{
    "type": "process",
    "compatible_printers": [
      "Kingroon KP3S 3.0 0.4 nozzle"
    ],
    "name": "0.30mm Standard @Kingroon KP3S 3.0",
    "inherits": "fdm_process_common",
    "print_settings_id": "0.30mm Standard @Kingroon KP3S 3.0",
    "bottom_surface_pattern": "monotonicline",
    "bridge_acceleration": "500",
    "bridge_speed": "30",
    "brim_type": "no_brim",
    "default_acceleration": "500",
    "detect_narrow_internal_solid_infill": "0",
    "dont_filter_internal_bridges": "limited",
    "elefant_foot_compensation": "0.2",
    "enable_prime_tower": "1",
    "enable_support": "0",
    "filter_out_gap_fill": "0.9",
    "flush_into_support": "0",
    "from": "User",
    "gap_fill_target": "topbottom",
    "gap_infill_speed": "40",
    "infill_combination": "1",
    "initial_layer_acceleration": "500",
    "initial_layer_infill_speed": "50",
    "initial_layer_print_height": "0.3",
    "initial_layer_speed": "20",
    "initial_layer_travel_speed": "250",
    "inner_wall_acceleration": "700",
    "inner_wall_line_width": "0.44",
    "inner_wall_speed": "70",
    "internal_bridge_speed": "50",
    "internal_solid_infill_acceleration": "2000",
    "internal_solid_infill_line_width": "0.5",
    "internal_solid_infill_pattern": "monotonicline",
    "internal_solid_infill_speed": "70",
    "is_custom_defined": "0",
    "layer_height": "0.3",
    "line_width": "0.44",
    "max_travel_detour_distance": "70",
    "max_volumetric_extrusion_rate_slope": "20",
    "outer_wall_acceleration": "500",
    "outer_wall_line_width": "0.44",
    "outer_wall_speed": "50",
    "overhang_1_4_speed": "70%",
    "overhang_2_4_speed": "50%",
    "overhang_3_4_speed": "30%",
    "overhang_4_4_speed": "20%",
    "prime_tower_brim_width": "1",
    "prime_tower_width": "20",
    "prime_volume": "30",
    "raft_first_layer_density": "100%",
    "reduce_crossing_wall": "1",
    "reduce_infill_retraction": "0",
    "scarf_joint_speed": "70",
    "seam_gap": "0",
    "seam_slope_entire_loop": "1",
    "seam_slope_start_height": "0.1",
    "skirt_loops": "1",
    "sparse_infill_acceleration": "1500",
    "sparse_infill_line_width": "0.5",
    "sparse_infill_pattern": "3dhoneycomb",
    "sparse_infill_speed": "70",
    "support_base_pattern": "default",
    "support_interface_pattern": "auto",
    "support_interface_speed": "40",
    "support_line_width": "0.44",
    "support_speed": "70",
    "support_threshold_angle": "40",
    "support_type": "normal(auto)",
    "top_surface_acceleration": "500",
    "top_surface_line_width": "0.44",
    "top_surface_pattern": "monotonicline",
    "top_surface_speed": "40",
    "travel_acceleration": "4000",
    "travel_speed": "250",
    "tree_support_angle_slow": "35",
    "tree_support_branch_angle_organic": "45",
    "tree_support_branch_diameter_double_wall": "5",
    "tree_support_tip_diameter": "1",
    "tree_support_top_rate": "50%",
    "version": "2.0.0.0",
    "wall_transition_angle": "59",
    "wipe_before_external_loop": "1",
    "wipe_tower_bridging": "2"
}