41 lines
2 KiB
JSON
41 lines
2 KiB
JSON
{
|
|
"type": "machine",
|
|
"setting_id": "GM003",
|
|
"name": "Kingroon KP3S PRO V2 0.4 nozzle",
|
|
"from": "system",
|
|
"instantiation": "true",
|
|
"inherits": "fdm_klipper_common",
|
|
"printer_model": "Kingroon KP3S PRO V2",
|
|
"default_filament_profile": "Kingroon Generic PLA",
|
|
"default_print_profile": "0.20mm Standard @Kingroon KP3S PRO V2",
|
|
"bed_exclude_area": ["0x0"],
|
|
"extruder_colour": ["#FCE94F"],
|
|
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
|
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
|
"deretraction_speed": ["45"],
|
|
"machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y200 F6000 ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+20, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\nEND_PRINT",
|
|
"machine_max_acceleration_e": ["10000", "5000"],
|
|
"machine_max_acceleration_extruding": ["10000", "9000"],
|
|
"machine_max_acceleration_retracting": ["10000", "9000"],
|
|
"machine_max_acceleration_x": ["10000", "9000"],
|
|
"machine_max_acceleration_y": ["10000", "9000"],
|
|
"machine_max_acceleration_z": ["10000", "100"],
|
|
"machine_max_jerk_e": ["20", "5"],
|
|
"machine_max_jerk_x": ["20", "7"],
|
|
"machine_max_jerk_y": ["20", "7"],
|
|
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[first_layer_temperature] BED_TEMP=[first_layer_bed_temperature]\nCANCEL_POWEROFF\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nG92 E0",
|
|
"max_layer_height": ["0.32"],
|
|
"retraction_length": ["0.8"],
|
|
"retraction_speed": ["45"],
|
|
"use_firmware_retraction": "1",
|
|
"wipe": ["0"],
|
|
"z_hop": ["0"],
|
|
"printable_area": [
|
|
"0x0",
|
|
"205x0",
|
|
"205x205",
|
|
"0x205"
|
|
],
|
|
"printable_height": "200",
|
|
"nozzle_diameter": ["0.4"]
|
|
}
|