""
msgid "No files"
msgstr ""
msgid "Download waiting..."
msgstr ""
msgid "Retry"
msgstr ""
msgid "Open Folder"
msgstr ""
msgid "Download finished"
msgstr ""
#, possible-c-format, possible-boost-format
msgid "Downloading %d%%..."
msgstr ""
msgid "Speed:"
msgstr ""
msgid "Deadzone:"
msgstr ""
msgid "Options:"
msgstr ""
msgid "Zoom"
msgstr ""
msgid "Translation/Zoom"
msgstr ""
msgid "3Dconnexion settings"
msgstr ""
msgid "Swap Y/Z axes"
msgstr ""
msgid "Camera"
msgstr ""
msgid "Printing Progress"
msgstr ""
msgid "Resume"
msgstr ""
msgid "Stop"
msgstr ""
msgid "0"
msgstr ""
msgid "Clean"
msgstr ""
msgid "Control"
msgstr ""
msgid "Print Options"
msgstr ""
msgid "100%"
msgstr ""
msgid "Lamp"
msgstr ""
msgid "Part Cooling"
msgstr ""
msgid "Aux Cooling"
msgstr ""
msgid "Bed"
msgstr ""
msgid "Unload"
msgstr ""
msgid "Debug Info"
msgstr ""
msgid "Printing List"
msgstr ""
msgid "Cancel print"
msgstr ""
msgid "Are you sure you want to cancel this print?"
msgstr ""
msgid "Downloading..."
msgstr ""
msgid "This only takes effect during printing"
msgstr ""
msgid "Silent"
msgstr ""
msgid "Standard"
msgstr ""
msgid "Sport"
msgstr ""
msgid "Ludicrous"
msgstr ""
msgid "Status"
msgstr ""
msgid "Media"
msgstr ""
msgid "Update"
msgstr ""
msgid "HMS"
msgstr ""
msgid "Failed to connect to the server"
msgstr ""
msgid "Failed to connect to the printer"
msgstr ""
msgid "OK"
msgstr ""
msgid "Yes"
msgstr ""
msgid "No"
msgstr ""
#, possible-c-format, possible-boost-format
msgid "%s error"
msgstr ""
#, possible-c-format, possible-boost-format
msgid "%s has encountered an error"
msgstr ""
#, possible-c-format, possible-boost-format
msgid "%s warning"
msgstr ""
#, possible-c-format, possible-boost-format
msgid "%s has a warning"
msgstr ""
#, possible-c-format, possible-boost-format
msgid "%s info"
msgstr ""
#, possible-c-format, possible-boost-format
msgid "%s information"
msgstr ""
msgid "Skip"
msgstr ""
msgid "3D Mouse disconnected."
msgstr ""
msgid "Configuration can update now."
msgstr ""
msgid "Detail."
msgstr ""
msgid "Integration was successful."
msgstr ""
msgid "Integration failed."
msgstr ""
msgid "Undo integration was successful."
msgstr ""
msgid "Undo integration failed."
msgstr ""
msgid "Exporting."
msgstr ""
msgid "Software has New version."
msgstr ""
msgid "Goto download page."
msgstr ""
msgid "More"
msgstr ""
msgid "Open Folder."
msgstr ""
#, possible-c-format, possible-boost-format
msgid "%1$d Object has custom supports."
msgid_plural "%1$d Objects have custom supports."
msgstr[0] ""
msgstr[1] ""
#, possible-c-format, possible-boost-format
msgid "%1$d Object has color painting."
msgid_plural "%1$d Objects have color painting."
msgstr[0] ""
msgstr[1] ""
msgid "ERROR"
msgstr ""
msgid "CANCELED"
msgstr ""
msgid "COMPLETED"
msgstr ""
msgid "Cancel upload"
msgstr ""
msgid "Slice ok."
msgstr ""
msgid "Export G-Code."
msgstr ""
msgid "Export."
msgstr ""
msgid "Jump to"
msgstr ""
msgid "Error:"
msgstr ""
msgid "Warning:"
msgstr ""
msgid "Export ok."
msgstr ""
msgid " (Repair)"
msgstr ""
msgid " Click here to install it."
msgstr ""
msgid "WARNING:"
msgstr ""
msgid "Your model needs support ! Please make support material enable."
msgstr ""
msgid "Gcode path overlap"
msgstr ""
msgid "Support painting"
msgstr ""
msgid "Color painting"
msgstr ""
msgid "Layers"
msgstr ""
msgid "Range"
msgstr ""
msgid "default"
msgstr ""
msgid ""
"The application cannot run normally because OpenGL version is lower than "
"2.0.\n"
msgstr ""
msgid "Please upgrade your graphics card driver."
msgstr ""
msgid "Unsupported OpenGL version"
msgstr ""
#, possible-c-format, possible-boost-format
msgid ""
"Unable to load shaders:\n"
"%s"
msgstr ""
msgid "Error loading shaders"
msgstr ""
msgctxt "Layers"
msgid "Top"
msgstr ""
msgctxt "Layers"
msgid "Bottom"
msgstr ""
msgid "Spaghetti and Excess Chute Pileup Detection"
msgstr ""
msgid "Stop printing when Spaghetti or Excess Chute Pileup is detected"
msgstr ""
msgid "First Layer Inspection"
msgstr ""
msgid "Switch to per-object setting mode to edit modifier settings."
msgstr ""
msgid "Don't show again"
msgstr ""
msgid "Global"
msgstr ""
msgid "Objects"
msgstr ""
msgid "Advance"
msgstr ""
msgid "Compare presets"
msgstr ""
msgid "View all object's settings"
msgstr ""
msgid "Filament settings"
msgstr ""
msgid "Printer settings"
msgstr ""
#, possible-boost-format
msgid " plate %1%:"
msgstr ""
msgid "Invalid name, the following characters are not allowed:"
msgstr ""
msgid "Sliced Info"
msgstr ""
msgid "Used Filament (m)"
msgstr ""
msgid "Used Filament (mm³)"
msgstr ""
msgid "Used Filament (g)"
msgstr ""
msgid "Used Materials"
msgstr ""
msgid "Estimated time"
msgstr ""
msgid "Filament changes"
msgstr ""
msgid "Click to edit preset"
msgstr ""
msgid "Connection"
msgstr ""
msgid "Bed type"
msgstr ""
msgid "Flushing volumes"
msgstr ""
msgid "Add one filament"
msgstr ""
msgid "Remove last filament"
msgstr ""
msgid "Sync material list from AMS"
msgstr ""
msgid "Set filaments to use"
msgstr ""
msgid ""
"No AMS filaments. Please select a printer in 'Device' page to load AMS info."
msgstr ""
msgid "Sync filaments with AMS"
msgstr ""
msgid ""
"Sync filaments with AMS will drop all current selected filament presets and "
"colors. Do you want to continue?"
msgstr ""
msgid "There are no compatible filaments, and sync is not performed."
msgstr ""
msgid "Untitled"
msgstr ""
#, possible-boost-format
msgid "Do you want to save changes to \"%1%\"?"
msgstr ""
#, possible-c-format, possible-boost-format
msgid ""
"Successfully unmounted. The device %s(%s) can now be safely removed from the "
"computer."
msgstr ""
#, possible-c-format, possible-boost-format
msgid "Ejecting of device %s(%s) has failed."
msgstr ""
msgid "Previous unsaved project detected, do you want to restore it?"
msgstr ""
msgid "Restore"
msgstr ""
#, possible-c-format, possible-boost-format
msgid "Loading file: %s"
msgstr ""
msgid "The 3mf is not from Bambu Lab, load geometry data only."
msgstr ""
msgid "Load 3mf"
msgstr ""
msgid "The Config can not be loaded."
msgstr ""
msgid "The 3mf is generated by old Bambu Studio, load geometry data only."
msgstr ""
#, possible-c-format, possible-boost-format
msgid ""
"The 3mf's version %s is newer than %s's version %s, Found following keys "
"unrecognized:\n"
msgstr ""
msgid "You'd better upgrade your software.\n"
msgstr ""
msgid "Newer 3mf version"
msgstr ""
#, possible-c-format, possible-boost-format
msgid ""
"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
"software.\n"
msgstr ""
msgid "The 3mf is not compatible, load geometry data only!"
msgstr ""
msgid "Incompatible 3mf"
msgstr ""
msgid "Name of components inside step file is not UTF8 format!"
msgstr ""
msgid "The name may show garbage characters!"
msgstr ""
msgid "Attention!"
msgstr ""
#, possible-boost-format
msgid "Failed loading file \"%1%\". An invalid configuration was found."
msgstr ""
msgid "Objects with zero volume removed"
msgstr ""
msgid "The volume of the object is zero"
msgstr ""
#, possible-c-format, possible-boost-format
msgid ""
"The object from file %s is too small, and maybe in meters or inches.\n"
" Do you want to scale to millimeters?"
msgstr ""
msgid "Object too small"
msgstr ""
msgid ""
"This file contains several objects positioned at multiple heights.\n"
"Instead of considering them as multiple objects, should \n"
"the file be loaded as a single object having multiple parts?"
msgstr ""
msgid "Multi-part object detected"
msgstr ""
msgid "Load these files as a single object with multiple parts?\n"
msgstr ""
msgid "Object with multiple parts was detected"
msgstr ""
msgid "The file does not contain any geometry data."
msgstr ""
msgid ""
"Your object appears to be too large, Do you want to scale it down to fit the "
"heat bed automatically?"
msgstr ""
msgid "Object too large"
msgstr ""
msgid "Export STL file:"
msgstr ""
msgid "Save file as:"
msgstr ""
msgid "The selected object couldn't be split."
msgstr ""
msgid "Another export job is running."
msgstr ""
msgid "Another export job is currently running."
msgstr ""
msgid "Select a new file"
msgstr ""
msgid "File for the replace wasn't selected"
msgstr ""
msgid "Error during replace"
msgstr ""
msgid "Please select a file"
msgstr ""
msgid "Slicing"
msgstr ""
msgid "There are warnings after slicing models:"
msgstr ""
msgid "warnings"
msgstr ""
msgid "Invalid data"
msgstr ""
#, possible-c-format, possible-boost-format
msgid "Slicing Plate %d"
msgstr ""
msgid "Please resolve the slicing errors and publish again."
msgstr ""
msgid ""
"Network Plug-in is not detected. Network related features are unavailable."
msgstr ""
msgid ""
"Preview only mode:\n"
"The loaded file contains gcode only, Can not enter the Prepare page"
msgstr ""
msgid "You can keep the modified presets to the new project or discard them"
msgstr ""
msgid "Creating a new project"
msgstr ""
msgid "Load project"
msgstr ""
msgid "The selected file"
msgstr ""
msgid "does not contain valid gcode."
msgstr ""
msgid "Error occurs while loading G-code file"
msgstr ""
msgid "Drop project file"
msgstr ""
msgid "Please select an action"
msgstr ""
msgid "Open as project"
msgstr ""
msgid "Import geometry only"
msgstr ""
msgid "Only one G-code file can be opened at the same time."
msgstr ""
msgid "G-code loading"
msgstr ""
msgid "G-code files can not be loaded with models together!"
msgstr ""
msgid "Can not add models when in preview mode!"
msgstr ""
msgid "Add Models"
msgstr ""
msgid "All objects will be removed, continue?"
msgstr ""
msgid "The current project has unsaved changes, save it before continue?"
msgstr ""
msgid "Save"
msgstr ""
msgid "Number of copies:"
msgstr ""
msgid "Copies of the selected object"
msgstr ""
msgid "Save G-code file as:"
msgstr ""
msgid "Save Sliced file as:"
msgstr ""
msgid ""
"Print By Object: \n"
"Suggest to use auto-arrange to avoid collisions when printing."
msgstr ""
msgid "Send G-code"
msgstr ""
msgid "Send to printer"
msgstr ""
msgid "Custom supports and color painting were removed before repairing."
msgstr ""
msgid "Invalid number"
msgstr ""
#, possible-boost-format
msgid "Part name: %1%\n"
msgstr ""
#, possible-boost-format
msgid "Object name: %1%\n"
msgstr ""
#, possible-boost-format
msgid "Size: %1% x %2% x %3% in\n"
msgstr ""
#, possible-boost-format
msgid "Size: %1% x %2% x %3% mm\n"
msgstr ""
#, possible-boost-format
msgid "Volume: %1% in³\n"
msgstr ""
#, possible-boost-format
msgid "Volume: %1% mm³\n"
msgstr ""
#, possible-boost-format
msgid "Triangles: %1%\n"
msgstr ""
msgid "Switching the language requires application restart.\n"
msgstr ""
msgid "Do you want to continue?"
msgstr ""
msgid "Language selection"
msgstr ""
msgid "Switching application language while some presets are modified."
msgstr ""
msgid "Changing application language"
msgstr ""
msgid "Changing the region will log out your account.\n"
msgstr ""
msgid "Region selection"
msgstr ""
msgid "Second"
msgstr ""
msgid "Browse"
msgstr ""
msgid "Choose Download Directory"
msgstr ""
msgid "General Settings"
msgstr ""
msgid "Asia-Pacific"
msgstr ""
msgid "China"
msgstr ""
msgid "Europe"
msgstr ""
msgid "North America"
msgstr ""
msgid "Others"
msgstr ""
msgid "Login Region"
msgstr ""
msgid "Metric"
msgstr ""
msgid "Imperial"
msgstr ""
msgid "Units"
msgstr ""
msgid "Show \"Tip of the day\" notification after start"
msgstr ""
msgid "If enabled, useful hints are displayed at startup."
msgstr ""
msgid "User sync"
msgstr ""
msgid "Auto sync user presets(Printer/Filament/Process)"
msgstr ""
msgid "User Sync"
msgstr ""
msgid "Associate files to BambuStudio"
msgstr ""
msgid "Associate .3mf files to BambuStudio"
msgstr ""
msgid "If enabled, sets BambuStudio as default application to open .3mf files"
msgstr ""
msgid "Associate .stl files to BambuStudio"
msgstr ""
msgid "If enabled, sets BambuStudio as default application to open .stl files"
msgstr ""
msgid "Associate .step/.stp files to BambuStudio"
msgstr ""
msgid "If enabled, sets BambuStudio as default application to open .step files"
msgstr ""
msgid "Backup"
msgstr ""
msgid "Auto-Backup"
msgstr ""
msgid "Backup interval"
msgstr ""
msgid "Downloads"
msgstr ""
msgid "Home page and daily tips"
msgstr ""
msgid "Show home page on startup"
msgstr ""
msgid "Sync settings"
msgstr ""
msgid "Preset sync"
msgstr ""
msgid "Preferences sync"
msgstr ""
msgid "View control settings"
msgstr ""
msgid "Rotate of view"
msgstr ""
msgid "Move of view"
msgstr ""
msgid "Zoom of view"
msgstr ""
msgid "Other"
msgstr ""
msgid "Mouse wheel reverses when zooming"
msgstr ""
msgid "Develop mode"
msgstr ""
msgid "Dump video"
msgstr ""
msgid "Log Level"
msgstr ""
msgid "fatal"
msgstr ""
msgid "error"
msgstr ""
msgid "warning"
msgstr ""
msgid "info"
msgstr ""
msgid "debug"
msgstr ""
msgid "trace"
msgstr ""
msgid "Host Setting"
msgstr ""
msgid "DEV host: api-dev.bambu-lab.com/v1"
msgstr ""
msgid "QA host: api-qa.bambu-lab.com/v1"
msgstr ""
msgid "PRE host: api-pre.bambu-lab.com/v1"
msgstr ""
msgid "Product host"
msgstr ""
msgid "debug save button"
msgstr ""
msgid "save debug settings"
msgstr ""
msgid "DEBUG settings have saved successfully!"
msgstr ""
msgid "Switch cloud environment, Please login again!"
msgstr ""
msgid "System presets"
msgstr ""
msgid "User presets"
msgstr ""
msgid "Incompatible presets"
msgstr ""
msgid "AMS filaments"
msgstr ""
msgid "Click to pick filament color"
msgstr ""
msgid "Add/Remove presets"
msgstr ""
msgid "Edit preset"
msgstr ""
msgid "Project-inside presets"
msgstr ""
msgid "Slice all plate to obtain time and filament estimation"
msgstr ""
msgid "Packing project data into 3mf file"
msgstr ""
msgid "Uploading 3mf"
msgstr ""
msgid "Jump to model publish web page"
msgstr ""
msgid "Note: The preparation may takes several minutes. Please be patiant."
msgstr ""
msgid "Publish"
msgstr ""
msgid "Publish was cancelled"
msgstr ""
msgid "Slicing Plate 1"
msgstr ""
msgid "Packing data to 3mf"
msgstr ""
msgid "Jump to webpage"
msgstr ""
#, possible-c-format, possible-boost-format
msgid "Save %s as"
msgstr ""
msgid "User Preset"
msgstr ""
msgid "Project Inside Preset"
msgstr ""
msgid "Name is invalid;"
msgstr ""
msgid "illegal characters:"
msgstr ""
msgid "illegal suffix:"
msgstr ""
msgid "Name is unavailable."
msgstr ""
msgid "Overwrite a system profile is not allowed"
msgstr ""
#, possible-boost-format
msgid "Preset \"%1%\" already exists."
msgstr ""
#, possible-boost-format
msgid "Preset \"%1%\" already exists and is incompatible with current printer."
msgstr ""
msgid "Please note that saving action will replace this preset"
msgstr ""
msgid "The name is not allowed to be empty."
msgstr ""
msgid "The name is not allowed to start with space character."
msgstr ""
msgid "The name is not allowed to end with space character."
msgstr ""
msgid "The name cannot be the same as a preset alias name."
msgstr ""
msgid "Save preset"
msgstr ""
msgctxt "PresetName"
msgid "Copy"
msgstr ""
#, possible-boost-format
msgid "Printer \"%1%\" is selected with preset \"%2%\""
msgstr ""
#, possible-boost-format
msgid "Please choose an action with \"%1%\" preset after saving."
msgstr ""
#, possible-boost-format
msgid "For \"%1%\", change \"%2%\" to \"%3%\" "
msgstr ""
#, possible-boost-format
msgid "For \"%1%\", add \"%2%\" as a new preset"
msgstr ""
#, possible-boost-format
msgid "Simply switch to \"%1%\""
msgstr ""
msgid "Online"
msgstr ""
msgid "Offline"
msgstr ""
msgid "My Device"
msgstr ""
msgid "Other Device"
msgstr ""
msgid "Input access code"
msgstr ""
msgid "Log out successful."
msgstr ""
msgid "Busy"
msgstr ""
msgid "Bambu Cool Plate"
msgstr ""
msgid "Bamabu Engineering Plate"
msgstr ""
msgid "Bamabu High Temperature Plate"
msgstr ""
msgid "Refresh"
msgstr ""
msgid "Bed Leveling"
msgstr ""
msgid "Flow Calibration"
msgstr ""
msgid "send completed"
msgstr ""
msgid "No login account, only printers in LAN mode are displayed"
msgstr ""
msgid "Connecting to server"
msgstr ""
msgid "Synchronizing device information"
msgstr ""
msgid "Synchronizing device information time out"
msgstr ""
msgid "Cannot send the print task when the upgrade is in progress"
msgstr ""
msgid ""
"The printer is executing instructions. Please restart printing after it ends"
msgstr ""
msgid "The printer is busy on other print job"
msgstr ""
#, possible-c-format, possible-boost-format
msgid ""
"Filament %s exceeds the number of AMS slots. Please update the printer "
"firmware to support AMS slot assignment."
msgstr ""
msgid ""
"Filament exceeds the number of AMS slots. Please update the printer firmware "
"to support AMS slot assignment."
msgstr ""
msgid ""
"Filaments to AMS slots mappings have been established. You can click a "
"filament above to change its mapping AMS slot"
msgstr ""
msgid ""
"Please click each filament above to specify its mapping AMS slot before "
"sending the print job"
msgstr ""
#, possible-c-format, possible-boost-format
msgid ""
"Filament %s does not match the filament in AMS slot %s. Please update the "
"printer firmware to support AMS slot assignment."
msgstr ""
msgid ""
"Filament does not match the filament in AMS slot. Please update the printer "
"firmware to support AMS slot assignment."
msgstr ""
msgid ""
"The printer firmware only supports sequential mapping of filament => AMS "
"slot."
msgstr ""
msgid "An SD card needs to be inserted before printing."
msgstr ""
msgid "Preparing print job"
msgstr ""
msgid "Modifying the device name"
msgstr ""
msgid "Log in printer"
msgstr ""
msgid "Would you like to log in this printer with current account?"
msgstr ""
msgid "Log in successful."
msgstr ""
msgid "Log out printer"
msgstr ""
msgid "Would you like to log out the printer?"
msgstr ""
msgid "Please log in first."
msgstr ""
msgid "There was a problem connecting to the printer. Please try again."
msgstr ""
msgid "Failed to log out."
msgstr ""
#. TRN "Save current Settings"
#, possible-c-format, possible-boost-format
msgid "Save current %s"
msgstr ""
msgid "Delete this preset"
msgstr ""
msgid "Search in preset"
msgstr ""
msgid "Click to reset all settings to the last saved preset."
msgstr ""
msgid ""
"Prime tower is required by smooth timeplase. If whthout prime tower, there "
"will be flaws on the model. Are you sure you want to disable prime tower?"
msgstr ""
msgid ""
"Prime tower is required by smooth timelapse. If whthout prime tower, there "
"will be flaws on the model. Do you want to enable prime tower?"
msgstr ""
msgid ""
"When recording timelapse without toolhead, it is recommended to add a "
"\"Timelapse Wipe Tower\" \n"
"by right-click the empty position of build plate and choose \"Add Primitive"
"\"->\"Timelapse Wipe Tower\".\n"
msgstr ""
msgid "Line width"
msgstr ""
msgid "Seam"
msgstr ""
msgid "Precision"
msgstr ""
msgid "Walls"
msgstr ""
msgid "Top/bottom shells"
msgstr ""
msgid "Initial layer speed"
msgstr ""
msgid "Other layers speed"
msgstr ""
msgid "Overhang speed"
msgstr ""
msgid ""
"This is the speed for various overhang degrees. Overhang degrees are "
"expressed as a percentage of line width. 0 speed means no slowing down for "
"the overhang degree range and wall speed is used"
msgstr ""
msgid "Travel speed"
msgstr ""
msgid "Acceleration"
msgstr ""
msgid "Support filament"
msgstr ""
msgid "Prime tower"
msgstr ""
msgid "Flush options"
msgstr ""
msgid "Special mode"
msgstr ""
msgid "G-code output"
msgstr ""
msgid "Frequent"
msgstr ""
#, possible-c-format, possible-boost-format
msgid ""
"Following line %s contains reserved keywords.\n"
"Please remove it, or will beat G-code visualization and printing time "
"estimation."
msgid_plural ""
"Following lines %s contain reserved keywords.\n"
"Please remove them, or will beat G-code visualization and printing time "
"estimation."
msgstr[0] ""
msgstr[1] ""
msgid "Reserved keywords found"
msgstr ""
msgid "Setting Overrides"
msgstr ""
msgid "Retraction"
msgstr ""
msgid "Basic information"
msgstr ""
msgid "Recommended nozzle temperature"
msgstr ""
msgid "Recommended nozzle temperature range of this filament. 0 means no set"
msgstr ""
msgid "Recommended temperature range"
msgstr ""
msgid "Print temperature"
msgstr ""
msgid "Nozzle"
msgstr ""
msgid "Nozzle temperature when printing"
msgstr ""
msgid "Cool plate"
msgstr ""
msgid ""
"Bed temperature when cool plate is installed. Value 0 means the filament "
"does not support to print on the Cool Plate"
msgstr ""
msgid "Engineering plate"
msgstr ""
msgid ""
"Bed temperature when engineering plate is installed. Value 0 means the "
"filament does not support to print on the Engineering Plate"
msgstr ""
msgid "High Temp Plate"
msgstr ""
msgid ""
"Bed temperature when high temperature plate is installed. Value 0 means the "
"filament does not support to print on the High Temp Plate"
msgstr ""
msgid "Textured PEI Plate"
msgstr ""
msgid ""
"Bed temperature when Textured PEI Plate is installed. Value 0 means the "
"filament does not support to print on the Textured PEI Plate"
msgstr ""
msgid "Volumetric speed limitation"
msgstr ""
msgid "Cooling"
msgstr ""
msgid "Cooling for specific layer"
msgstr ""
msgid "Part cooling fan"
msgstr ""
msgid "Min fan speed threshold"
msgstr ""
msgid ""
"Part cooling fan speed will start to run at min speed when the estimated "
"layer time is no longer than the layer time in setting. When layer time is "
"shorter than threshold, fan speed is interpolated between the minimum and "
"maximum fan speed according to layer printing time"
msgstr ""
msgid "Max fan speed threshold"
msgstr ""
msgid ""
"Part cooling fan speed will be max when the estimated layer time is shorter "
"than the setting value"
msgstr ""
msgid "Auxiliary part cooling fan"
msgstr ""
msgid "Filament start G-code"
msgstr ""
msgid "Filament end G-code"
msgstr ""
msgid "Printable space"
msgstr ""
msgid "Extruder Clearance"
msgstr ""
msgid "Accessory"
msgstr ""
msgid "Machine gcode"
msgstr ""
msgid "Machine start G-code"
msgstr ""
msgid "Machine end G-code"
msgstr ""
msgid "Before layer change G-code"
msgstr ""
msgid "Layer change G-code"
msgstr ""
msgid "Change filament G-code"
msgstr ""
msgid "Pause G-code"
msgstr ""
msgid "Template Custom G-code"
msgstr ""
msgid "Motion ability"
msgstr ""
msgid "Normal"
msgstr ""
msgid "Speed limitation"
msgstr ""
msgid "Acceleration limitation"
msgstr ""
msgid "Jerk limitation"
msgstr ""
msgid "Layer height limits"
msgstr ""
msgid "Retraction when switching material"
msgstr ""
msgid "Detached"
msgstr ""
msgid "Following preset will be deleted too."
msgid_plural "Following presets will be deleted too."
msgstr[0] ""
msgstr[1] ""
#, possible-boost-format
msgid "Are you sure to %1% the selected preset?"
msgstr ""
#. TRN Remove/Delete
#, possible-boost-format
msgid "%1% Preset"
msgstr ""
msgid "All"
msgstr ""
msgid "Set"
msgstr ""
msgid "Custom G-code"
msgstr ""
msgid "Click to reset current value and attach to the global value."
msgstr ""
msgid "Click to drop current modify and reset to saved value."
msgstr ""
msgid "Process Settings"
msgstr ""
msgid "Undef"
msgstr ""
msgid "Unsaved Changes"
msgstr ""
msgid "Discard or Keep changes"
msgstr ""
msgid "Old Value"
msgstr ""
msgid "New Value"
msgstr ""
msgid "Transfer"
msgstr ""
msgid "Don't save"
msgstr ""
msgid "Discard"
msgstr ""
msgid "Click the right mouse button to display the full text."
msgstr ""
msgid "All changes will not be saved"
msgstr ""
msgid "All changes will be discarded."
msgstr ""
msgid "Save the selected options."
msgstr ""
msgid "Keep the selected options."
msgstr ""
msgid "Transfer the selected options to the newly selected preset."
msgstr ""
#, possible-boost-format
msgid ""
"Save the selected options to preset \n"
"\"%1%\"."
msgstr ""
#, possible-boost-format
msgid ""
"Transfer the selected options to the newly selected preset \n"
"\"%1%\"."
msgstr ""
#, possible-boost-format
msgid "Preset \"%1%\" contains the following unsaved changes:"
msgstr ""
#, possible-boost-format
msgid ""
"Preset \"%1%\" is not compatible with the new printer profile and it "
"contains the following unsaved changes:"
msgstr ""
#, possible-boost-format
msgid ""
"Preset \"%1%\" is not compatible with the new process profile and it "
"contains the following unsaved changes:"
msgstr ""
msgid ""
"You have changed some preset settings. \n"
"Would you like to keep these changed settings after switching preset?"
msgstr ""
msgid "Extruders count"
msgstr ""
msgid "General"
msgstr ""
msgid "Capabilities"
msgstr ""
msgid "Show all presets (including incompatible)"
msgstr ""
msgid "Add File"
msgstr ""
msgid "Set as cover"
msgstr ""
msgid "Cover"
msgstr ""
#, possible-boost-format
msgid "The name \"%1%\" already exists."
msgstr ""
msgid "Basic Info"
msgstr ""
msgid "Pictures"
msgstr ""
msgid "Bill of Materials"
msgstr ""
msgid "Assembly Guide"
msgstr ""
msgid "Choose files"
msgstr ""
msgid "Author"
msgstr ""
msgid "Model Name"
msgstr ""
#, possible-c-format, possible-boost-format
msgid "%s Update"
msgstr ""
msgid "A new version is available"
msgstr ""
msgid "Configuration update"
msgstr ""
msgid "A new configuration package available, Do you want to install it?"
msgstr ""
msgid "Description:"
msgstr ""
msgid "Configuration incompatible"
msgstr ""
msgid "the configuration package is incompatible with current application."
msgstr ""
#, possible-c-format, possible-boost-format
msgid ""
"The configuration package is incompatible with current application.\n"
"%s will update the configuration package, Otherwise it won't be able to start"
msgstr ""
#, possible-c-format, possible-boost-format
msgid "Exit %s"
msgstr ""
msgid "the Configuration package is incompatible with current APP."
msgstr ""
msgid "Configuration updates"
msgstr ""
msgid "No updates available."
msgstr ""
msgid "The configuration is up to date."
msgstr ""
msgid "Auto-Calc"
msgstr ""
msgid "Flushing volumes for filament change"
msgstr ""
msgid "Flushing volume (mm³) for each filament pair."
msgstr ""
msgid "Flush multiplier"
msgstr ""
msgid "unloaded"
msgstr ""
msgid "loaded"
msgstr ""
msgid "Filament #"
msgstr ""
msgid "From"
msgstr ""
msgid "To"
msgstr ""
msgid "Login"
msgstr ""
msgid "The configuration package is changed in previous Config Guide"
msgstr ""
msgid "Configuration package changed"
msgstr ""
msgid "Toolbar"
msgstr ""
msgid "Objects list"
msgstr ""
msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files."
msgstr ""
msgid "Copy to clipboard"
msgstr ""
msgid "Paste from clipboard"
msgstr ""
msgid "Show/Hide 3Dconnexion devices settings dialog"
msgstr ""
msgid "Show keyboard shortcuts list"
msgstr ""
msgid "Global shortcuts"
msgstr ""
msgid "Rotate View"
msgstr ""
msgid "Pan View"
msgstr ""
msgid "Mouse wheel"
msgstr ""
msgid "Zoom View"
msgstr ""
msgid ""
"Auto orientates selected objects or all objects.If there are selected "
"objects, it just orientates the selected ones.Otherwise, it will orientates "
"all objects in the current disk."
msgstr ""
msgid "Collapse/Expand the sidebar"
msgstr ""
msgid "⌘+Any arrow"
msgstr ""
msgid "Movement in camera space"
msgstr ""
msgid "⌥+Left mouse button"
msgstr ""
msgid "Select a part"
msgstr ""
msgid "⌘+Left mouse button"
msgstr ""
msgid "Select multiple objects"
msgstr ""
msgid "Ctrl+Any arrow"
msgstr ""
msgid "Alt+Left mouse button"
msgstr ""
msgid "Ctrl+Left mouse button"
msgstr ""
msgid "Shift+Left mouse button"
msgstr ""
msgid "Select objects by rectangle"
msgstr ""
msgid "Arrow Up"
msgstr ""
msgid "Move selection 10 mm in positive Y direction"
msgstr ""
msgid "Arrow Down"
msgstr ""
msgid "Move selection 10 mm in negative Y direction"
msgstr ""
msgid "Arrow Left"
msgstr ""
msgid "Move selection 10 mm in negative X direction"
msgstr ""
msgid "Arrow Right"
msgstr ""
msgid "Move selection 10 mm in positive X direction"
msgstr ""
msgid "Shift+Any arrow"
msgstr ""
msgid "Movement step set to 1 mm"
msgstr ""
msgid "keyboard 1-9: set filament for object/part"
msgstr ""
msgid "Camera view - Default"
msgstr ""
msgid "Camera view - Top"
msgstr ""
msgid "Camera view - Bottom"
msgstr ""
msgid "Camera view - Front"
msgstr ""
msgid "Camera view - Behind"
msgstr ""
msgid "Camera Angle - Left side"
msgstr ""
msgid "Camera Angle - Right side"
msgstr ""
msgid "Select all objects"
msgstr ""
msgid "Gizmo move"
msgstr ""
msgid "Gizmo scale"
msgstr ""
msgid "Gizmo rotate"
msgstr ""
msgid "Gizmo cut"
msgstr ""
msgid "Gizmo Place face on bed"
msgstr ""
msgid "Gizmo SLA support points"
msgstr ""
msgid "Gizmo FDM paint-on seam"
msgstr ""
msgid "Plater"
msgstr ""
msgid "Move: press to snap by 1mm"
msgstr ""
msgid "⌘+Mouse wheel"
msgstr ""
msgid "Support/Color Painting: adjust pen radius"
msgstr ""
msgid "⌥+Mouse wheel"
msgstr ""
msgid "Support/Color Painting: adjust section position"
msgstr ""
msgid "Ctrl+Mouse wheel"
msgstr ""
msgid "Alt+Mouse wheel"
msgstr ""
msgid "Gizmo"
msgstr ""
msgid "Set extruder number for the objects and parts"
msgstr ""
msgid "Delete objects, parts, modifiers "
msgstr ""
msgid "Space"
msgstr ""
msgid "Select the object/part and press space to change the name"
msgstr ""
msgid "Mouse click"
msgstr ""
msgid "Select the object/part and mouse click to change the name"
msgstr ""
msgid "Objects List"
msgstr ""
msgid "Vertical slider - Move active thumb Up"
msgstr ""
msgid "Vertical slider - Move active thumb Down"
msgstr ""
msgid "Horizontal slider - Move active thumb Left"
msgstr ""
msgid "Horizontal slider - Move active thumb Right"
msgstr ""
msgid "On/Off one layer mode of the vertical slider"
msgstr ""
msgid "Move slider 5x faster"
msgstr ""
msgid "Shift+Mouse wheel"
msgstr ""
msgid "Release Note"
msgstr ""
#, possible-c-format, possible-boost-format
msgid "version %s update information :"
msgstr ""
msgid "New version of Bambu Studio"
msgstr ""
msgid "Don't remind me of this version again"
msgstr ""
msgid "Model:"
msgstr ""
msgid "Serial:"
msgstr ""
msgid "Version:"
msgstr ""
msgid "Upgrade firmware"
msgstr ""
msgid "Printing"
msgstr ""
msgid "Idle"
msgstr ""
msgid "Latest version"
msgstr ""
msgid "Upgrading"
msgstr ""
msgid "Upgrading failed"
msgstr ""
msgid "Upgrading successful"
msgstr ""
msgid ""
"Are you sure you want to update? This will take about 10 minutes. Do not "
"turn off the power while the printer is updating."
msgstr ""
msgid ""
"An important update was detected and needs to be run before printing can "
"continue. Do you want to update now? You can also update later from 'Upgrade "
"firmware'."
msgstr ""
msgid ""
"The firmware version is abnormal. Repairing and updating are required before "
"printing. Do you want to update now? You can also update later on printer or "
"update next time starting the studio."
msgstr ""
msgid "Saving objects into the 3mf failed."
msgstr ""
msgid "Only Windows 10 is supported."
msgstr ""
msgid "Failed to initialize the WinRT library."
msgstr ""
msgid "Exporting objects"
msgstr ""
msgid "Failed loading objects."
msgstr ""
msgid "Repairing object by Windows service"
msgstr ""
msgid "Repair failed."
msgstr ""
msgid "Loading repaired objects"
msgstr ""
msgid "Exporting 3mf file failed"
msgstr ""
msgid "Import 3mf file failed"
msgstr ""
msgid "Repaired 3mf file does not contain any object"
msgstr ""
msgid "Repaired 3mf file contains more than one object"
msgstr ""
msgid "Repaired 3mf file does not contain any volume"
msgstr ""
msgid "Repaired 3mf file contains more than one volume"
msgstr ""
msgid "Repair finished"
msgstr ""
msgid "Repair canceled"
msgstr ""
#, possible-boost-format
msgid "Copying of file %1% to %2% failed: %3%"
msgstr ""
#, possible-boost-format
msgid "Copying directory %1% to %2% failed: %3%"
msgstr ""
msgid "Need to check the unsaved changes before configuration updates."
msgstr ""
msgid "Configuration package updated to "
msgstr ""
msgid "Open G-code file:"
msgstr ""
msgid ""
"One object has empty initial layer and can't be printed. Please Cut the "
"bottom or enable supports."
msgstr ""
#, possible-boost-format
msgid "Object can't be printed for empty layer between %1% and %2%."
msgstr ""
#, possible-boost-format
msgid "Object: %1%"
msgstr ""
msgid ""
"Maybe parts of the object at these height are too thin, or the object has "
"faulty mesh"
msgstr ""
msgid "No object can be printed. Maybe too small"
msgstr ""
msgid ""
"Failed to generate gcode for invalid custom G-code.\n"
"\n"
msgstr ""
msgid "Please check the custom G-code or use the default custom G-code."
msgstr ""
#, possible-boost-format
msgid "Generating G-code: layer %1%"
msgstr ""
msgid "Inner wall"
msgstr ""
msgid "Outer wall"
msgstr ""
msgid "Overhang wall"
msgstr ""
msgid "Sparse infill"
msgstr ""
msgid "Internal solid infill"
msgstr ""
msgid "Top surface"
msgstr ""
msgid "Bottom surface"
msgstr ""
msgid "Bridge"
msgstr ""
msgid "Gap infill"
msgstr ""
msgid "Support interface"
msgstr ""
msgid "Support transition"
msgstr ""
msgid "Multiple"
msgstr ""
#, possible-boost-format
msgid "Failed to calculate line width of %1%. Can not get value of \"%2%\" "
msgstr ""
msgid "undefined error"
msgstr ""
msgid "too many files"
msgstr ""
msgid "file too large"
msgstr ""
msgid "unsupported method"
msgstr ""
msgid "unsupported encryption"
msgstr ""
msgid "unsupported feature"
msgstr ""
msgid "failed finding central directory"
msgstr ""
msgid "not a ZIP archive"
msgstr ""
msgid "invalid header or corrupted"
msgstr ""
msgid "unsupported multidisk"
msgstr ""
msgid "decompression failed"
msgstr ""
msgid "compression failed"
msgstr ""
msgid "unexpected decompressed size"
msgstr ""
msgid "CRC check failed"
msgstr ""
msgid "unsupported central directory size"
msgstr ""
msgid "allocation failed"
msgstr ""
msgid "file open failed"
msgstr ""
msgid "file create failed"
msgstr ""
msgid "file write failed"
msgstr ""
msgid "file read failed"
msgstr ""
msgid "file close failed"
msgstr ""
msgid "file seek failed"
msgstr ""
msgid "file stat failed"
msgstr ""
msgid "invalid parameter"
msgstr ""
msgid "invalid filename"
msgstr ""
msgid "buffer too small"
msgstr ""
msgid "internal error"
msgstr ""
msgid "file not found"
msgstr ""
msgid "archive too large"
msgstr ""
msgid "validation failed"
msgstr ""
msgid "write callback failed"
msgstr ""
#, possible-boost-format
msgid ""
"%1% is too close to exclusion area, there may be collisions when printing."
msgstr ""
#, possible-boost-format
msgid ""
"\n"
"%1% is too close to exclusion area, there may be collisions when printing."
msgstr ""
#, possible-boost-format
msgid "%1% is too close to others, and collisions may be caused."
msgstr ""
#, possible-boost-format
msgid "%1% is too tall, and collisions will be caused."
msgstr ""
msgid " is too close to others, there may be collisions when printing.\n"
msgstr ""
msgid ""
" is too close to exclusion area, there may be collisions when printing.\n"
msgstr ""
msgid "Prime Tower"
msgstr ""
msgid " is too close to others, and collisions may be caused.\n"
msgstr ""
msgid " is too close to exclusion area, and collisions will be caused.\n"
msgstr ""
msgid ""
"Can not print multiple filaments which have large difference of temperature "
"together. Otherwise, the extruder and nozzle may be blocked or damaged "
"during printing"
msgstr ""
msgid "No extrusions under current settings."
msgstr ""
msgid ""
"Smooth mode of timelapse is not supported when \"by object\" sequence is "
"enabled."
msgstr ""
msgid ""
"Please select \"By object\" print sequence to print multiple objects in "
"spiral vase mode."
msgstr ""
msgid ""
"The spiral vase mode does not work when an object contains more than one "
"materials."
msgstr ""
msgid "The prime tower is not supported in \"By object\" print."
msgstr ""
msgid ""
"The prime tower is not supported when adaptive layer height is on. It "
"requires that all objects have the same layer height."
msgstr ""
msgid "The prime tower requires \"support gap\" to be multiple of layer height"
msgstr ""
msgid "The prime tower requires that all objects have the same layer heights"
msgstr ""
msgid ""
"The prime tower requires that all objects are printed over the same number "
"of raft layers"
msgstr ""
msgid ""
"The prime tower requires that all objects are sliced with the same layer "
"heights."
msgstr ""
msgid "Too small line width"
msgstr ""
msgid "Too large line width"
msgstr ""
msgid ""
"The prime tower requires that support has the same layer height with object."
msgstr ""
msgid ""
"Support enforcers are used but support is not enabled. Please enable support."
msgstr ""
msgid "Layer height cannot exceed nozzle diameter"
msgstr ""
#, possible-c-format, possible-boost-format
msgid "Plate %d: %s does not support filament %s.\n"
msgstr ""
msgid "Generating skirt & brim"
msgstr ""
msgid "Exporting G-code"
msgstr ""
msgid "Generating G-code"
msgstr ""
msgid "Failed processing of the filename_format template."
msgstr ""
msgid "Printable area"
msgstr ""
msgid "Bed exclude area"
msgstr ""
msgid ""
"Unprintable area in XY plane. For example, X1 Series printers use the front "
"left corner to cut filament during filament change. The area is expressed as "
"polygon by points in following format: \"XxY, XxY, ...\""
msgstr ""
msgid "Elephant foot compensation"
msgstr ""
msgid ""
"Shrink the initial layer on build plate to compensate for elephant foot "
"effect"
msgstr ""
msgid ""
"Slicing height for each layer. Smaller layer height means more accurate and "
"more printing time"
msgstr ""
msgid "Printable height"
msgstr ""
msgid "Maximum printable height which is limited by mechanism of printer"
msgstr ""
msgid "Printer preset names"
msgstr ""
msgid "Hostname, IP or URL"
msgstr ""
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance. Print host "
"behind HAProxy with basic auth enabled can be accessed by putting the user "
"name and password into the URL in the following format: https://username:"
"password@your-octopi-address/"
msgstr ""
msgid "API Key / Password"
msgstr ""
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the API Key or the password required for authentication."
msgstr ""
msgid "Name of the printer"
msgstr ""
msgid "HTTPS CA File"
msgstr ""
msgid ""
"Custom CA certificate file can be specified for HTTPS OctoPrint connections, "
"in crt/pem format. If left blank, the default OS CA certificate repository "
"is used."
msgstr ""
msgid "User"
msgstr ""
msgid "Password"
msgstr ""
msgid "Ignore HTTPS certificate revocation checks"
msgstr ""
msgid ""
"Ignore HTTPS certificate revocation checks in case of missing or offline "
"distribution points. One may want to enable this option for self signed "
"certificates if connection fails."
msgstr ""
msgid "Names of presets related to the physical printer"
msgstr ""
msgid "Authorization Type"
msgstr ""
msgid "API key"
msgstr ""
msgid "HTTP digest"
msgstr ""
msgid "Avoid crossing wall"
msgstr ""
msgid "Detour and avoid to travel across wall which may cause blob on surface"
msgstr ""
msgid "Avoid crossing wall - Max detour length"
msgstr ""
msgid ""
"Maximum detour distance for avoiding crossing wall. Don't detour if the "
"detour distance is large than this value. Detour length could be specified "
"either as an absolute value or as percentage (for example 50%) of a direct "
"travel path. Zero to disable"
msgstr ""
msgid "mm or %"
msgstr ""
msgid "Other layers"
msgstr ""
msgid ""
"Bed temperature for layers except the initial one. Value 0 means the "
"filament does not support to print on the Cool Plate"
msgstr ""
msgid "°C"
msgstr ""
msgid "Bed temperature"
msgstr ""
msgid ""
"Bed temperature for layers except the initial one. Value 0 means the "
"filament does not support to print on the Engineering Plate"
msgstr ""
msgid ""
"Bed temperature for layers except the initial one. Value 0 means the "
"filament does not support to print on the High Temp Plate"
msgstr ""
msgid ""
"Bed temperature for layers except the initial one. Value 0 means the "
"filament does not support to print on the Textured PEI Plate"
msgstr ""
msgid "Initial layer"
msgstr ""
msgid "Initial layer bed temperature"
msgstr ""
msgid ""
"Bed temperature of the initial layer. Value 0 means the filament does not "
"support to print on the Cool Plate"
msgstr ""
msgid ""
"Bed temperature of the initial layer. Value 0 means the filament does not "
"support to print on the Engineering Plate"
msgstr ""
msgid ""
"Bed temperature of the initial layer. Value 0 means the filament does not "
"support to print on the High Temp Plate"
msgstr ""
msgid ""
"Bed temperature of the initial layer. Value 0 means the filament does not "
"support to print on the Textured PEI Plate"
msgstr ""
msgid "Bed types supported by the printer"
msgstr ""
msgid "Cool Plate"
msgstr ""
msgid "Engineering Plate"
msgstr ""
msgid "This G-code is inserted at every layer change before lifting z"
msgstr ""
msgid "Bottom shell layers"
msgstr ""
msgid ""
"This is the number of solid layers of bottom shell, including the bottom "
"surface layer. When the thickness calculated by this value is thinner than "
"bottom shell thickness, the bottom shell layers will be increased"
msgstr ""
msgid "Bottom shell thickness"
msgstr ""
msgid ""
"The number of bottom solid layers is increased when slicing if the thickness "
"calculated by bottom shell layers is thinner than this value. This can avoid "
"having too thin shell when layer height is small. 0 means that this setting "
"is disabled and thickness of bottom shell is absolutely determained by "
"bottom shell layers"
msgstr ""
msgid "Force cooling for overhang and bridge"
msgstr ""
msgid ""
"Enable this option to optimize part cooling fan speed for overhang and "
"bridge to get better cooling"
msgstr ""
msgid "Fan speed for overhang"
msgstr ""
msgid ""
"Force part cooling fan to be this speed when printing bridge or overhang "
"wall which has large overhang degree. Forcing cooling for overhang and "
"bridge can get better quality for these part"
msgstr ""
msgid "Cooling overhang threshold"
msgstr ""
msgid ""
"Force cooling fan to be specific speed when overhang degree of printed part "
"exceeds this value. Expressed as percentage which indicides how much width "
"of the line without support from lower layer"
msgstr ""
msgid "Bridge flow"
msgstr ""
msgid ""
"Decrease this value slightly(for example 0.9) to reduce the amount of "
"material for bridge, to improve sag"
msgstr ""
msgid "Only one wall on top surfaces"
msgstr ""
msgid ""
"Use only one wall on flat top surface, to give more space to the top infill "
"pattern"
msgstr ""
msgid "Slow down for overhang"
msgstr ""
msgid "Enable this option to slow printing down for different overhang degree"
msgstr ""
msgid "mm/s"
msgstr ""
msgid "Speed of bridge and completely overhang wall"
msgstr ""
msgid "Brim width"
msgstr ""
msgid "Distance from model to the outermost brim line"
msgstr ""
msgid "Brim type"
msgstr ""
msgid ""
"This controls brim position including outer side of models, inner side of "
"holes or both. Auto means both the brim position and brim width is analysed "
"and calculated automatically"
msgstr ""
msgid "Brim-object gap"
msgstr ""
msgid ""
"A gap between innermost brim line and object can make brim be removed more "
"easily"
msgstr ""
msgid "Compatible machine"
msgstr ""
msgid "Compatible machine condition"
msgstr ""
msgid "Compatible process profiles"
msgstr ""
msgid "Compatible process profiles condition"
msgstr ""
msgid "Print sequence"
msgstr ""
msgid "Print sequence, layer by layer or object by object"
msgstr ""
msgid "By layer"
msgstr ""
msgid "By object"
msgstr ""
msgid "Slow printing down for better layer cooling"
msgstr ""
msgid ""
"Enable this option to slow printing speed down to make the final layer time "
"not shorter than the layer time threshold in \"Max fan speed threshold\", so "
"that layer can be cooled for longer time. This can improve the cooling "
"quality for needle and small details"
msgstr ""
msgid "Normal printing"
msgstr ""
msgid ""
"The default acceleration of both normal printing and travel except initial "
"layer"
msgstr ""
msgid "mm/s²"
msgstr ""
msgid "Default filament profile"
msgstr ""
msgid "Default filament profile when switch to this machine profile"
msgstr ""
msgid "Default process profile"
msgstr ""
msgid "Default process profile when switch to this machine profile"
msgstr ""
msgid "No cooling for the first"
msgstr ""
msgid ""
"Close all cooling fan for the first certain layers. Cooling fan of the first "
"layer used to be closed to get better build plate adhesion"
msgstr ""
msgid "layers"
msgstr ""
msgid "Don't support bridges"
msgstr ""
msgid ""
"Don't support the whole bridge area which make support very large. Bridge "
"usually can be printing directly without support if not very long"
msgstr ""
msgid "Thick bridges"
msgstr ""
msgid "Layers and Perimeters"
msgstr ""
msgid ""
"If enabled, bridges are more reliable, can bridge longer distances, but may "
"look worse. If disabled, bridges look better but are reliable just for "
"shorter bridged distances."
msgstr ""
msgid "Max bridge length"
msgstr ""
msgid ""
"Max length of bridges that don't need support. Set it to 0 if you want all "
"bridges to be supported, and set it to a very large value if you don't want "
"any bridges to be supported."
msgstr ""
msgid "End G-code"
msgstr ""
msgid "End G-code when finish the whole printing"
msgstr ""
msgid "End G-code when finish the printing of this filament"
msgstr ""
msgid "Top surface pattern"
msgstr ""
msgid "Line pattern of top surface infill"
msgstr ""
msgid "Concentric"
msgstr ""
msgid "Rectilinear"
msgstr ""
msgid "Monotonic"
msgstr ""
msgid "Monotonic line"
msgstr ""
msgid "Aligned Rectilinear"
msgstr ""
msgid "Hilbert Curve"
msgstr ""
msgid "Bottom surface pattern"
msgstr ""
msgid "Line pattern of bottom surface infill, not bridge infill"
msgstr ""
msgid "Line width of outer wall"
msgstr ""
msgid ""
"Speed of outer wall which is outermost and visible. It's used to be slower "
"than inner wall speed to get better quality."
msgstr ""
msgid "Order of inner wall/outer wall/infil"
msgstr ""
msgid "Print sequence of inner wall, outer wall and infill. "
msgstr ""
msgid "inner/outer/infill"
msgstr ""
msgid "outer/inner/infill"
msgstr ""
msgid "infill/inner/outer"
msgstr ""
msgid "infill/outer/inner"
msgstr ""
msgid "Height to rod"
msgstr ""
msgid ""
"Distance of the nozzle tip to the lower rod. Used as input of auto-arranging "
"to avoid collision when printing by object"
msgstr ""
msgid "Height to lid"
msgstr ""
msgid ""
"Distance of the nozzle tip to the lid. Used as input of auto-arranging to "
"avoid collision when printing by object"
msgstr ""
msgid "Radius"
msgstr ""
msgid ""
"Clearance radius around extruder. Used as input of auto-arranging to avoid "
"collision when printing by object"
msgstr ""
msgid "Extruder Color"
msgstr ""
msgid "Only used as a visual help on UI"
msgstr ""
msgid "Extruder offset"
msgstr ""
msgid "Flow ratio"
msgstr ""
msgid ""
"The material may have volumetric change after switching between molten state "
"and crystalline state. This setting changes all extrusion flow of this "
"filament in gcode proportionally. Recommended value range is between 0.95 "
"and 1.05. Maybe you can tune this value to get nice flat surface when there "
"has slight overflow or underflow"
msgstr ""
msgid "Default line width if some line width is set to be zero"
msgstr ""
msgid "Keep fan always on"
msgstr ""
msgid ""
"If enable this setting, part cooling fan will never be stoped and will run "
"at least at minimum speed to reduce the frequency of starting and stoping"
msgstr ""
msgid "Layer time"
msgstr ""
msgid ""
"Part cooling fan will be enabled for layers of which estimated time is "
"shorter than this value. Fan speed is interpolated between the minimum and "
"maximum fan speeds according to layer printing time"
msgstr ""
msgid "s"
msgstr ""
msgid "Color"
msgstr ""
msgid "Max volumetric speed"
msgstr ""
msgid ""
"This setting stands for how much volume of filament can be melted and "
"extruded per second. Printing speed is limited by max volumetric speed, in "
"case of too high and unreasonable speed setting. Zero means no limit"
msgstr ""
msgid "mm³/s"
msgstr ""
msgid "Minimal purge on wipe tower"
msgstr ""
msgid "mm³"
msgstr ""
msgid "Filament load time"
msgstr ""
msgid "Time to load new filament when switch filament. For statistics only"
msgstr ""
msgid "Filament unload time"
msgstr ""
msgid "Time to unload old filament when switch filament. For statistics only"
msgstr ""
msgid ""
"Filament diameter is used to calculate extrusion in gcode, so it's important "
"and should be accurate"
msgstr ""
msgid "Density"
msgstr ""
msgid "Filament density. For statistics only"
msgstr ""
msgid "g/cm³"
msgstr ""
msgid "Type"
msgstr ""
msgid "The material type of filament"
msgstr ""
msgid "Soluble material"
msgstr ""
msgid ""
"Soluble material is commonly used to print support and support interface"
msgstr ""
msgid "Support material"
msgstr ""
msgid ""
"Support material is commonly used to print support and support interface"
msgstr ""
msgid "Temperature of vitrificaiton"
msgstr ""
msgid ""
"Material becomes soft at this temperature. Thus the heatbed cannot be hotter "
"than this tempature"
msgstr ""
msgid "Price"
msgstr ""
msgid "Filament price. For statistics only"
msgstr ""
msgid "money/kg"
msgstr ""
msgid "(Undefined)"
msgstr ""
msgid "Infill direction"
msgstr ""
msgid ""
"Angle for sparse infill pattern, which controls the start or main direction "
"of line"
msgstr ""
msgid "Sparse infill density"
msgstr ""
#, possible-c-format
msgid "Density of internal sparse infill, 100% means solid throughout"
msgstr ""
msgid "Sparse infill pattern"
msgstr ""
msgid "Line pattern for internal sparse infill"
msgstr ""
msgid "Grid"
msgstr ""
msgid "Line"
msgstr ""
msgid "Cubic"
msgstr ""
msgid "Tri-hexagon"
msgstr ""
msgid "Gyroid"
msgstr ""
msgid "Honeycomb"
msgstr ""
msgid "Adaptive Cubic"
msgstr ""
msgid "Lightning"
msgstr ""
msgid ""
"Acceleration of top surface infill. Using a lower value may improve top "
"surface quality"
msgstr ""
msgid ""
"Acceleration of initial layer. Using a lower value can improve build plate "
"adhensive"
msgstr ""
msgid "Line width of initial layer"
msgstr ""
msgid "Initial layer height"
msgstr ""
msgid ""
"Height of initial layer. Making initial layer height to be thick slightly "
"can improve build plate adhension"
msgstr ""
msgid "Adaptive layer height"
msgstr ""
msgid ""
"Enabling this option means the height of every layer except the first will "
"be automatically calculated during slicing according to the slope of the "
"model’s surface.\n"
"Note that this option only takes effect if no prime tower is generated in "
"current plate."
msgstr ""
msgid "Speed of initial layer except the solid infill part"
msgstr ""
msgid "Initial layer infill"
msgstr ""
msgid "Speed of solid infill part of initial layer"
msgstr ""
msgid "Initial layer nozzle temperature"
msgstr ""
msgid "Nozzle temperature to print initial layer when using this filament"
msgstr ""
msgid "Full fan speed at layer"
msgstr ""
msgid ""
"Randomly jitter while printing the wall, so that the surface has a rough "
"look. This setting controls the fuzzy position"
msgstr ""
msgid "None"
msgstr ""
msgid "All walls"
msgstr ""
msgid "Fuzzy skin thickness"
msgstr ""
msgid ""
"The width within which to jitter. It's adversed to be below outer wall line "
"width"
msgstr ""
msgid "Fuzzy skin point distance"
msgstr ""
msgid ""
"The average diatance between the random points introducded on each line "
"segment"
msgstr ""
msgid ""
"Speed of gap infill. Gap usually has irregular line width and should be "
"printed more slowly"
msgstr ""
msgid "Arc fitting"
msgstr ""
msgid ""
"Enable this to get a G-code file which has G2 and G3 moves. And the fitting "
"tolerance is same with resolution"
msgstr ""
msgid "Add line number"
msgstr ""
msgid "Enable this to add line number(Nx) at the beginning of each G-Code line"
msgstr ""
msgid "Scan first layer"
msgstr ""
msgid ""
"Enable this to enable the camera on printer to check the quality of first "
"layer"
msgstr ""
msgid "Nozzle type"
msgstr ""
msgid ""
"The metallic material of nozzle. This determines the abrasive resistance of "
"nozzle, and what kind of filament can be printed"
msgstr ""
msgid "Undefine"
msgstr ""
msgid "Hardened steel"
msgstr ""
msgid "Stainless steel"
msgstr ""
msgid "Brass"
msgstr ""
msgid "Enable this option if machine has auxiliary part cooling fan"
msgstr ""
msgid "G-code flavor"
msgstr ""
msgid "What kind of gcode the printer is compatible with"
msgstr ""
msgid "Infill combination"
msgstr ""
msgid ""
"Automatically Combine sparse infill of several layers to print together to "
"reduce time. Wall is still printed with original layer height."
msgstr ""
msgid "Filament to print internal sparse infill."
msgstr ""
msgid "Line width of internal sparse infill"
msgstr ""
msgid "Infill/Wall overlap"
msgstr ""
msgid ""
"Infill area is enlarged slightly to overlap with wall for better bonding. "
"The percentage value is relative to line width of sparse infill"
msgstr ""
msgid "Speed of internal sparse infill"
msgstr ""
msgid "Ironing Type"
msgstr ""
msgid ""
"Ironing is using small flow to print on same height of surface again to make "
"flat surface more smooth. This setting controls which layer being ironed"
msgstr ""
msgid "No ironing"
msgstr ""
msgid "Top surfaces"
msgstr ""
msgid "Topmost surface"
msgstr ""
msgid "All solid layer"
msgstr ""
msgid "Ironing flow"
msgstr ""
msgid ""
"The amount of material to extrude during ironing. Relative to flow of normal "
"layer height. Too high value results in overextrusion on the surface"
msgstr ""
msgid "Ironing line spacing"
msgstr ""
msgid "The distance between the lines of ironing"
msgstr ""
msgid "Ironing speed"
msgstr ""
msgid "Print speed of ironing lines"
msgstr ""
msgid "This gcode part is inserted at every layer change after lift z"
msgstr ""
msgid "Supports silent mode"
msgstr ""
msgid ""
"Whether the machine supports silent mode in which machine use lower "
"acceleration to print"
msgstr ""
msgid ""
"This G-code will be used as a code for the pause print. User can insert "
"pause G-code in gcode viewer"
msgstr ""
msgid "This G-code will be used as a custom code"
msgstr ""
msgid "Maximum speed X"
msgstr ""
msgid "Maximum speed Y"
msgstr ""
msgid "Maximum speed Z"
msgstr ""
msgid "Maximum speed E"
msgstr ""
msgid "Machine limits"
msgstr ""
msgid "Maximum X speed"
msgstr ""
msgid "Maximum Y speed"
msgstr ""
msgid "Maximum Z speed"
msgstr ""
msgid "Maximum E speed"
msgstr ""
msgid "Maximum acceleration X"
msgstr ""
msgid "Maximum acceleration Y"
msgstr ""
msgid "Maximum acceleration Z"
msgstr ""
msgid "Maximum acceleration E"
msgstr ""
msgid "Maximum acceleration of the X axis"
msgstr ""
msgid "Maximum acceleration of the Y axis"
msgstr ""
msgid "Maximum acceleration of the Z axis"
msgstr ""
msgid "Maximum acceleration of the E axis"
msgstr ""
msgid "Maximum jerk X"
msgstr ""
msgid "Maximum jerk Y"
msgstr ""
msgid "Maximum jerk Z"
msgstr ""
msgid "Maximum jerk E"
msgstr ""
msgid "Maximum jerk of the X axis"
msgstr ""
msgid "Maximum jerk of the Y axis"
msgstr ""
msgid "Maximum jerk of the Z axis"
msgstr ""
msgid "Maximum jerk of the E axis"
msgstr ""
msgid "Minimum speed for extruding"
msgstr ""
msgid "Minimum speed for extruding (M205 S)"
msgstr ""
msgid "Minimum travel speed"
msgstr ""
msgid "Minimum travel speed (M205 T)"
msgstr ""
msgid "Maximum acceleration for extruding"
msgstr ""
msgid "Maximum acceleration for extruding (M204 P)"
msgstr ""
msgid "Maximum acceleration for retracting"
msgstr ""
msgid "Maximum acceleration for retracting (M204 R)"
msgstr ""
msgid "Maximum acceleration for travel"
msgstr ""
msgid "Maximum acceleration for travel (M204 T)"
msgstr ""
msgid "Fan speed"
msgstr ""
msgid ""
"Part cooling fan speed may be increased when auto cooling is enabled. This "
"is the maximum speed limitation of part cooling fan"
msgstr ""
msgid "Max"
msgstr ""
msgid ""
"The largest printable layer height for extruder. Used tp limits the maximum "
"layer hight when enable adaptive layer height"
msgstr ""
msgid "Minimum speed for part cooling fan"
msgstr ""
msgid ""
"Speed of auxiliary part cooling fan. Auxiliary fan will run at this speed "
"during printing except the first several layers which is defined by no "
"cooling layers"
msgstr ""
msgid "Min"
msgstr ""
msgid ""
"The lowest printable layer height for extruder. Used tp limits the minimum "
"layer hight when enable adaptive layer height"
msgstr ""
msgid "Min print speed"
msgstr ""
msgid "The minimum printing speed when slow down for cooling"
msgstr ""
msgid "Nozzle diameter"
msgstr ""
msgid "Diameter of nozzle"
msgstr ""
msgid "Host Type"
msgstr ""
msgid ""
"Slic3r can upload G-code files to a printer host. This field must contain "
"the kind of the host."
msgstr ""
msgid "Nozzle volume"
msgstr ""
msgid "Volume of nozzle between the cutter and the end of nozzle"
msgstr ""
msgid "Reduce infill retraction"
msgstr ""
msgid ""
"Don't retract when the travel is in infill area absolutely. That means the "
"oozing can't been seen. This can reduce times of retraction for complex "
"model and save printing time, but make slicing and G-code generating slower"
msgstr ""
msgid "Enable"
msgstr ""
msgid "Filename format"
msgstr ""
msgid "User can self-define the project file name when export"
msgstr ""
msgid "Detect overhang wall"
msgstr ""
#, possible-c-format, possible-boost-format
msgid ""
"Detect the overhang percentage relative to line width and use different "
"speed to print. For 100%% overhang, bridge speed is used."
msgstr ""
msgid "Line width of inner wall"
msgstr ""
msgid "Speed of inner wall"
msgstr ""
msgid "Number of walls of every layer"
msgstr ""
msgid "Raft contact Z distance"
msgstr ""
msgid "Z gap between object and raft. Ignored for soluble interface"
msgstr ""
msgid "Raft expansion"
msgstr ""
msgid "Expand all raft layers in XY plane"
msgstr ""
msgid "Initial layer density"
msgstr ""
msgid "Density of the first raft or support layer"
msgstr ""
msgid "Initial layer expansion"
msgstr ""
msgid "Expand the first raft or support layer to improve bed plate adhesion"
msgstr ""
msgid "Raft layers"
msgstr ""
msgid ""
"Object will be raised by this number of support layers. Use this function to "
"avoid wrapping when print ABS"
msgstr ""
msgid "Resolution"
msgstr ""
msgid ""
"G-code path is genereated after simplifing the contour of model to avoid too "
"much points and gcode lines in gcode file. Smaller value means higher "
"resolution and more time to slice"
msgstr ""
msgid "Travel distance threshold"
msgstr ""
msgid ""
"Only trigger retraction when the travel distance is longer than this "
"threshold"
msgstr ""
msgid "Retract amount before wipe"
msgstr ""
msgid ""
"The length of fast retraction before wipe, relative to retraction length"
msgstr ""
msgid "Retract when change layer"
msgstr ""
msgid "Force a retraction when changes layer"
msgstr ""
msgid "Length"
msgstr ""
msgid "Retraction Length"
msgstr ""
msgid ""
"Some amount of material in extruder is pulled back to avoid ooze during long "
"travel. Set zero to disable retraction"
msgstr ""
msgid "Z hop when retract"
msgstr ""
msgid ""
"Whenever the retraction is done, the nozzle is lifted a little to create "
"clearance between nozzle and the print. It prevents nozzle from hitting the "
"print when travel move. Using spiral line to lift z can prevent stringing"
msgstr ""
msgid "Retraction Speed"
msgstr ""
msgid "Speed of retractions"
msgstr ""
msgid "Deretraction Speed"
msgstr ""
msgid ""
"Speed for reloading filament into extruder. Zero means same speed with "
"retraction"
msgstr ""
msgid "Seam position"
msgstr ""
msgid "The start position to print each part of outer wall"
msgstr ""
msgid "Nearest"
msgstr ""
msgid "Aligned"
msgstr ""
msgid "Back"
msgstr ""
msgid "Random"
msgstr ""
msgid "Skirt distance"
msgstr ""
msgid "Distance from skirt to brim or object"
msgstr ""
msgid "Skirt loops"
msgstr ""
msgid "Number of loops for the skirt. Zero means disabling skirt"
msgstr ""
msgid ""
"The printing speed in exported gcode will be slowed down, when the estimated "
"layer time is shorter than this value, to get better cooling for these layers"
msgstr ""
msgid "Minimum sparse infill threshold"
msgstr ""
msgid ""
"Sparse infill area which is smaller than threshold value is replaced by "
"internal solid infill"
msgstr ""
msgid "mm²"
msgstr ""
msgid "Line width of internal solid infill"
msgstr ""
msgid "Speed of internal solid infill, not the top and bottom surface"
msgstr ""
msgid "Spiral vase"
msgstr ""
msgid ""
"Spiralize smooths out the z moves of the outer contour. And turns a solid "
"model into a single walled print with solid bottom layers. The final "
"generated model has no seam"
msgstr ""
msgid ""
"If smooth or traditional mode is selected, a timelapse video will be "
"generated for each print. After each layer is printed, a snapshot is taken "
"with the chamber camera. All of these snapshots are composed into a "
"timelapse video when printing completes. If smooth mode is selected, the "
"toolhead will move to the excess chute after each layer is printed and then "
"take a snapshot. Since the melt filament may leak from the nozzle during the "
"process of taking a snapshot, prime tower is required for smooth mode to "
"wipe nozzle."
msgstr ""
msgid "Smooth"
msgstr ""
msgid "Traditional"
msgstr ""
msgid "Temperature variation"
msgstr ""
msgid "Start G-code"
msgstr ""
msgid "Start G-code when start the whole printing"
msgstr ""
msgid "Start G-code when start the printing of this filament"
msgstr ""
msgid "Slice gap closing radius"
msgstr ""
msgid ""
"Cracks smaller than 2x gap closing radius are being filled during the "
"triangle mesh slicing. The gap closing operation may reduce the final print "
"resolution, therefore it is advisable to keep the value reasonably low."
msgstr ""
msgid "Enable support"
msgstr ""
msgid "Enable support generation."
msgstr ""
msgid ""
"normal(auto) and tree(auto) is used to generate support automatically. If "
"normal or tree is selected, only support enforcers are generated"
msgstr ""
msgid "normal(auto)"
msgstr ""
msgid "tree(auto)"
msgstr ""
msgid "hybrid(auto)"
msgstr ""
msgid "normal"
msgstr ""
msgid "tree"
msgstr ""
msgid "Support/object xy distance"
msgstr ""
msgid "XY separation between an object and its support"
msgstr ""
msgid "Pattern angle"
msgstr ""
msgid "Use this setting to rotate the support pattern on the horizontal plane."
msgstr ""
msgid "On build plate only"
msgstr ""
msgid "Don't create support on model surface, only on build plate"
msgstr ""
msgid "Support critical regions only"
msgstr ""
msgid ""
"Only create support for critical regions including sharp tail, cantilever, "
"etc."
msgstr ""
msgid "Top Z distance"
msgstr ""
msgid "The z gap between the top support interface and object"
msgstr ""
msgid ""
"Filament to print support and skirt. 0 means no specific filament for "
"support and current filament is used"
msgstr ""
msgid "Line width of support"
msgstr ""
msgid "Interface use loop pattern"
msgstr ""
msgid ""
"Cover the top contact layer of the supports with loops. Disabled by default."
msgstr ""
msgid ""
"Filament to print support interface. 0 means no specific filament for "
"support interface and current filament is used"
msgstr ""
msgid "Top interface layers"
msgstr ""
msgid "Number of top interface layers"
msgstr ""
msgid "Bottom interface layers"
msgstr ""
msgid "Top interface spacing"
msgstr ""
msgid "Spacing of interface lines. Zero means solid interface"
msgstr ""
msgid "Bottom interface spacing"
msgstr ""
msgid "Spacing of bottom interface lines. Zero means solid interface"
msgstr ""
msgid "Speed of support interface"
msgstr ""
msgid "Base pattern"
msgstr ""
msgid "Line pattern of support"
msgstr ""
msgid "Rectilinear grid"
msgstr ""
msgid "Interface pattern"
msgstr ""
msgid ""
"Line pattern of support interface. Default pattern for non-soluble support "
"interface is Rectilinear, while default pattern for soluble support "
"interface is Concentric"
msgstr ""
msgid "Base pattern spacing"
msgstr ""
msgid "Spacing between support lines"
msgstr ""
msgid "Speed of support"
msgstr ""
msgid "Style"
msgstr ""
msgid "Snug"
msgstr ""
msgid "Independent support layer height"
msgstr ""
msgid ""
"Support layer uses layer height independent with object layer. This is to "
"support customizing z-gap and save print time."
msgstr ""
msgid "Threshold angle"
msgstr ""
msgid ""
"Support will be generated for overhangs whose slope angle is below the "
"threshold."
msgstr ""
msgid "Tree support branch angle"
msgstr ""
msgid ""
"This setting determines the maximum overhang angle that t he branches of "
"tree support allowed to make.If the angle is increased, the branches can be "
"printed more horizontally, allowing them to reach farther."
msgstr ""
msgid "Tree support branch distance"
msgstr ""
msgid ""
"This setting determines the distance between neighboring tree support nodes."
msgstr ""
msgid "Tree support branch diameter"
msgstr ""
msgid "This setting determines the initial diameter of support nodes."
msgstr ""
msgid "Tree support wall loops"
msgstr ""
msgid "This setting specify the count of walls around tree support"
msgstr ""
msgid "Tree support with infill"
msgstr ""
msgid ""
"This setting specifies whether to add infill inside large hollows of tree "
"support"
msgstr ""
msgid "Nozzle temperature for layers after the initial one"
msgstr ""
msgid "Nozzle temperature"
msgstr ""
msgid "Bed temperature difference"
msgstr ""
msgid ""
"Do not recommand bed temperature of other layer to be lower than initial "
"layer for more than this threshold. Too low bed temperature of other layer "
"may cause the model broken free from build plate"
msgstr ""
msgid "Detect thin wall"
msgstr ""
msgid ""
"Detect thin wall which can't contain two line width. And use single line to "
"print. Maybe printed not very well, because it's not closed loop"
msgstr ""
msgid ""
"This gcode is inserted when change filament, including T command to trigger "
"tool change"
msgstr ""
msgid "Line width for top surfaces"
msgstr ""
msgid "Speed of top surface infill which is solid"
msgstr ""
msgid "Top shell layers"
msgstr ""
msgid ""
"This is the number of solid layers of top shell, including the top surface "
"layer. When the thickness calculated by this value is thinner than top shell "
"thickness, the top shell layers will be increased"
msgstr ""
msgid "Top solid layers"
msgstr ""
msgid "Top shell thickness"
msgstr ""
msgid ""
"The number of top solid layers is increased when slicing if the thickness "
"calculated by top shell layers is thinner than this value. This can avoid "
"having too thin shell when layer height is small. 0 means that this setting "
"is disabled and thickness of top shell is absolutely determained by top "
"shell layers"
msgstr ""
msgid "Speed of travel which is faster and without extrusion"
msgstr ""
msgid "Wipe while retracting"
msgstr ""
msgid ""
"Move nozzle along the last extrusion path when retracting to clean leaked "
"material on nozzle. This can minimize blob when print new part after travel"
msgstr ""
msgid "Wipe Distance"
msgstr ""
msgid ""
"Discribe how long the nozzle will move along the last path when retracting"
msgstr ""
msgid ""
"Print a tower to prime material in nozzle after switching to a new material."
msgstr ""
msgid "Purging volumes"
msgstr ""
msgid "Prime volume"
msgstr ""
msgid "The volume of material to prime extruder on tower."
msgstr ""
msgid "Width"
msgstr ""
msgid "Width of prime tower"
msgstr ""
msgid "Flush into objects' infill"
msgstr ""
msgid ""
"Purging after filament change will be done inside objects' infills. This may "
"lower the amount of waste and decrease the print time. If the walls are "
"printed with transparent filament, the mixed color infill will be seen "
"outside"
msgstr ""
msgid "Flush into objects' support"
msgstr ""
msgid ""
"Purging after filament change will be done inside objects' support. This may "
"lower the amount of waste and decrease the print time"
msgstr ""
msgid "Flush into this object"
msgstr ""
msgid ""
"This object will be used to purge the nozzle after a filament change to save "
"filament and decrease the print time. Colours of the objects will be mixed "
"as a result"
msgstr ""
msgid "X-Y hole compensation"
msgstr ""
msgid ""
"Holes of object will be grown or shrunk in XY plane by the configured value. "
"Positive value makes holes bigger. Negative value makes holes smaller. This "
"function is used to adjust size slightly when the object has assembling issue"
msgstr ""
msgid "X-Y contour compensation"
msgstr ""
msgid ""
"Contour of object will be grown or shrunk in XY plane by the configured "
"value. Positive value makes contour bigger. Negative value makes contour "
"smaller. This function is used to adjust size slightly when the object has "
"assembling issue"
msgstr ""
msgid "Detect narrow internal solid infill"
msgstr ""
msgid ""
"This option will auto detect narrow internal solid infill area. If enabled, "
"concentric pattern will be used for the area to speed printing up. "
"Otherwise, rectilinear pattern is used defaultly."
msgstr ""
msgid "Export 3MF"
msgstr ""
msgid "Export project as 3MF."
msgstr ""
msgid "Slice the plates: 0-all plates, i-plate i, others-invalid"
msgstr ""
msgid "Show command help."
msgstr ""
msgid "Output Model Info"
msgstr ""
msgid "Output the model's information."
msgstr ""
msgid "Export Settings"
msgstr ""
msgid "Export settings to a file."
msgstr ""
msgid "Arrange Options"
msgstr ""
msgid "Arrange options: 0-disable, 1-enable, others-auto"
msgstr ""
msgid "Convert Unit"
msgstr ""
msgid "Convert the units of model"
msgstr ""
msgid "Orient the model"
msgstr ""
msgid "Repair"
msgstr ""
msgid "Repair the model's meshes if it is non-manifold mesh"
msgstr ""
msgid "Scale the model by a float factor"
msgstr ""
msgid "Load General Settings"
msgstr ""
msgid "Load process/machine settings from the specified file"
msgstr ""
msgid "Load Filament Settings"
msgstr ""
msgid "Load filament settings from the specified file list"
msgstr ""
msgid "Output directory"
msgstr ""
msgid "Output directory for the exported files."
msgstr ""
msgid "Debug level"
msgstr ""
msgid ""
"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
"trace\n"
msgstr ""
msgid "Error in zip archive"
msgstr ""
msgid "Generating walls"
msgstr ""
msgid "Generating infill regions"
msgstr ""
msgid "Generating infill toolpath"
msgstr ""
msgid "Generating support"
msgstr ""
msgid "Checking support necessity"
msgstr ""
#, possible-c-format, possible-boost-format
msgid ""
"It seems object %s has completely floating regions. Please re-orient the "
"object or enable support generation."
msgstr ""
#, possible-c-format, possible-boost-format
msgid ""
"It seems object %s has large overhangs. Please enable support generation."
msgstr ""
msgid "Optimizing toolpath"
msgstr ""
msgid "Empty layers around bottom are replaced by nearest normal layers."
msgstr ""
msgid "The model has too many empty layers."
msgstr ""
msgid "Slicing mesh"
msgstr ""
msgid " Object:"
msgstr ""
#, possible-c-format, possible-boost-format
msgid "Support: generate toolpath at layer %d"
msgstr ""
msgid "Support: detect overhangs"
msgstr ""
msgid "Support: generate contact points"
msgstr ""
msgid "Support: propagate branches"
msgstr ""
msgid "Support: draw polygons"
msgstr ""
msgid "Support: generate toolpath"
msgstr ""
#, possible-c-format, possible-boost-format
msgid "Support: generate polygons at layer %d"
msgstr ""
#, possible-c-format, possible-boost-format
msgid "Support: fix holes at layer %d"
msgstr ""
#, possible-c-format, possible-boost-format
msgid "Support: propagate branches at layer %d"
msgstr ""
Reference in a new issue View git blame Copy permalink