52cfa48168
add some series of printer parameter configurations. 15 Geeetech printers, including 3 series models. Thunder series. A high-speed printer and the maximum printing speed can reach 300 mm/s. Mizar series. A machine that has very exquisite print quality and ultra quiet printing. Other Geeetech printers. ---Request from Geeetech offical . Co-authored-by: SoftFever <softfeverever@gmail.com>
86 lines
No EOL
2.8 KiB
JSON
86 lines
No EOL
2.8 KiB
JSON
{
|
|
"type": "process",
|
|
"name": "fdm_process_geeetech_common",
|
|
"inherits": "fdm_process_common",
|
|
"from": "system",
|
|
"instantiation": "false",
|
|
"reduce_crossing_wall": "0",
|
|
"max_travel_detour_distance": "0",
|
|
"bottom_surface_pattern": "monotonic",
|
|
"bottom_shell_layers": "3",
|
|
"bottom_shell_thickness": "0",
|
|
"bridge_flow": "1",
|
|
"bridge_speed": "25",
|
|
"brim_width": "5",
|
|
"brim_object_gap": "0.1",
|
|
"compatible_printers_condition": "",
|
|
"print_sequence": "by layer",
|
|
"default_acceleration": "500",
|
|
"top_surface_acceleration": "500",
|
|
"bridge_no_support": "0",
|
|
"draft_shield": "disabled",
|
|
"elefant_foot_compensation": "0",
|
|
"enable_arc_fitting": "0",
|
|
"outer_wall_line_width": "0.4",
|
|
"wall_infill_order": "inner wall/outer wall/infill",
|
|
"line_width": "0.4",
|
|
"infill_direction": "45",
|
|
"sparse_infill_density": "15%",
|
|
"sparse_infill_pattern": "grid",
|
|
"initial_layer_acceleration": "500",
|
|
"travel_acceleration": "700",
|
|
"inner_wall_acceleration": "500",
|
|
"initial_layer_line_width": "0.5",
|
|
"initial_layer_print_height": "0.2",
|
|
"infill_combination": "0",
|
|
"sparse_infill_line_width": "0.45",
|
|
"infill_wall_overlap": "23%",
|
|
"interface_shells": "0",
|
|
"ironing_flow": "15%",
|
|
"ironing_spacing": "0.1",
|
|
"ironing_speed": "15",
|
|
"ironing_type": "no ironing",
|
|
"reduce_infill_retraction": "1",
|
|
"filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode",
|
|
"detect_overhang_wall": "1",
|
|
"overhang_1_4_speed": "0",
|
|
"overhang_2_4_speed": "20",
|
|
"overhang_3_4_speed": "15",
|
|
"overhang_4_4_speed": "10",
|
|
"inner_wall_line_width": "0.45",
|
|
"wall_loops": "3",
|
|
"print_settings_id": "",
|
|
"raft_layers": "0",
|
|
"seam_position": "aligned",
|
|
"skirt_distance": "2",
|
|
"skirt_height": "1",
|
|
"skirt_loops": "1",
|
|
"minimum_sparse_infill_area": "15",
|
|
"internal_solid_infill_line_width": "0.4",
|
|
"spiral_mode": "0",
|
|
"standby_temperature_delta": "-5",
|
|
"enable_support": "0",
|
|
"resolution": "0.012",
|
|
"support_top_z_distance": "0.2",
|
|
"support_interface_speed": "80",
|
|
"support_speed": "100",
|
|
"top_surface_pattern": "monotonic",
|
|
"top_surface_line_width": "0.4",
|
|
"top_shell_layers": "3",
|
|
"top_shell_thickness": "0.8",
|
|
"initial_layer_speed": "15",
|
|
"initial_layer_infill_speed": "20",
|
|
"outer_wall_speed": "30",
|
|
"inner_wall_speed": "50",
|
|
"internal_solid_infill_speed": "50",
|
|
"top_surface_speed": "30",
|
|
"gap_infill_speed": "50",
|
|
"sparse_infill_speed": "60",
|
|
"travel_speed": "150",
|
|
"enable_prime_tower": "0",
|
|
"small_perimeter_threshold": "5",
|
|
"wipe_tower_no_sparse_layers": "0",
|
|
"prime_tower_width": "35",
|
|
"xy_hole_compensation": "0",
|
|
"xy_contour_compensation": "0"
|
|
} |