{
  "type": "machine",
  "setting_id": "GM_GEEETECH_003",
  "name": "Geeetech Thunder 0.6 nozzle",
  "from": "system",
  "instantiation": "true",
  "inherits": "fdm_geeetech_common",
  "printer_model": "Geeetech Thunder",
  "default_filament_profile": ["Generic PLA @Geeetech_FastSpeed"],
  "extruder_type": ["Bowden"],
  "nozzle_diameter": ["0.6"],
  "printer_variant": "0.6",
  "default_print_profile": "0.30mm Standard @Geeetech Thunder 0.6 nozzle",
  "max_layer_height": ["0.42"],
  "min_layer_height": ["0.12"],
  "printable_area": [
    "0x0",
    "250x0",
    "250x250",
    "0x250"
  ],
  "printable_height": "260",
  "retract_lift_below":["259"],
    "machine_max_acceleration_extruding": [
		"3500",
		"3500"
	],
	"machine_max_acceleration_retracting": [
		"3500",
		"3500"
	],
	"machine_max_acceleration_travel": [
		"5000",
		"5000"
	],
	"machine_max_acceleration_x": [
		"5000",
		"5000"
	],
	"machine_max_acceleration_y": [
		"4000",
		"4000"
	],
	"machine_max_acceleration_z": [
		"50",
		"50"
	],
	"machine_max_speed_e": [
		"35",
		"35"
	],
	"machine_max_speed_x": [
		"300",
		"300"
	],
	"machine_max_speed_y": [
		"300",
		"300"
	],
	"machine_max_speed_z": [
		"10",
		"10"
	],
	"machine_max_jerk_e": [
		"8",
		"8"
	],
	"machine_max_jerk_x": [
		"45",
		"45"
	],
	"machine_max_jerk_y": [
		"45",
		"45"
	],
	"machine_max_jerk_z": [
		"0.8",
		"0.8"
	],
    "machine_start_gcode": ";Official viki homepage for Thunder:https://www.geeetech.com/wiki/index.php/Geeetech_Thunder_3D_printer\n\nM104 S[first_layer_temperature] ; Set Hotend Temp.\nM140 S[first_layer_bed_temperature] ; Set bed Temp.\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temp.\nM109 S[first_layer_temperature] ; Wait for Hotend Temp.\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\nG1 Z5.0 F3000 ;Move the Z-axis slightly up to prevent scratching the heatbed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move the Z-axis slightly up to prevent scratching the heatbed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue\nG92 E0\n;---------------------------------------\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\n;---------------------------------------",
    "machine_end_gcode": "G91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers",
    "nozzle_type": "brass",
    "auxiliary_fan": "1"
}