7910e2aecc
* Add Creality Ender-3 S1 Plus * Misc * Fix nozzle_diameter * Add printer_variant value * Change build plate model/texture to use Ender-3 V3 SE * Enable mesh leveling * Up max travel acceleration to 5000 * Enable infill_combination * Add Draft profiles * Change buildplate model/texture * Fix build plate model * Add retraction & detraction speed & change retraction length * Add filament_ to the beginning * Revert retraction & detraction speed & retraction length * Tests Trying to change retract and detract speed as well as retraction length Also trying to have Z-hop only happen on top layers * Apply new values to other nozzles * disable z_hop * Lower build plate model * Resolve merge conflicts * temporarily remove Ender-3 S1 Plus * Re-add Ender-3 S1 Plus
117 lines
No EOL
3 KiB
JSON
117 lines
No EOL
3 KiB
JSON
{
|
|
"type": "machine",
|
|
"setting_id": "GM001",
|
|
"name": "Creality Ender-3 S1 Plus 0.2 nozzle",
|
|
"from": "system",
|
|
"instantiation": "true",
|
|
"inherits": "fdm_creality_common",
|
|
"printer_model": "Creality Ender-3 S1 Plus",
|
|
"printer_variant": "0.2",
|
|
"printer_structure": "i3",
|
|
"default_print_profile": "0.20mm Standard @Creality Ender3S1Plus 0.2",
|
|
"nozzle_diameter": [
|
|
"0.2"
|
|
],
|
|
"printable_area": [
|
|
"0x0",
|
|
"300x0",
|
|
"300x300",
|
|
"0x300"
|
|
],
|
|
"printable_height": "300",
|
|
"nozzle_type": "undefine",
|
|
"auxiliary_fan": "0",
|
|
"machine_max_acceleration_extruding": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"machine_max_acceleration_retracting": [
|
|
"1000",
|
|
"1000"
|
|
],
|
|
"machine_max_acceleration_travel": [
|
|
"5000",
|
|
"5000"
|
|
],
|
|
"machine_max_acceleration_x": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"machine_max_acceleration_y": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"machine_max_acceleration_z": [
|
|
"100",
|
|
"100"
|
|
],
|
|
"machine_max_speed_e": [
|
|
"60",
|
|
"60"
|
|
],
|
|
"machine_max_speed_x": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"machine_max_speed_y": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"machine_max_speed_z": [
|
|
"10",
|
|
"10"
|
|
],
|
|
"machine_max_jerk_e": [
|
|
"5",
|
|
"5"
|
|
],
|
|
"machine_max_jerk_x": [
|
|
"8",
|
|
"8"
|
|
],
|
|
"machine_max_jerk_y": [
|
|
"8",
|
|
"8"
|
|
],
|
|
"machine_max_jerk_z": [
|
|
"0.4",
|
|
"0.4"
|
|
],
|
|
"max_layer_height": [
|
|
"0.36"
|
|
],
|
|
"min_layer_height": [
|
|
"0.08"
|
|
],
|
|
"printer_settings_id": "Creality",
|
|
"retraction_minimum_travel": [
|
|
"1"
|
|
],
|
|
"retract_before_wipe": [
|
|
"0%"
|
|
],
|
|
"retraction_length": [
|
|
"0.4"
|
|
],
|
|
"retract_length_toolchange": [
|
|
"1"
|
|
],
|
|
"retraction_speed": [
|
|
"45"
|
|
],
|
|
"deretraction_speed": [
|
|
"45"
|
|
],
|
|
"z_hop": [
|
|
"0"
|
|
],
|
|
"single_extruder_multi_material": "1",
|
|
"change_filament_gcode": "M600",
|
|
"machine_pause_gcode": "M25",
|
|
"default_filament_profile": [
|
|
"Creality Generic PLA"
|
|
],
|
|
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling \nM420 S1; Enable mesh leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
|
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
|
"scan_first_layer": "0"
|
|
} |