{
    "type": "filament",
    "setting_id": "GFSA04",
    "name": "Prusament PVB @XL",
    "from": "system",
    "instantiation": "true",
    "inherits": "fdm_filament_pvb",
    "nozzle_temperature_intial_layer": "215",
    "nozzle_temperature": "215",
    "hot_plate_temp_initial_layer": "75",
    "hot_plate_temp": "75",
    "slow_down_min_speed": "15",
    "filament_flow_ratio": [
        "1"
    ],
    "filament_max_volumetric_speed": [
        "8"
    ],
    "slow_down_layer_time": [
        "10"
    ],
    "fan_max_speed": [
        "100"
    ],
    "fan_min_speed": [
        "100"
    ],
    "overhang_fan_speed": [
        "100"
    ],
    "close_fan_the_first_x_layers": [
        "1"
    ],
    "full_fan_speed_layer": [
        "3"
    ],
    "filament_loading_speed_start": "50",
    "filament_loading_speed": "10",
    "filament_unloading_speed_start": "100",
    "filament_unloading_speed": "100",
    "filament_load_time": "10.5",
    "filament_unload_time": "8.5",
    "filament_cooling_moves": "2",
    "filament_cooling_initial_speed": "10",
    "filament_cooling_final_speed": "3.5",
    "filament_retract_lift_below": "0.6",
    "filament_start_gcode": ["; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"],
    "compatible_printers": [
        "Prusa XL 0.25 nozzle",
        "Prusa XL 0.3 nozzle",
        "Prusa XL 0.4 nozzle",
        "Prusa XL 0.5 nozzle",
        "Prusa XL 0.6 nozzle",
        "Prusa XL 0.8 nozzle"
    ]
}