c30ffb1895
* Kingroon KLP1 profiles * Kingroon KP3S V1 profiles * Make cover png file size more reasonable * copy/paste error in the profile name * Merge branch 'main' into kingroon-klp1-profiles
85 lines
3.6 KiB
JSON
85 lines
3.6 KiB
JSON
{
|
|
"type": "machine",
|
|
"setting_id": "GM003",
|
|
"name": "Kingroon KP3S V1 0.4 nozzle",
|
|
"from": "system",
|
|
"instantiation": "true",
|
|
"inherits": "fdm_klipper_common",
|
|
"printer_model": "Kingroon KP3S V1",
|
|
"default_filament_profile": "Kingroon Generic PLA",
|
|
"default_print_profile": "0.20mm Standard @Kingroon KP3S V1",
|
|
|
|
"thumbnails": [ "100x100" ],
|
|
"change_filament_gcode": "",
|
|
"best_object_pos": "0.5,0.5",
|
|
"change_extrusion_role_gcode": "",
|
|
"cooling_tube_length": "0",
|
|
"cooling_tube_retraction": "0",
|
|
"deretraction_speed": [ "30" ],
|
|
"disable_m73": "0",
|
|
"emit_machine_limits_to_gcode": "1",
|
|
"enable_filament_ramming": "0",
|
|
"head_wrap_detect_zone": [],
|
|
"enable_long_retraction_when_cut": "0",
|
|
"long_retractions_when_cut": [
|
|
"0"
|
|
],
|
|
"retract_before_wipe": [ "0%" ],
|
|
"retraction_distances_when_cut": [
|
|
"18"
|
|
],
|
|
"extra_loading_move": "0",
|
|
"extruder_clearance_height_to_rod": "36",
|
|
"extruder_clearance_radius": "65",
|
|
"high_current_on_filament_swap": "0",
|
|
"machine_unload_filament_time": "0",
|
|
"min_layer_height": "0.08",
|
|
"parking_pos_retraction": "0",
|
|
"preferred_orientation": "0",
|
|
"printing_by_object_gcode": "",
|
|
"purge_in_prime_tower": "0",
|
|
"retract_lift_above": [ "0" ],
|
|
"retract_lift_below": [ "0" ],
|
|
"retract_lift_enforce": ["All Surfaces"],
|
|
"bed_exclude_area": ["0x0"],
|
|
"extruder_colour": ["#FCE94F"],
|
|
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
|
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
|
"machine_end_gcode": "G91; relative positioning\n G1 Z1.0 F3000 ; move z up little to prevent scratching of print\n G90; absolute positioning\n G1 X0 Y180 F1000 ; prepare for part removal\n M104 S0; turn off extruder\n M140 S0 ; turn off bed\n G1 X0 Y180 F1000 ; prepare for part removal\n M84 ; disable motors\n M106 S0 ; turn off fan",
|
|
"machine_max_acceleration_e": ["5000", "5000"],
|
|
"machine_max_acceleration_extruding": ["10000", "20000"],
|
|
"machine_max_acceleration_retracting": ["5000", "5000"],
|
|
"machine_max_acceleration_travel": ["20000", "20000"],
|
|
"machine_max_acceleration_x": ["10000", "20000"],
|
|
"machine_max_acceleration_y": ["10000", "20000"],
|
|
"machine_max_acceleration_z": ["500", "200"],
|
|
"machine_max_jerk_e": ["2.5", "2.5"],
|
|
"machine_max_jerk_x": ["9", "9"],
|
|
"machine_max_jerk_y": ["9", "9"],
|
|
"machine_max_jerk_z": ["0.2", "0.4"],
|
|
"machine_max_speed_e": ["100", "25"],
|
|
"machine_max_speed_z": ["12", "12"],
|
|
"machine_pause_gcode": "PAUSE",
|
|
"machine_start_gcode": "M104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nM83\nG28 ; h1ome all axes\nG1 Z0.2 ; lift nozzle a bit \nG92 E0 \nG1 Y-3 F2400 \nG1 X50 F2400 ; zero the extruded length \nG1 X115 E40 F500 ; Extrude 25mm of filament in a 5cm line. \nG92 E0 ; zero the extruded length again \nG1 E-0.2 F3000 ; Retract a little \nG1 X180 F4000 ; Quickly wipe away from the filament line\nM117",
|
|
"manual_filament_change": "0",
|
|
"nozzle_height": "4",
|
|
"nozzle_type": "brass",
|
|
"max_layer_height": ["0.32"],
|
|
"retraction_length": ["0.8"],
|
|
"retraction_speed": ["30"],
|
|
"support_air_filtration": "1",
|
|
"support_chamber_temp_control": "1",
|
|
"support_multi_bed_types": "0",
|
|
"use_firmware_retraction": "0",
|
|
"wipe": ["1"],
|
|
"z_hop": ["0"],
|
|
"z_offset": "0",
|
|
"printable_area": [
|
|
"0x0",
|
|
"180x0",
|
|
"180x180",
|
|
"0x180"
|
|
],
|
|
"printable_height": "180",
|
|
"nozzle_diameter": ["0.4"]
|
|
}
|