0459c28596
1. Change default ensure_vertical_shell_thickness value back to ensure_all as suggested by @igiannakas 2. Change default sparse_infill_pattern vaule to ipCrossHatch
20 lines
No EOL
849 B
JSON
20 lines
No EOL
849 B
JSON
{
|
|
"type": "process",
|
|
"name": "0.06mm High Quality @BBL A1 0.2 nozzle",
|
|
"inherits": "fdm_process_bbl_0.06_nozzle_0.2",
|
|
"from": "system",
|
|
"setting_id": "GP118",
|
|
"instantiation": "true",
|
|
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.",
|
|
"default_acceleration": "4000",
|
|
"elefant_foot_compensation": "0.075",
|
|
"initial_layer_infill_speed": "28",
|
|
"initial_layer_speed": "16",
|
|
"outer_wall_acceleration": "2000",
|
|
"outer_wall_speed": "60",
|
|
"sparse_infill_pattern": "crosshatch",
|
|
"travel_speed": "700",
|
|
"compatible_printers": [
|
|
"Bambu Lab A1 0.2 nozzle"
|
|
]
|
|
} |