12eec78d1d
Thanks bhast2 ,these profiles are based on his original version. Signed-off-by: xun.zhang <xun.zhang@bambulab.com> Change-Id: I23dbb7d8b80b8fc37ecd76c44bf1c547413bc434 (cherry picked from commit 4a58cee3ff08fcd5f542a7779f3a1dfad46a4509)
39 lines
No EOL
1.9 KiB
JSON
39 lines
No EOL
1.9 KiB
JSON
{
|
|
"type": "machine",
|
|
"setting_id": "GM_CREALITY_009",
|
|
"name": "Creality Ender-6 0.4 nozzle",
|
|
"from": "system",
|
|
"instantiation": "true",
|
|
"inherits": "fdm_creality_common",
|
|
"nozzle_diameter": [
|
|
"0.4"
|
|
],
|
|
"printer_model": "Creality Ender-6",
|
|
"default_print_profile": "0.20mm Standard @Creality Ender6",
|
|
"extruder_type": [
|
|
"Bowden"
|
|
],
|
|
"printable_area": [
|
|
"0x0",
|
|
"250x0",
|
|
"250x250",
|
|
"0x250"
|
|
],
|
|
"printable_height": "400",
|
|
"machine_max_acceleration_travel": [
|
|
"1500",
|
|
"1250"
|
|
],
|
|
"max_layer_height": [
|
|
"0.28"
|
|
],
|
|
"printer_settings_id": "Creality",
|
|
"retract_length_toolchange": [
|
|
"1"
|
|
],
|
|
"single_extruder_multi_material": "0",
|
|
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
|
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600{endif} ; Move print bed down\nG1 X50 Y50 F{travel_speed*60} ; move print head out of the way\n{if max_layer_z < printable_height-10}G1 Z{z_offset+ printable_height-10} F600{endif} ; Move print bed close to the bottom\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
|
"change_filament_gcode": "M600",
|
|
"machine_pause_gcode": "M0"
|
|
} |