{
	"type": "machine",
	"setting_id": "GM001",
	"name": "Qidi X-Plus 0.4 nozzle",
	"from": "system",
	"instantiation": "true",
	"inherits": "fdm_qidi_common",
	"printer_model": "Qidi X-Plus",
	"default_print_profile": "0.20mm Standard @Qidi XPlus",
	"nozzle_diameter": [
		"0.4"
	],
	"printable_area": [
		"0x0",
		"270x0",
		"270x200",
		"0x200"
	],
	"printable_height": "200",
	"nozzle_type": "hardened_steel",
	"auxiliary_fan": "0",
	"machine_max_acceleration_extruding": [
		"1500",
		"1250"
	],
	"machine_max_acceleration_retracting": [
		"1500",
		"1250"
	],
	"machine_max_acceleration_travel": [
		"1500",
		"1250"
	],
	"machine_max_acceleration_x": [
		"9000",
		"1000"
	],
	"machine_max_acceleration_y": [
		"9000",
		"1000"
	],
	"machine_max_acceleration_z": [
		"500",
		"200"
	],
	"machine_max_speed_e": [
		"120",
		"120"
	],
	"machine_max_speed_x": [
		"500",
		"200"
	],
	"machine_max_speed_y": [
		"500",
		"200"
	],
	"machine_max_speed_z": [
		"12",
		"12"
	],
	"machine_max_jerk_e": [
		"2.5",
		"2.5"
	],
	"machine_max_jerk_x": [
		"10",
		"10"
	],
	"machine_max_jerk_y": [
		"10",
		"10"
	],
	"machine_max_jerk_z": [
		"0.2",
		"0.4"
	],
	"max_layer_height": [
		"0"
	],
	"min_layer_height": [
		"0.07"
	],
	"printer_settings_id": "Qidi",
	"retraction_minimum_travel": [
		"2"
	],
	"retraction_length": [
		"2"
	],
	"retract_length_toolchange": [
		"2"
	],
	"deretraction_speed": [
		"0"
	],
	"single_extruder_multi_material": "0",
	"change_filament_gcode": "",
	"machine_pause_gcode": "M0",
	"default_filament_profile": [
		"Qidi Generic PLA"
	],
	"machine_start_gcode": "G28\nG92 E0\nG0 X270 Y5 Z50 F3600\nM190 S[bed_temperature_initial_layer_single]\nM109 S[first_layer_temperature]\nG92 E-16\n",
	"machine_end_gcode": "M104 S0\nM140 S0\n;Retract the filament\nG92 E0\nG1 E-3 F300\nG28\nM84\n",
	"scan_first_layer": "0"
}