1998ec41c5
* fix printing parameters for Snapmaker printers * update * Update Snapmaker profiles * update end gcode
20 lines
No EOL
2.4 KiB
JSON
20 lines
No EOL
2.4 KiB
JSON
{
|
|
"type": "machine",
|
|
"from": "system",
|
|
"instantiation": "false",
|
|
"name": "fdm_a350",
|
|
"inherits": "fdm_linear2",
|
|
"bed_model": "Snapmaker A350_bed.stl",
|
|
"bed_texture": "Snapmaker A350_texture.svg",
|
|
"printable_height": "330",
|
|
"printer_notes": "PRINTER_MODEL_SNAPMAKER_A350\n",
|
|
"printable_area": [
|
|
"0x0",
|
|
"320x0",
|
|
"320x350",
|
|
"0x350"
|
|
],
|
|
"machine_start_gcode": "; Model: Snapmaker A350\n; Update: 20231019\n; Maintained by https://github.com/macdylan/3dp-configs\n; Printer : [printer_preset]\n; Profile : [print_preset]\n; Plate : [plate_name]\n\nT[initial_extruder]\n\nM140 S{first_layer_bed_temperature[initial_extruder]}\n\n; you can clean the nozzle\nM104 S165\nM204 S100\nG28\nG0 Z220 F960.0\nG0 Y175.0 F3420.0\nG0 X160.0\n\nM190 R{first_layer_bed_temperature[initial_extruder]}\n\nG28\nG0 X0\nG0 Z0.2 F960.0\nG0 Y0 F3420.0\nG0 X320\nG0 Y350\nG0 X0\nG0 Y0\n\nM83\n\nT[initial_extruder]\nG0 Z20 F960.0\nG0 X{if initial_extruder == 0}-10{else}330{endif} F3420.0\nG0 Y0\n\nM109 S{max(250, min(290, nozzle_temperature_initial_layer[initial_extruder] + 15))} C2 W1; common flush temp\nG0 E35 F80.0\n\nM106 S{min(255, (fan_max_speed[initial_extruder] + 10) * 2.55)}\nM104 S{nozzle_temperature_initial_layer[initial_extruder] + 5}\n\nG0 E35 F200\n\nG0 E-0.5 F200\nM107\n\nG0 Z0.1 F960.0\nG0 X{if initial_extruder == 0}10{else}310{endif} F3420.0\nG0 X{if initial_extruder == 0}-10{else}330{endif}\n\nG0 Z1.0 F960.0\n\nM109 S{nozzle_temperature_initial_layer[initial_extruder]} C3 W1\nG1 X{if initial_extruder == 0}150.0{else}170.0{endif} F3420.0\nG1 Z0.3 F960.0\nG1 E4 F200\nG1 X{if initial_extruder == 0}0{else}320{endif} E9.35442 F3420.0\nG1 Y11 E0.68599\nG1 X{if initial_extruder == 0}0.5{else}319.5{endif}\nG1 E0.4\nG1 Y0.8 E0.6361\nG1 X{if initial_extruder == 0}9.5{else}310.5{endif} E0.59245\nG1 E-0.5 F200\nG92 E0\n\n; ready [plate_name]",
|
|
"machine_end_gcode": "G92 E0\n\nG0 Z{max_layer_z + 0.5} F600\n; retract the filament to make it easier to replace\nG0 E-25 F200\nG28\n\n M104 S0\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;",
|
|
"before_layer_change_gcode": "; layer_num: [layer_num]\nG92 E0"
|
|
} |